Howell, MI
Quoted from paynemic:Just installed a pinsound on my lotr. I have done this before on desw, ij, and another lotr with no problems. This one is proving tough. I could use help with a couple questions:
First, this lotr has pinball pro speakers installed. The connector that goes on the board only has four wires (it leaves two pins bare on the board). On the original setup (before I added pinsound) I had all three speakers making sound. Now it’s hooked to pinsound, I only have left and cabinet sound. Do I need a different wiring harness to go to the pinsound? I’m unfamiliar with pinballpro’s setup.
Second: Pinsound seems to boot, and makes the normal beeping and happy boot sound, then just kinda trails off and makes no sound. The game is silent after that. I’m using the wool mix decompressed and loaded onto the stock flash drive that comes with the pinsound using the studio software. Full disclosure I have a colordmd that could be straining the electrical, but I disconnected it and have the same problem. It previously said something like no wave files detected but then I used the pinsound studio and it just goes quiet. No game sounds.
Thanks in advance for your responses
Pinsound sells a 2.1 stereo harness you need to purchase. It’s plug and play that way.
Barrie, ON
