Just picked up a playmatic Last lap the only problem
It is missing the pedestal" which supports the backbox
I'm going to make one up any one have the measurements for it. Thanks in advance.
Raff
You're currently viewing posts by Pinsider Raff.
Click here to go back to viewing the entire thread.
Just picked up a playmatic Last lap the only problem
It is missing the pedestal" which supports the backbox
I'm going to make one up any one have the measurements for it. Thanks in advance.
Raff
Quoted from jaytrem:I can send pics and measurements
That would be great thanks.
Raff
The light sockets they used are rubbish .There was 2 light sockets causing the fuse to blow because they were shorting out.
The clear coat they used on the Playfield is good this playfield looks like it just came out of the factory.
The roll over switches are held together by pivot and weaken over time and start to fall apart but it's a easy fix drill the pivots out and replace with screws. I have worked on a fandago and a conquest and they are all great machines to play. I'm after a schematic for this last lap .
Raff
You're currently viewing posts by Pinsider Raff.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/playmatic-how-good-are-their-pinball-machines?tu=Raff and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.