I bought this machine back in 2012 for a good price but the machine did not work. It was missing a DMD. The machine would not light up or play. Someone even stole the Plunger launch gauge cover(seller didn't tell me until I picked it up) (I actually think i bought the cover from the guy who stole it because he lived 25 miles from seller of machine. Long story short.. A gentleman came out to help fix machine but ended up taking parts from it.)
I got the machine up and running after checking fuses and replacing missing cr2325 battery on main board. I bought a DMD, replaced plunger launch cover(I still need to paint to specs).
Machine plays fully except I have two problems:
1.The plunger doesn't have enough power to get the pinball on the playfield every time plunged.
2.The DMD doesn't work correctly. I checked the voltage to the pins on the connector and there are missing voltages where there should be voltage. I replaced board with one from PSPA Australia (I bought extra boards just in case I would need them in the future) and the DMD and voltage still didn't register correctly. I think i have a faulty transformer?
Any thoughts or ideas on how to fix the machine or what I should look at?