Brand New Playfield Protector for Bally Indianapolis 500" Pinball Machine.

NEW - Next Generation Playfield Protector

Reduction of thickness – now only 0.5mm (0.02‘‘)

We started in 2013 with our first generation playfield protector, now it is time to move one step forward.

The Next Generation Playfield Protector is made of Vivak (PET-G), which allows us to reduce thickness and improve the edges by using CNC lasers instead of CNC molding cutters. The new surface is now even more transparent with still being glossy.

Our playfield protectors are precut protectors, which fit individually to each pinball machine type.

Forget about mylar, which offers just a partial protection and can be very, very hard to be removed without damaging your precious playfield.

Forget about clearcoating – clearcoating is, if correctly done, a long term project. Your pinball machine is out of service for several months. You have to level your inserts and still there can be air between the insert and the clearcoat which can result in unwanted „instransparent“ areas. And clearcoating is no protection to avoid dimples!

Depending on the particular pinball machine, a protector can be installed within a few hours including cleaning, which should be done in parallel. The playfield needs to be partially stripped down, so that the protector can be easily placed on the playfield.

· Individually adapted for specific pinball machine types
· Brilliant look
· Quick Installation
· Long time protection
· Balls roll smoother
· Protectors reduces unevenness (i.e. unlevelled inserts)
· NEW - Vivak Material (PET-G)
· NEW - now only 0.5mm (0.02‘‘) thickness
· NEW - even less visible
· NEW - less adjusting of swittches etc.
· NEW - no swarf

It is highly recommended to also replace rubbers and all balls to have the best long term results…