(Topic ID: 297596)
Marlborough, MA
Looking for an underpriced game with lots of mods and a colordmd that I can immediately flip at the show to pay for my entry fee and purchases.
Look at post 1075 for pics,any more interested let me know
I’m looking for a Gottlieb Stargate ra-mirror for the backbox and have the below up for sale or trade.
A Williams system 7 display driver board (edge connectors) along with 4 7 digit and 1 credit display for sale. 2 of the displays are working (have some burn in). I changed the ribbons and all four players will work coming from the board, it’s just the 2 displays themselves not working. I didn’t check the credit one, the board looks to be in good shape. $100 OBO
Transformer board out of a Sinbad. The small transformer is fried and desoldered. Everything else is there and was working when it was pulled. I have all of the wires labeled going to the small transformer. $65 OBO
I have a set of original High Speed plastics. There are a few that are broke, see pics. I’ll also include 2 new CPR slings and a chopper. $65 OBO
Original High Speed ramp. $55 OBO
Complete original Nitro Ground Shaker plastics with pop caps. The one plastic over the saucer is broke and taped. $55 OBO
MIDWAY 8080 POWER SUPPLY KIT $35 OBO
I also can burn some eproms. $6 each just PM me in advance to make sure I have the chip and tine to burn.
I will be there Friday only.
Quoted from yzfguy:Looking for an underpriced game with lots of mods and a colordmd that I can immediately flip at the show to pay for my entry fee and purchases.
I like your style
Quoted from Troyster42:Complete original Nitro Ground Shaker plastics with pop caps. The one plastic over the saucer is broke and taped. $55 OBO
I should grab them for wall art.
NBA FB link kit. $300. Be there Friday definitely. Saturday probably.
I bought this as NOS 10 years ago. Recently got rid of the games.
The toppers have some creases. The backs show where I had velcro (that pulled off) to attach them to a beam in the ceiling. The adhesive still has the coverings.
I took the staple out of the instruction manual when I uploaded it to ipdb.
Has the chips needed for the A/V boards, the link cable, and some other chips.
You really just need the latest code in your game.
This came in a plain thin cardboard box which I believe is gone. Will try to figure out something to put it in.
I realize you can make this kit on your own by searching around. This is not homemade.
20220420_175659 (resized).jpg20220420_175703 (resized).jpg20220420_175922 (resized).jpg20220420_180121 (resized).jpg20220420_180139 (resized).jpg20220420_180159 (resized).jpg20220420_180210 (resized).jpg20220503_190545 (resized).jpgStill available, $5.00 for any bag!
Quoted from daly124:I have a bunch of used but clean bulbs, $5.00 a bag. All the bulbs are cleaned in an ultrasonic cleaner, tips cleaned on a wire wheel on the bayonet-style bulbs. All bad bulbs thrown away. I have the following available.
-5 bags of #44 bulbs, 250 per bag
-3 bags of #44 or #47 bulbs(can't read what they are), 250 per bag
-3 bags of #555 bulbs, 250 per bag
-3 bags of #89 bulbs, 25 per bag
-1 bag of #67 bulbs, 25 per bag
-1 bag of #906/#912 bulbs, 25 per bag
[quoted image]
94bc99846ab7a948e892128774ae05a007265cef (resized).jpg
I will be at the show sat 9 to 2
Let me know what pic are interested in the numbers didnt match up..
Pm me.
1. 150
2. Make an offer
3. 100
4. 40
5. 100 each 2 for 150
6. 100
7. Nos door 100
8. 50
9. 150
10. 150
11. 100
20220503_190307 (resized).jpg20220503_190321 (resized).jpg20220503_190331 (resized).jpg20220503_190339 (resized).jpg20220503_190851 (resized).jpg20220503_191420 (resized).jpg20220503_191655 (resized).jpg20220503_191733 (resized).jpg
$2300 Big Guns. Just shopped, plays fast and fun, overall good players quality game. Lower segment out on P3 display but you never notice it playing a 1 or 2 player game. Couple of cracked/chipped plastics. Some paint loss on pf where you load the cannons at left and right. Everything else is factory mylar. Cab has some scraps/paint loss. All original good condition matching boards. No acid damage and has remote battery. Full disclosure I've had a few times where I turned it on and the sound didn't work, no sound board "bong", turned off and back on and works fine. Never looked into it. More pics at request, sorry my phone camera kind of sucks.
0 (resized).jpg1 (resized).jpgMight be a long shot - but, I just set up a Gold Wings I had in the back corner of my shop tonight. Was able to get it fully working again with the signature Gottlieb-connector reseat dance, but, also unfortunately realized it was missing the siren/transformer board in the bottom of the cabinet! Any chance someone has one they would sell?
7BCD6752-8966-41BF-ADCD-7F9206C8BDD1 (resized).jpegBob Phillips and I will be bringing the following games for booths 89 and 90.
For Thursday set up…
Rob Zombie
TZ
Restored Medusa
Bone busters
Gott. Atlantis
Tommy
Star Wars pro
Met Pro
Star Battle cocktail
Gott. Spiderman
Xenon project
Bally Eight ball project
Jungle Queen
Baker novelty baseball
We plan to bring these on Fri if a deposit is received .
Gotg pro
Stern Indy
Demo man
If we have space, I can bring the following on Saturday:
Cleopatra project
Charlie Angels project
*Woz, Popeye, and Marble queen are pending pick up
Safe travels
Quoted from Clytor:Any chance this will be set up to play? I've never seen one in person.
Probably not bringing it until Saturday morning. Will be set up for the buyer to inspect.
This is my first time to Allentown pinfest. I can bring a Gottlieb Close Encounters of the Third Kind and some other things that I will post later. Ideally I like to trade it for another system one machine! I already have another Close Encounter, Countdown, and Joker poker. I am picking up two project machines at the show, Charlies angel's and Sinbad. Open to other solid state pin trades.
About the machine, it is fully working. The power supply is brand new, ground mods done, fuses are added to protect the small transformer, almost all of the connectors in back box are repined, battery holder with lithium ion batteries, new coin door sticker, ball, cord end, locks and rubbers.
IMG_2853 (resized).jpgIMG_2854 (resized).jpgIMG_2855 (resized).jpgIMG_2856 (resized).jpgIMG_2857 (resized).jpgIMG_2858 (resized).jpgIMG_2859 (resized).jpgIMG_2860 (resized).jpgIMG_2861 (resized).jpgIMG_3059 (resized).jpgIMG_3060 (resized).jpg
London, ON
I'm bringing these unusual beauties to the freeplay area. It's been a long slog bringing the one on the right up to spec for the show. Glad I had the one on the left as a reference point to repair all of the toddler-style rewiring that someone had done in the past. Yes, even the sound boards needed work and they're rawwring and beep-booping just as they should now! And, yes, the playfields and backglasses look like brand new. Baoooooo!
IMG_20220503_204648 (resized).jpgIMG_20220503_204654 (resized).jpgIMG_20220503_204709 (resized).jpg
Better late than never. I have a nice original Silverball Mania. Pretty clean. Plays as it should. All displays are clear and brite. Backglass has some flaking at the bottom but not real noticeable while playing. New Altek MPU and the nicest original playfield I’ve ever seen. Probably day 1 Mylar. Cab is nice shape. Paint is pretty clean and bright. I can get more pics. Overall a very nice presentable pin. I can bring to show on Friday with payment or a deposit.
Would like $2200 OBO.
16BFE758-7CFB-44E7-87D9-DC853A3BBEA1 (resized).png6E82CC6A-5879-4511-866D-5A661E559377 (resized).jpeg
D47E5D5E-16C8-4DE2-8EC0-B6C717120C3B (resized).jpegD833ED5F-54DF-4EDE-B1B7-22615D348B56 (resized).jpeg6E0FC5AE-B2AA-472D-AB67-1A3F33F78793 (resized).jpeg
Quoted from Woolwich01:I can also bring this candy machine if anyone is interested. I picked up at an auction 20 years ago and I don't know if I have the keys. $50 obo
How about that SS 2? 
This MPU and driver board are from a Williams Firepower. The good is I replaced the forty pin connector, the ceramic resistors in the GI sections, some bad transistors, cleaned it up and had it fully working in the game. The bad is I reversed a connector when putting it back into the game and it stopped working. 
I gave up and bought a new set of boards. If anyone can use this, make me an offer.
IMG_3064 (resized).jpgIMG_3065 (resized).jpgIMG_3066 (resized).jpgQuoted from Butch2099:Only 2 days until set up!! Just back from AZ Zapcon (Which was lots of fun) Now ready for Allentown!
Here's my list of games and parts (with prices) that I'm bringing for my double booth behind Cointaker & Ramp O' Matic. Look for my new Butch's Game Garage banner!
I won't blow up this thread even more with pictures, this list is long enough! I have pictures of most of these games, but prefer an in-person sale and to start the show strong with nice stuff.
Terminator 2 - Shopped with new clear rubber, Non-Ghosting LED's, new Mirror Blades, new slingshot plastics, Pinball Pro sound system, new legs & bolts. Cabinet presents well but has been repaired over the years, playfield is really nice in my opinion. $4,650
Terminator 3- Non-Ghosting LED's, some new rubber, Flipper Fidelity sound system W/Amp. Cabinet & playfield really nice. $4850
Guns N Roses Limited Edition- Low plays, JJP topper and Concert poster side blades. Cabinet & Playfield are perfect (no pooling). $10,500
The Simpsons Pinball Party- All original. I bought as un-documented HUO, condition reflects that. Shooter & Itchy/Scratchy area perfect. Some minor cabinet blemishes that makes it not perfect, but hard to notice in the busy artwork. $9,000 OBO
AC/DC Premium- Looks previously routed, but I would bet single location based on cabinet. Shopped, cleaned and waxed. Armor re-done last week. Minor playfield wear (mostly lower). $9,000
Mandolorian Pro 1- Low plays HUO, Illusion Orange powder coating, Voodoo Glass & Shaker motor. $8,100
Mandolorian Pro 2- Low plays HUO, Silver Speckle powder coating, Voodoo Glass & Shaker motor. $8,100
Pictures of both in the powder coating thread later today.
Star Trek Pro - Out of my personal collection, so if it doesn't sell I'm fine keeping it. I bought it earlier this year as low play HUO, Condition reflects that. Mods include Color DMD, Topper, Mirror Blades, Shaker Motor, Pinball Pro sound system, Plastic protectors, asteroids, Cliffy shooter protector and transporter domes. $7,500
Flintstones- Sold
Big Indian- Sold
Halloween CE - NIB Looking for trades, will have on hand at the show.
Star Wars Premium - Sold
Saturday before the show opens I'm making a trade for Rush Pro and Avengers Pro. I'm told both are low play HUO, but I won't see them until the show. Aiming to price those around $6,400 if all is good.
Also may be getting a Godzilla Pro Saturday.
Star Light - Rare, only 100 Made. Sale pending (Saturday)
Parts table:
Color LCD DMD's - I'll have some for $500 Supply is limited and Randy is sold out (possibly until next year). I paid full retail for them + Shipping. So, slight markup but I'm OK keeping them on hand for games I shop.
Mando Pro Wireform ramps $175 (typically sell for $210)
Hot Wheels decal set (Missing R head) $150
JP Pro R side cab decal $50
Iron Maiden R side cab decal $50
Jurassic Park amber light up shooter rod (not Stern) $125
Gottlieb Hulk & Spider Man aprons $10 each
Twilight Zone clock boards lot of 6, some working, some not, $125 for all.
Lollipop rails - I have 4 sets total, 2 brand new from Pinball Life, 1 purple powder coated, 1 Black powder coated. $75 a set.
Elvira/Munsters? Stern side rail set, they sold $300 from stern, 1 is slightly bent, may be fixable if powder coated. $125
Music side rail set (think Guitar Ax) red powder coated but probably needs to be redone. I think it came off a KISS. $125
New Pinball Life Spike 2 shaker Motors $125 each
Bill acceptor power adapter cords $20 each (Sells for $41 plus shipping on Game room guys site )
Red Shooter rod $20
Packs of Felt Leg Protectors $2 each set of 4
Looking forward to seeing everyone at the show!
I forgot to add that we will have the ability to take credit cards this year
I do have to add 3% credit card fees and 6% PA sales tax on all card sales.
Quoted from Chisel:How about that SS 2?
Sorry I am just waiting on a new MPU from another member and it will be joining my other machines in the game room! 
Last couple of things that I am bringing. I picked these up at an arcade auction 20 years ago for some reason!? One box is label Tiger Road and the other Circus Charlies. Anyone interested in the parts and boards, make me an offer. I will be there Friday.
IMG_3067 (resized).jpgIMG_3068 (resized).jpgIMG_3069 (resized).jpgIMG_3070 (resized).jpgIMG_3071 (resized).jpgOriginal Williams System 7-9 display set - player 1, 2, & the credit display are fully working. Player 3 & 4 are not, but I have not looked into why, and they are currently in an un-shopped Space Shuttle. Assume player 3 & 4 are bad. Ribbons are not included.
$100 for the set, meet up on Friday only.
24F9FBAB-CDDB-49B8-9C78-9F6920A52A1D (resized).jpeg3BE378BE-C5DA-4CAB-A65B-8FB8568EA2D7 (resized).jpeg78279222-E0E3-46F6-BA7D-942044E4588A (resized).jpegQuoted from PSUTownie:Original Williams 4/7 Display Board (D-11610) - player 1,2, & 3 all have what looks-to-be newer display glass installed, and are bright, fully working, and very clear. Player 4 is out, and appears to be an original. PCB is clean and the old work nice. Out of a Big Guns, but will fit many Williams and Data East titles.
$100 - Pickup on Friday only.
[quoted image][quoted image]
This display (Williams System-11 4/7) is now sold.
The 7-9 display set in the previous post is still available.
Quoted from Woolwich01:Sorry I am just waiting on a new MPU from another member and it will be joining my other machines in the game room!
Yeah I was just messing with you! I have sharp shooter and sharp shooter 2 already! I’m a big fan.
I will be bringing the following games for sale or trade.
Guns n Roses Data East very nice color dmd
Demo man clear coated playfield, painted lollipop metal
Earthshaker very nice
Party Animal
They will be in booth 93
Setting up Friday
Quoted from Butch2099:Probably not bringing it until Saturday morning. Will be set up for the buyer to inspect.
Man Bob, when are you opening the store front!
Bob is a great seller! Deal with confidence. All his games are top notch and priced fairly.
Edit: sold!
Buy this and me bring this to allentown... gotta load up tomorrow!
Metallica Pro - decked out and pimped - Signed by Borg, Dirty Donny, and Lyman
Flipper Fidelity, Shaker, ColorDMD, UV lightning rails, Creeping Death Side and backbox art, Cointaker LEDs and flashers, Service Rails, Titans, Lit flipper buttons, coffin mod, snake mods and decals, and more... $7800
Cab and PF are PRISTINE
i-kp9d9Rb-X4 (resized).jpgi-chfbRnR-X5 (resized).jpgi-sqfLJH7-X5 (resized).jpg
https://flynnibus.smugmug.com/Pinball/Metallica-FS/n-GxctCz/i-chfbRnR/A
Quoted from cooke:I'm bringing these unusual beauties to the freeplay area. It's been a long slog bringing the one on the right up to spec for the show. Glad I had the one on the left as a reference point to repair all of the toddler-style rewiring that someone had done in the past. Yes, even the sound boards needed work and they're rawwring and beep-booping just as they should now! And, yes, the playfields and backglasses look like brand new. Baoooooo!
[quoted image][quoted image][quoted image]
Those are bad-ass, can't wait to get my arse kicked on them.
Quoted from PSUTownie:Original Williams System 7-9 display set - player 1, 2, & the credit display are fully working. Player 3 & 4 are not, but I have not looked into why, and they are currently in an un-shopped Space Shuttle. Assume player 3 & 4 are bad. Ribbons are not included.
$100 for the set, meet up on Friday only.
[quoted image][quoted image][quoted image]
The Williams System 7-9 display set is also now sold.
Does anyone have a working Atari Gen 2 pinball MPU board?
Might be interested in non-working clean one too, but preferable working.
What time does this start on Friday? First time attending. The website lists 12 PM is that correct? Is the farmers mart close by? I heard a few of you guys say the stuffed pretzels are a must!
Quoted from Woolwich01:What time does this start on Friday? First time attending. The website lists 12 PM is that correct? Is the farmers mart close by? I heard a few of you guys say the stuffed pretzels are a must!
Farmers market is directly next door, it is a must
Quoted from eabundy:Farmers market is directly next door, it is a must
Yes for sure great there
Quoted from flynnibus:Buy this and me bring this to allentown... gotta load up tomorrow!
Metallica Pro - decked out and pimped - Signed by Borg, Dirty Donny, and Lyman
Flipper Fidelity, Shaker, ColorDMD, UV lightning rails, Creeping Death Side and backbox art, Cointaker LEDs and flashers, Service Rails, Titans, Lit flipper buttons, coffin mod, snake mods and decals, and more... $7800
Cab and PF are PRISTINE
[quoted image][quoted image][quoted image]
https://flynnibus.smugmug.com/Pinball/Metallica-FS/n-GxctCz/i-chfbRnR/A
I want the Metallica
Quoted from Woolwich01:What time does this start on Friday? First time attending. The website lists 12 PM is that correct? Is the farmers mart close by? I heard a few of you guys say the stuffed pretzels are a must!
2019 it was open at 12pm
Looking to buy a cliffy for the scoop on my Austin Powers if anyone has one for sale. I'll be at the show Thursday and Friday hanging around Rich's and Bob's booths 89 and 90.
Also, I'm bringing the dmd I pulled out of my AP when I replaced it with a color LCD, a Flintstones translite and a set of Taxi playfield decals (Marilyn). Message me if interested.
Thanks!
Quoted from cooke:I'm bringing these unusual beauties to the freeplay area. It's been a long slog bringing the one on the right up to spec for the show. Glad I had the one on the left as a reference point to repair all of the toddler-style rewiring that someone had done in the past. Yes, even the sound boards needed work and they're rawwring and beep-booping just as they should now! And, yes, the playfields and backglasses look like brand new. Baoooooo!
[quoted image][quoted image][quoted image]
Nice! Double Dragon! 
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
