This is a new one for me with the stern games. Seams like everyhting on the same drive for the switches does not register. Green yellow stripe, ship switches, green stand ups, ship hit opto, jack are all not working. the other switch lines all seam to work. I did lose the coil on the sails and had to replace the coil and the trans on the driver board. put it back in the ship acted odd, checked and none of the switches register but all test fine on meter. any ideas what could be going on here?

nope have connection from switch to j1 and j1 the feeds is plugged in so are the returns. checked wires from a couple switches back to the j1 feed...connected.

none of them active if that is what you mean.

could it be the transistor on that line? i have never had one fail before, and the game was working fine till the coil shorted out and wiped out the transistor on the driver board. just seams odd to me that i would lose the entire line on that one switch drive....not one switch works and none of them appear shorted to ground.