In order to improve the Playfield Protectors experience we share some documents with you. Our new section Documents will be updated regularly with more information and especially quick tips. Each document will be available in english and german.
https://www.playfield-protectors.com/about/Docs

Please subscribe to our newsletter so we can keep you updated.
https://www.playfield-protectors.com/newsletter

Installation Guide
Each pinball machine is a bit different regarding the installation of a playfield protector. Our basic installation guide helps to understand how to proceed in general.
https://www.playfield-protectors.com/docs/PP_Installation_Guide_20171026.pdf

We will add pinball machine or part specific quick tips starting with our first "Quick Tip | Target Bank - PinBot".
https://www.playfield-protectors.com/docs/PP_QuickTip_TargetBank_Pinbot.pdf

Please be aware it is just a start...

#2 6 years ago

protectors

Playfield Protectors

München

7y 36,550 344

Added Quick Tip | Target Bank - AFM
https://www.playfield-protectors.com/docs/PP_QuickTip_TargetBank_AFM.pdf

#3 6 years ago

ORB

Orbian

Pinside+ Frequent

12y 54,050 178 1

Hello!

I sent you an e-mail over a year ago and never received a response. I have a playfield protector installed on a WOZ. This was done by one of Jersey Jacks Distributors. They did not clean the playfield before installing the protector. I would like to remove it and clean the ball trails off of the playfield and reinstall the protector. I was told by Jersey Jack support, the only way to remove it would be to cut it off. Is this true?

I also have a problem with removing the playfield apron. The protector is to thick and does not allow the playfield apron to slide over it. Because of this I cannot get under the apron to adjust the ball kick out. No body seems to want to support your product! Can you help me?

1 week later

#4 6 years ago

ORB

Orbian

Pinside+ Frequent

12y 54,050 178 1

Crickets once again! I find there is absolutely no support for this product. Nobody responds to any messages, including direct e-mails. Buyer beware!

#5 6 years ago

S V

solarvalue

Pinside member

11y 107K 3,514 8

Quoted from Orbian:
I was told by Jersey Jack support, the only way to remove it would be to cut it off. Is this true?

Not true. You can remove just enough of the topside components to allow you to remove the protector. On most games, this is usually just the plastics, ball gates and maybe some rubbers but I'm not sure about on WOZ specifically.

Quoted from Orbian:
I also have a problem with removing the playfield apron. The protector is to thick and does not allow the playfield apron to slide over it.

If you could manage to lift up the lower half of the protector, you should then be able to slide the apron off.

1 week later

#6 6 years ago

protectors

Playfield Protectors

München

7y 36,550 344

Quoted from Orbian:
Crickets once again! I find there is absolutely no support for this product. Nobody responds to any messages, including direct e-mails. Buyer beware!

Sorry - we do not check regularly on pinside. Please use [email protected] or send a pm - your email/pm will be answered. Wondering why emails got lost... really sorry that.

Back to the topic... yes the protector can be removed just like it can be installed. On a WOZ it is actually quite some work to do - unfortunately. Other machines require less effort.

If you have a compressor you can lift the protector and blow dirt away... maybe this can help also without removing the complete protector.

1 week later

#7 6 years ago

protectors

Playfield Protectors

München

7y 36,550 344

Added Quick Tip | MM
https://www.playfield-protectors.com/docs/PP_QuickTip_MM.pdf

This illustrates what to remove to install a playfield protector on a Medieval Madness.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/playfield-protectors-new-section-docs-eg-installation-guide and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.