Playfield Protectors - Iron Maiden | all versions now shipping

We will directly import the upcoming pinball machines in order to deliver our protectors as close to the release date as possible.

Iron Maiden (Pro) playfield protectors... now shipping
https://www.playfield-protectors.com/Home/Details/ugLj-ajIH0q4qOWs_LvVxQ

Iron Maiden (Premium) playfield protectors... now shipping
https://www.playfield-protectors.com/Home/Details/xPJx7t9-6EyuZHIMyPRL8A

Iron Maiden (Limited) playfield protectors... now shipping
https://www.playfield-protectors.com/Home/Details/yMsl5ybrMkKGFBDJ5jqdag

Post last edited 5 years ago.

2 weeks later

#2 6 years ago

protectors

Iron Maiden hit our shop floor... we are testing right now.
Shipment will start latest on Wednesday.

#3 6 years ago

protectors

Not only the playfield protector is now shipping but also our new product category Colored Plastics...

Colored Plastic Set
https://www.playfield-protectors.com/Home/Details/MfkA4xRMeEaJXRiwRSwxwA
Colored Plastic Pharaoh - Orange
https://www.playfield-protectors.com/Home/Details/frgQQmBjn0q1H2D4f3CJNQ
Colored Plastic Pharaoh - Yellow
https://www.playfield-protectors.com/Home/Details/Jw5GGE2M-Ui_QD42c8o7sg
Plaque Plastic Stern - Red (multiple colors available)
https://www.playfield-protectors.com/Home/Details/TFaq2XQT2E6OyWEroyG2fQ

#4 6 years ago

protectors

pp_colored_plastics_001 (resized).jpg

pp_colored_plastics_002 (resized).jpg

pp_colored_plastics_003 (resized).jpg

pp_colored_plastics_004 (resized).jpg

pp_colored_plastics_005 (resized).jpg

pp_colored_plastics_007 (resized).jpg

pp_colored_plastics_006 (resized).jpg

pp_colored_plastics_009 (resized).jpg

pp_colored_plastics_008 (resized).jpg

pp_colored_plastics_010 (resized).jpg

pp_colored_plastics_011 (resized).jpg

pp_colored_plastics_012 (resized).jpg

pp_colored_plastics_013 (resized).jpg

pp_colored_plastics_015 (resized).jpg

pp_colored_plastics_014 (resized).jpg

pp_colored_plastics_016 (resized).jpg

pp_colored_plastics_017 (resized).jpg

pp_colored_plastics_018 (resized).jpg

1 month later

#5 5 years ago

protectors

All preorders (Premium und LE) were shipped today...

#6 5 years ago

GUI

metwurcht

Pinside member

Aillevans

6y 27,150 71 7

hello

can you post pictures of the premium version ? newton ball area and underworld . please .

is it necessary to dismount the newton ball ?

regards

1 week later

#7 5 years ago

GUI

metwurcht

Pinside member

Aillevans

6y 27,150 71 7

1 month later

#8 5 years ago

protectors

Deadpool is coming up... but Maiden still rocks

10 months later

#9 4 years ago

MJR

mjruser

Inactive member

Vancouver, WA

14y 49,150 164 1 7

Hello,

Is there any installation instructions that you can point me to? If anyone has installed one on IM Prem, what was it like?

Thanks,
Mike

#10 4 years ago

DWF

Chalkey

Pinside+ Frequent

Chesterfield, VA

6y 69,550 2,972 18

I did a pro but it will be very similar. You basically have to remove all the plastics on the lower PF as well as the ramps, flippers, and any spinners or gates. This isn't too much. The ramps will have wires from lights and switches attached to the bottom of the playfield that are connected with molex Z connectors. I like to label each side of the connector with a number before I disconnect it so there is no doubt which connector goes where. Fishing them through the playfield on reinstallation can be the tricky part. All in all, it's not too tough a process just time consuming. Don't forget to clean your playfield with naptha before installing to remove any wax.

3 weeks later

#11 4 years ago

protectors