Quoted from Williampinball:2019 it was open at 12pm
With an extremely long and horrendously slow moving line to get in. I hope it's not like that this year. Otherwise just tailgate till 1pm or so and then cruise right in (if you didn't already get early access for bringing a game.)
Still looking for a NOS Charlie’s Angels SS p/f, or NOS Roller Disco p/f
Machine - For Sale
Hi-Flyer Working Project - Can Bring to Allentown
Used - shows wear, needs some work “Hi-Flyer Project. Playfield ok, cab not great, backglass rough although it has been sprayed/cleared from the backside to preserve what's there. Everything seems to work with except...”
21 days ago
Winchester, NH
GraniteStatePin
410
Quoted from sevenrites:With an extremely long and horrendously slow moving line to get in. I hope it's not like that this year. Otherwise just tailgate till 1pm or so and then cruise right in (if you didn't already get early access for bringing a game.)
Last year the line moved very fast,I was surprised at how fast I got inside!
Bringing for free play and sale - Thurs/Fri/Sat:
Super nice GTB King Pin - lovely cabinet, legs, and playfield. Nice coin door too. Shay BG
Jungle Queen - Nice playfield, solid cab - a few scratches/dings, nice coin door, nice BG
Both games play super sweet too.
Looking forward to another awesome show.
Here's a preview of some items I'll have in my vendor booth.
An original film producer's leather jacket from 1995's Judge Dredd
T-shirts for the upcoming Saratoga Pinball & Arcade Show
Parts:
Classic bally coin door (pry marks in one corner, unfortunately)
A stack of boxes chest high filled with wiring harnesses--game plan, classic bally, classic williams, early DE, gottlieb system 3. Good for repairs or building your own test fixtures!
A few early SS cab speakers.
System 3-6 boards: master displays, type 1 & 2 sound boards
System 3-6 test fixture
Game plan cabinet and playfield parts
Game plan sound boards
Game plan sharpshooter playfield (very nice, partially populated)
Interflip Dragon playfield surface
Classic Bally 122-125 transformer
Williams system 3 transformer
Williams laser ball drop target cages
Classic bally 4-drop target cage with drop targets
Classic bally set of chimes (4 bars, 2 units).
Very nice Atari pinball manuals
Sharpshooter II manual
Quoted from ForceFlow:Here's a preview of some items I'll have in my vendor booth.
An original film producer's leather jacket from 1995's Judge Dredd
T-shirts for the upcoming Saratoga Pinball & Arcade Show
Parts:
Classic bally coin door (pry marks in one corner, unfortunately)
A stack of boxes chest high filled with wiring harnesses--game plan, classic bally, classic williams, early DE, gottlieb system 3. Good for repairs or building your own test fixtures!
A few early SS cab speakers.
System 3-6 boards: master displays, type 1 & 2 sound boards
System 3-6 test fixture
Game plan cabinet and playfield parts
Game plan sound boards
Game plan sharpshooter playfield (very nice, partially populated)
Interflip Dragon playfield surface
Classic Bally 122-125 transformer
Williams system 3 transformer
Williams laser ball drop target cages
Classic bally 4-drop target cage with drop targets
Classic bally set of chimes (4 bars, 2 units).
Very nice Atari pinball manuals
Sharpshooter II manual
I'll have to touch base with you about a Bally playfield harness or two.
Any chance you have a Bally 3 drop target bank?
PinballSTAR will have our usual huge booth at the show...
Spooky is coming down this year from WI again with 4 games ! Halloween and Ultraman... They will be in our booth space.
We will have also have in our booth :
American Pinball's Legends of Valhalla (show game for pre-sale before show)
Chicago Gaming's Cactus Canyon Remake
Jersey Jack Pinball's Guns and Roses (open to play and NIB - all available for pre-sale before show)
Anyone interested in any show game purchase discounts please email Joe at [email protected]. First come first served - we will presell these before teh show. There will be no show game sales of CCR as they are going to be CG's games that will be returned to them, but of course we will be taking orders for CCR SEs and CCR SE+s.
Email for info !
Quoted from Dono:Bringing for free play and sale - Thurs/Fri/Sat:
Super nice GTB King Pin - lovely cabinet, legs, and playfield. Nice coin door too. Shay BG
Jungle Queen - Nice playfield, solid cab - a few scratches/dings, nice coin door, nice BG
Both games play super sweet too.
Looking forward to another awesome show.
Dono always has the best stuff!
Some stuffs I'm bringing.
Bud sign, $25
New Flash Gordon PP stencils $160
New Lethal Weapon 3 upper mirror $25
Moon Cresta monitor surround $10
Free stuff- lightbulb for Bally Centaur II or Mr & Mrs Pacman, 2 bags of various bulbs (44,47,89, 555) Bally head release levers (pacman), SF Rush and Gauntlet Atari ROMS, Data East badge.
Tie Fighter, xenon bulbs and one bag of bulbs spoken for.
Looking for a Bally standard lower cabinet metal brace that goes over rectifier board, Bally 3 drop target bank, Bally or Stern playfield wiring harness (78 to 86)
I'll be there Friday and Saturday.
20220424_161721 (resized).jpg20220424_164307 (resized).jpg20220501_171803 (resized).jpg20220504_064153 (resized).jpg20220504_064157 (resized).jpg20220504_064201 (resized).jpg20220504_064215 (resized).jpg
Palantir eye of Sauron mod for LOTR standard. Made by WillPinball mods. $150
Iron Maiden Pro plastic set. $125 -SOLD
Still on the lookout for:
Williams "Pit Stop" backglass
Bally "Beauty" backglass
Parts for an "Alley Cats" bowler- metal covers for fluorescent lights near pins, smaller Plexi scoring backglass thingee, beer bottle pins... possibly more.
Antique slot machine stands
Altered Beast pcb
Also still on the lookout for the missing award glass for the slot I grabbed in the flea market last year... Longshot, but worth a try
20220504_083703.jpgLooking for…
Parts:
- Class of 1812 translite, plastics, PF, toys
- BSD side art blades
Games:
- TX Sector
- Radical
- Spirit
- Haunted House
Also, not limited to the titles above, I have a nice and upgraded BSD that plays great up for trade +\- cash. Owned it for about 4 years now and just looking to change it up. Gameplay video below.
- LED's throughout, titan rubbers, pf is nice, cab is nice, unfaded, and red letters, colorDMD, pinsound, CPR mirrored glass, perfect plastics with proto slings, 3D coffin mod, all speakers upgraded, NVRAM, nice legs and new casters, love never dies light mod, etc.
I live 45 min south of Allentown.
Quoted from poppapin:EM schematics I can bring $10 each
King of Diamonds
Quick Draw
Soccer
Lawman <SOLD
Bon Voyage
Bon Voyage manual
Also partial plastics for:
Domino
King Pin/Pin up
Atlantis
Quick Draw/Fast Draw
Schematics that are still available
Quoted from Pinphila:Man Bob, when are you opening the store front!
Bob is a great seller! Deal with confidence. All his games are top notch and priced fairly.
Thanks John! I appreciate it!
No storefront in my future plans. I just retired from one job, I don't want to ever punch a clock again.
Edit: Backglass Trades:
Due to overwhelming demand, I have to stop further backglass trades for this trip as I am meeting over 20 people now and still want to see the show. If you already have my contact info and reached out we are still on. I'm glad so many folks are going to be able to trade up and/or have new backglasses for their machine.
Thanks!
SOLD PENDING PU $35. 2ea. PINBALL PRO Williams /Bally 5 1/4" Backbox speakers, hooked up and never used.
$45. Fire! Center builds, NOS perfect.
SOLD $50. 4 bally EM score reels, 2 pop bumper assembly's and both left and right flippers assembly's out of working Old
Chicago.
jeff green booth
IMG-5126 (resized).jpgIMG-5127 (resized).jpgIMG-5128 (resized).jpgIMG-5138 (resized).jpgIMG-5139 (resized).jpgIMG-5140 (resized).jpgIMG-5141 (resized).jpgIMG-5142 (resized).jpg
Looking for parts for 1972 Midway TABLE TENNIS (wall game):
- Control motor (40-2147) - the double motor for score reels
- 2 Relays (M-33-1700 DC)
- Motor speed control PCB (PC560-909-2)
Really need this saucer kicker for my EBD. I'm bringing the machine to sell, but without that kicker, it doesn't work. There are two different versions. See pics below. I need the one shown on the bottom of the playfield, not the loose one with no coil. Save my ass! 
20220502_152022 (resized).jpg20220502_152100 (resized).jpgQuoted from Alan_L:Really need this saucer kicker for my EBD. I'm bringing the machine to sell, but without that kicker, it doesn't work. There are two different versions. See pics below. I need the one shown on the bottom of the playfield, not the loose one with no coil. Save my ass!
[quoted image][quoted image]
Ok, I'm 99% pretty sure I have one. I'll double check tonight when I get home.
Quoted from wolftownjeff:SOLD PENDING PU $35. 2ea. PINBALL PRO Williams /Bally 5 1/4" Backbox speakers, hooked up and never used.
$45. Fire! Center builds, NOS perfect.
$50. 4 bally EM score reels, 2 pop bumper assembly's and both left and right flippers assembly's out of working Old
Chicago.
jeff green booth
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
PM sent on the Bally hardware.
Quick story for all of you guys who think I talk too much. My shitty luck continued again last night and now I am even further behind. I had a few sheets of new wide body glass I knew I was never going to use plus 8 or 10 sheet of used playfield glass. At the last minute I decided I would go ahead and move them from the basement up to my van.
I loaded 6 on my handtruck (with padding under them & behind them) and took about 6 at a time up to load them into the van. The first trip went fine but after the first two sheets loaded from the second load I grabbed two more sheets off the handtruck and while I was holding them they just exploded. I didn't bump anything I was not even near anything and all of a sudden I am holding a few glass crumbs & there is a pile of glass on the ground.
Of course this could not have happened over the driveway it happened 1/2 way between the grass in the yard & the driveway. Three hours later I finally had most of it cleaned up. Today I have to go out and clean up a little more.
So my load just got lighter by two pieces of glass and with time short some of the other stuff I planned to bring along likely will not make it. Sometimes you wonder "what else can slow me down?"
At least I didn't bleed much and both eyes still work!
And for you guys that always want pictures sadly both my camera and phone were in the basement but I did think about the people who will ask "do you have pictures of that".
Quoted from too-many-pins:Quick story for all of you guys who think I talk too much. My shitty luck continued again last night and now I am even further behind. I had a few sheets of new wide body glass I knew I was never going to use plus 8 or 10 sheet of used playfield glass. At the last minute I decided I would go ahead and move them from the basement up to my van.
I loaded 6 on my handtruck (with padding under them & behind them) and took about 6 at a time up to load them into the van. The first trip went fine but after the first two sheets loaded from the second load I grabbed two more sheets off the handtruck and while I was holding them they just exploded. I didn't bump anything I was not even near anything and all of a sudden I am holding a few glass crumbs & there is a pile of glass on the ground.
Of course this could not have happened over the driveway it happened 1/2 way between the grass in the yard & the driveway. Three hours later I finally had most of it cleaned up. Today I have to go out and clean up a little more.
So my load just got lighter by two pieces of glass and with time short some of the other stuff I planned to bring along likely will not make it. Sometimes you wonder "what else can slow me down?"
At least I didn't bleed much and both eyes still work!
And for you guys that always want pictures sadly both my camera and phone were in the basement but I did think about the people who will ask "do you have pictures of that".
I feel your pain, (i like reading your posts by the way) I took a piece off of my truck stop , sat it on carpet and about 1/2 hour later it went boom! Diamonds everywhere! That was four or five years ago and I still find pieces here and there.
I have 3 brand new RGB LED fast color changing shooter rods. They are for Williams WPC machines such as Twilight Zone. They'll only work on Stern SAM machines such as Lord of the Rings IF you replace the shooter plate since the rod is thicker than Stern's. $65 each. I'll be at the show Thur-Sat close.
IMG_20220503_222316427 (resized).jpgIMG_20220503_234449799 (resized).jpg
Had this sold and the buyer just messaged me to back out. Can bring with deposit.
Check out this boomy fuckin' preliminary game list for the Pinfest tournament!!!
Also, we are working on a way to make the Kids' tournament more palatable. Shorter entry, with earlier finals so people coming on Friday can make this work (so they don't have to come back saturday morning). If you have little ones who want to play (Ages 6-13) come on by the tournament area and check it out!
Algar
Whirlwind
Space Station
Shadow
Count-Down
Star Trek Pro
Walking Dead Pro
guardians pro
GOT pro
Galaxy
Aztec
Royal Rumble
Jungle Princess
Frankenstein
300
Harlem
Tron Pro
Dragonfist
Star Wars pro
Volley-
Avengers pro
BK pro
Zep Pro
Blackout
Viking
Board Retirement Home Cleanout
All sold as is untested (or I'll tell you what I remember about them).
DE Big DMD PSU. Has some weird trimpot hack. Needs caps. (removed them as desoldering gun practice). $30
DE Regular DMD PSU. Pretty hacked up traces wise. Recapped. Replaced it at one point with another one so it must have SOME quirks to it. $30
DE PPB Board. Lots of lifted traces. Q2 and Q3 blow somewhat intermittently. Got tired of replacing them/securing them so replaced it. "works" in theory for some time. $20
Gottlieb Sys3 CPU. Replaced battery and Dallas DS1210 chip. Gave me a U3 error I think. $150
Gottlieb System80 CPU. Has data line 6532 related error. Does not boot. Very clean if you know what you're doing with Sys80 boards. $60
Gottlieb Sys80 Driver Board. I'm nearly certain this one works entirely. Pulled from a Black Hole and just replaced the driver board for the hell of it. $80
(will sell the Sys80 boardset together for $120)
Pascal PI-FX1 - Missing D4 which is some Zener diode. Pulled it because I thought I had a replacement but I guess I didn't. $40
Make me an offer on any.
IMG_5790 (resized).JPGIMG_5791 (resized).JPGIMG_5792 (resized).JPGIMG_5793 (resized).JPGIMG_5795 (resized).JPGIMG_5796 (resized).JPGIMG_5797 (resized).JPGIMG_5798 (resized).JPGIMG_5799 (resized).JPGIMG_5800 (resized).JPGIMG_5801 (resized).JPGIMG_5802 (resized).JPGIMG_5803 (resized).JPGQuoted from CrazyLevi:Check out this boomy fuckin' preliminary game list for the Pinfest tournament!!!
Also, we are working on a way to make the Kids' tournament more palatable. Shorter entry, with earlier finals so people coming on Friday can make this work (so they don't have to come back saturday morning). If you have little ones who want to play (Ages 6-13) come on by the tournament area and check it out!
Algar
Whirlwind
Space Station
Shadow
Count-Down
Star Trek Pro
Walking Dead Pro
guardians pro
GOT pro
Galaxy
Aztec
Royal Rumble
Jungle Princess
Frankenstein
300
Harlem
Tron Pro
Dragonfist
Star Wars pro
Volley-
Avengers pro
BK pro
Zep Pro
Blackout
Viking
My son is 5 and wants to play. Is that okay?
Quoted from JakePG:My son is 5 and wants to play. Is that okay?
You mean he is 6......Shhhhhhhhhhhhhh.......
FIRE SALE
All items below 20 bucks
Pm me hand deliver on Friday!!
Pac man lunchbox sold
Coke clock sold
Coke boy sign sold
Joker poker manual sold
01E1A1CB-87A3-4E79-8164-368C8D87B608 (resized).png15934738-F0FB-4029-97EC-3C214F472DCF (resized).png2C5FF99A-4D69-4DEC-A015-B99F2BF90A09 (resized).png303BF27F-E77F-46A1-A497-157E368344D4 (resized).png5DC230DD-7B71-4BF2-84DE-9F3AC38AEC75 (resized).png6B4004D5-B566-4629-8EBF-3B7E007052BC (resized).png780DFDBE-970D-48E3-B51D-6FF2DEC8C301 (resized).png864EAAF0-7DBF-4AE9-9AE8-58AFDD88EDF4 (resized).pngA113320E-1AAA-4F8E-859C-D75BBA927548 (resized).pngAAA67295-0786-4C9F-9CF4-90ECAB743025 (resized).pngF23AE1DB-F1DA-4AC0-B1FF-EA575B7F1E5E (resized).pngFAC4BB49-50A2-4F08-996D-DFD3A4A46287 (resized).pngFDCE4B48-1D80-46BE-BC74-B43ABD19236E (resized).png
Quoted from JakePG:My son is 5 and wants to play. Is that okay?
He will have to pass a carefully curated test of his wits and reflexes!!!
(I would think he'll be ok!)
Quoted from rollinover:FIRE SALE
All items below 20 bucks
Pm me hand deliver on Friday!!
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
PM sent on Coke clock
Quoted from pinhead52:Dono always has the best stuff!
2nd that, as a solid.
I'm happy to have a Jet Spin that he did a few years ago.
Superb work, inside and out!
Edit: this is now all sold.
Last call before I load up.
TAF original speaker panel (plastic only) $25 OBO (SOLD)
One set of WPC original back box speakers. All working and in good shape. One from TOTAN (SOLD), another uncertain and another single speaker only (SOLD). $25 OBO for each pair.
Bally cocktail transformers, wiring and hardware. $25 OBO
Funhouse and Roadshow new and used motor and various shafts, eyelets and parts. $40 OBO
CFTBL NEW Mantis hole protectors and used scoops. $25 OBO
Arcade Marquees for wall art $10 OBO each:
Pac-Man
NBA Jam
Bump & Jump
CPR Fire! NEW Topper set with plastic covering not removed. $25 obo
System 11 legs $35 obo
Pics:
https://pinside.com/pinball/forum/topic/pinfest-2022-buy-sell-trade-want-no-hotel-talk/page/25#post-6904682
https://pinside.com/pinball/forum/topic/pinfest-2022-buy-sell-trade-want-no-hotel-talk/page/29#post-6909404
Will be there tomorrow through Saturday.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinfest-2022-buy-sell-trade-want-no-hotel-talk/page/34?hl=grantopia and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Cumming, GA
Cedar Valley, ON
