Pinstadium Installation Issue

(Topic ID: 208751)

Pinstadium Installation Issue


By PokerJake

7 months ago



Topic Stats

  • 7 posts
  • 4 Pinsiders participating
  • Latest reply 4 months ago by chuckwurt
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

There have been 4 images uploaded to this topic. (View topic image gallery).

20180130_223424 (resized).jpg
20180130_223456 (resized).jpg
20180130_223500 (resized).jpg
20180130_142607 (resized).jpg

#1 7 months ago

I'm having an issue installing pinstadium lights into my Roadshow. I'm connecting the lights through j118 on the mpu to get gi effects, but it takes a minute or two to boot and there is nothing being displayed on the DMD. The game sometimes won't even boot unless the large ribbon cable is disconnected from the top left of the display board. When I disconnect pinstadium from j118 and attach the original it boots up normal with display. I'm at a loss of what could cause this. In either effect the game appears to play normal.

20180130_142607 (resized).jpg

#2 7 months ago

Post here, but it sounds like you have power issues. Might need to switch to the service outlet.

https://pinside.com/pinball/forum/topic/new-pin-stadium-lights-official-announcement/page/28#post-4204494

#3 7 months ago

Thanks for the suggestion, will do. Also there are only 2 wires connecting the 3 pin plugs. Is there supposed to be 3 wires? Here's some photos:

20180130_223500 (resized).jpg

20180130_223456 (resized).jpg

20180130_223424 (resized).jpg

#4 7 months ago

Solved, attached it through j116 instead.

#5 7 months ago

board needs work. Probably should have just yelled at Scott.

3 months later
#6 4 months ago

Does anyone have any info on an install on a spiderman ve? My lighting controller works in the sense I can see the leds change colors and the white will go up and down. But when it's at 0 percent or I power it off, I still have purple/pink lighting.. I've switched things back and forth and still the same result. Any help would be great! I have already emailed them.

#7 4 months ago
Quoted from Jneiport:

Does anyone have any info on an install on a spiderman ve? My lighting controller works in the sense I can see the leds change colors and the white will go up and down. But when it's at 0 percent or I power it off, I still have purple/pink lighting.. I've switched things back and forth and still the same result. Any help would be great! I have already emailed them.

Sounds like you hooked the flasher clips to a GI bulb. Where did you hook up those wires? Got a picture with the playfield upright showing where you hooked up the GI lights and the flasher lights?

Promoted items from the Pinside Marketplace
$ 40.00
Lighting - Other
Rock Custom Pinball
From: $ 29.00
Boards
KAHR.US Circuits
$ 62.95
Cabinet - Shooter Rods
Super Skill Shot Shop
$ 29.99
Lighting - Interactive
Lee's Parts
$ 16.00
Electronics
Yorktown Parts and Equip
$ 35.00
Electronics
Ewe22 Security PIC Chips
From: $ 20.00
Playfield - Decals
Flashinstinct
$ 62.95
Cabinet - Shooter Rods
Super Skill Shot Shop
€ 40.00
3,200
Machine - For Sale
Los Angeles, CA
$ 75.00
Playfield - Other
Great American Pinball
€ 3.70
$ 11.95
Playfield - Toys/Add-ons
ULEKstore
$ 27.99
Lighting - Interactive
Lee's Parts
From: $ 369.95
Boards
PinSound
From: $ 16.95
$ 11.95
3,600
Machine - For Sale
Stafford, VA
From: $ 9.99
Eproms
Matt's Basement Arcade
$ 115.00
Playfield - Other
Great American Pinball
$ 89.95
Cabinet - Shooter Rods
Super Skill Shot Shop
From: $ 9.99
Eproms
Matt's Basement Arcade

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside