(Topic ID: 297596)
Collingwood, ON
Brick, NJ
Quoted from Skidave:I have this brand new tool case if anyone is interested. Make me an offer.
[quoted image][quoted image]
I thought you were going to say I have this suitcase filled with cash so I'm ready to buy a stern Pro lol
Quoted from dannunz:I thought you were going to say I have this suitcase filled with cash so I'm ready to buy a stern Pro lol
I'd be living in the cardboard box the pin shipped in because my wife would divorce me.
Seriously, someone make an offer on this tool case. It's in my way, but I refuse to throw it out.
I'll be in the flea market again this year although it will be scaled back from last year since my buddy WeatherbyMAG can't set up with me again. Stuff I can bring:
1) Bally Wizard OE BG- near mint, will seal and install new trim $275
2) Gottlieb Volley BG- has wear, 6/10. Will seal before show. $65 *SOLD*
3) Gottlieb Gridiron BG- has wear 5/10 Wall hanger $50
I have a couple games I could have finished.
1) Bally Medusa- Good player's condition. Most boards are new. LED's. PF has mylar, I'm shopping it now. BG is nice, 8/10. Will be around $3200 when done. Will trade +/- cash depending on condition for a 1981 Bally EBD or Bally Rolling Stones. I plan on a full restore on either of those titles so beater games with cash are preferred.
2) Bally Bobby Orr- Good player's condition. Decent PF & BG. Average cabinet. Will have shopped and 100%. $1750. Same trade option as above applies.
Rather than clog up the thread with multiple pics, PM me for pics.
Looking for the following titles for pickup at Pinfest
Mata Hari (working or project)
Funhouse (working or project)
Attack from Mars (Bally - working or project)
Spooky Pinball - Alice Cooper
Star Trek Premium or LE
Is anyone going to Pinfest and then back to Oklahoma?
I am hoping to send a stack of Canadian Coinbox (arcade operator) magazines down South with someone from Ottawa, and then get them to Yukon, Oklahoma where they can be scanned and made available for everyone online.
See here for more details on this effort:
http://pinballnovice.blogspot.com/2022/03/canadian-coinbox-archival-project.html
Please let me know if you can assist some nonprofit arcade research nerds 
Quoted from Skidave:I'd be living in the cardboard box the pin shipped in because my wife would divorce me.
Seriously, someone make an offer on this tool case. It's in my way, but I refuse to throw it out.
i’ll give you 10 dollars for it. i’ll be at pinfest on friday
First time Pinfester here, so this may be a dumb question... Among the many expensive things I want, I'll be looking for 1-2 sets of cheap score reels to build a manual score keeper for my shuffleboard table. Are there enough junk parts vendors to make my question irrelevant?
Also: Does anyone have a Subway (or another quality AAB) with a "reasonable-to-good" playfield to sell? I'm more than willing to put in the work, as needed.
Thanks
Quoted from DorkInAbox:Wife has also approved a Houdini or a Stern POTC.
I have a Firepower back glass I can bring with the typical flaking in the ships, only good for a wall hanger or if you're missing one, $50.
I also have a Rottendog MPU 9211 with Space Shuttle roms from Big Daddy Enterprises that I bought for troubleshooting but dont need to keep, $350. MPU is spoken for.
And a set of blue Xpin Williams system 7-9 LED displays + master display board, unused other than troubleshooting as well, $200
Edit: I will be there all 3 days.
[quoted image][quoted image]
Looking for Sky Jump / Free Fall plastics
Wife has un-approved Houdini, so currently looking to pick up one of the following:
TX Sector, Stern POTC, Whirlwind, TNA, Fireball, Flight 2000, Special Force, Genie.
Only going to have room for one. Still have the Firepower back glass and Xpin displays for sale. Both my Stern Star Trek Pro and Duotron are still available.
Quoted from LoudBeardyHatGuy:First time Pinfester here, so this may be a dumb question... Among the many expensive things I want, I'll be looking for 1-2 sets of cheap score reels to build a manual score keeper for my shuffleboard table. Are there enough junk parts vendors to make my question irrelevant?
Also: Does anyone have a Subway (or another quality AAB) with a "reasonable-to-good" playfield to sell? I'm more than willing to put in the work, as needed.
Thanks
I think there are, yes. The flea market area offers a such wide variety of miscellaneous items that you shouuld be able to find something that will work for you.
Chris
Few items I can bring to Pinfest.
- Gottlieb Rock original Translite asking $80
- Gottlieb Rock original plastic set (one piece broken, one glued) asking $70, very rare and complete 11 piece set.
- AC/DC Pro Stern Original Translite asking $80
PM if interested. Thanks.
05B8C7DD-22F6-4BBB-AF16-1AB6CA772228 (resized).jpeg20C2E4C6-F607-4131-9C1A-4809F4969A9D (resized).jpeg20E13D20-B74F-4A82-8539-5C94EA0B4958 (resized).jpeg
Its looking like I probably won't make it to allentown this year. My driving partner wont' be able to make it and I can't drive that far by myself very easily 
Quoted from Pinball_Basement:Its looking like I probably won't make it to allentown this year. My driving partner wont' be able to make it and I can't drive that far by myself very easily
Let's go Minnesota people, this man needs a carpool partner. Help a fellow pinhead out...
I have will have the following Pinball Machine Custom Backbox Light Kits from Lermods available at the show at my Vintage Pinball shop vendor space.
TMNNT LE
Star Trek LE from Cointaker has interactive Flashers
GOTG LE
JP LE
EHOH
Stanger things LE
BKSR LE
DP LE
Munsters LE
SW Pro
Walkind Dead LE
All are without hardware easily obtainable from hardware store. All are like new and have been tested and are 100% functional. 145.00 each. Thanks and see you at the show....
Quoted from poppapin:Almost a month away fellas!
It sure is can't wait Count down
Looking for the following Bally/WMS parts:
Getaway: HSII translite, in good condition.
Funhouse shaft assembly diverter (A-14163)
Great Lakes Modular OSB-10B Custom 10 Opto Switch Board for Twilight Zone, with the 3rd magnet connection.
If can help me acquire any of these parts, I’ll be at Pinfest both days, just PM me with your price.
Quoted from LoudBeardyHatGuy:Are there enough junk parts vendors
Indoor flea market, right rear spaces.
Quoted from Pinball_Basement:Out of all the conventions i've been to, I like this one the most.
I'm lucky to live less then 2 hours from it. I hope you get there after all!
I need a 1967-1971 Gottlieb PF glass lock down bar. HELP! Picked up a nice game missing it. Will pick up at the show or will pay to ship now.
Quoted from poppapin:Will there be playfield glass for sale?
Ivan has a booth where he sells regular glass. Coin taker has voodoo glass
Quoted from Butch2099:Ivan has a booth where he sells regular glass. Coin taker has voodoo glass
I would check with Ivan about glass before the show. I think, but not sure, last year he only brought glass if prepaid.
Quoted from Lovef2k:I would check with Ivan about glass before the show. I think, but not sure, last year he only brought glass if prepaid.
I think prepaid was only for custom sizes. I think regularly glass he had a bunch of. I'm sure he'll chime in at some point
Quoted from Gotemwill:Thinking about bringing a game for the first time this year. I see on the website that Thursday is a setup day. Are all the free play games brought in on this day? Is it possible to setup a game on Friday morning before the show officially opens at 12pm?
Following up on this question since I don’t believe I saw a response.
Is it possible to bring a free play game for Friday only? If so, how early on Friday can you get into the building to set it up? Does the early withdraw fee apply if you pull it out that night?
Quoted from Gotemwill:Following up on this question since I don’t believe I saw a response.
Is it possible to bring a free play game for Friday only? If so, how early on Friday can you get into the building to set it up? Does the early withdraw fee apply if you pull it out that night?
You can get into the hall 2 hours before opening usually to set up a freeplay game. You can remove the free play game if you want it there for Friday only after whatever the cutoff time is for that day (usually 2 hours before show close).
The times have changed year to year but this has been the way it's been for a long time as not everyone can get up there Thursday, and not everyone wants to keep their games there for both days. For instance, if you bring a free play game for sale and it sells on Friday, the buyer can remove it that day with no fee. You won't be able to get in the next day for free but that makes sense since your game isn't there anymore.
I'm likely going to sell my Jurassic Park Tilt Topper at Allentown if anybody is interested. No idea what it's worth yet, but just throwing it out there to test the waters. I'll be at the show Friday early afternoon. I'm usually bored by 3. 
If anyone is thinking about getting a playfield protector for a game, they are offering free shipping to Pinfest. See post below.
Looking for a set of round wooden side rails. I have a set of the flat top ones but want the round as that is what the game came with.
Quoted from poppapin:Will there be playfield glass for sale?
I will have standard glass at the show and doesn’t need to be prepaid. I’m not get much request for custom sizes and not sure if I can get an order in on time. I’ll be checking on that this week. For Standard glass, I currently have about a 100 sheets. I may try to get more.
If there is a need for something specific or if you’d like to reserve some, now is the time to let me know.
Ivan
Pinfest 2022
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
