Morgantown, PA
Quoted from BZarrCaptain:Hello, if anyone has any Funhouse ramps I'd really appreciate a heads up.
I have a used set
(Topic ID: 297596)
Police force incomplete plastic set used - 50
Bally apron/shooter lane cover for I believe strikes and spares - 50
Whirlwind translite(dirty) but could clean up nicely- 60
Austin Powers Translite - 80
Coin mechs untested, 2 of which are SBAs - make offer
20220429_154512 (resized).jpg20220429_154903 (resized).jpg20220429_155243 (resized).jpg20220429_155303 (resized).jpg20220429_155826 (resized).jpg20220429_155831 (resized).jpg20220429_160144 (resized).jpgQuoted from Jiggly_Martian:Unfortunately, Starship / Larry will not be at the show this year…
Maybe Jody?
I do not have any...but sometimes Marco brings ramps, and they have all of Larry's offerings.
Quoted from JodyG:I do not have any...but sometimes Marco brings ramps, and they have all of Larry's offerings.
If someone needs anything that Marco sells, I think you gotta phone your order in by Sunday night.
Quoted from Pinstym:If someone needs anything that Marco sells, I think you gotta phone your order in by Sunday night.
Thanks for that info, I was about to call to ask what the cutoff date was.
Looking for a Williams Standard Size lock down bar: Williams standard D-12615. Anyone have one they can bring to the show? PM me.
Quoted from SantaEatsCheese:Bent plastic dmd glare shields. All 3 for $10. Normally 11.95 each on website.
[quoted image]
I'll take them
OK - Just putting this out there if there is any interest. I have a project Haunted House and a project Black Hole that have been sitting here untouched for at least 5 or 6 years. Both need a little work but both should be fairly easy fixes. Price will likely be in the $2700 range for each or maybe $5000 FIRM if someone wants the pair of them.
First is the Black Hole. We bought that about 10 or 11 years ago and it played OK but then the left flipper started acting "weird" (like a bad coil sleeve) sometimes it wouldn't go down after you used it. Everything seemed fine mechanically but this machine has not had ground modes done so I am thinking some voltage is feeding back though that flipper coil or something. Anyway it sat here untouched for most of the time we have owned it (basically being used as a table). Before Christmas Wayne decided to try it again and see what happened with the flipper and when he tried it the ball would not kick up out of the lower playfield. So back to being a table is the direction that one went.
The Haunted House I took in on trade about 6 or 7 years ago. It was"suppose to be a fully working & shopped machine". We tried it and it played great but then we realized the cabinet knocker wasn't working. Wayne hooked up the knocker and turned the machine back on and something on the board exploded. He unplugged it and it has been sitting here as a table ever since.
Our plans were to get both of these fixed and then take them to the York Show this Fall. But if anybody wants to save some cash and buy them the way they sit message me and I can bring them along to the Allentown Show if I have room. It doesn't matter either way to us but I am not going to "give them away" just because each of them needs a little love. We don't need to sell them but they are next on the list of machines for us to get ready to sell so I figured I would at least see if there was any interest.
Quoted from Alan_L:Looking for a good, working, non-burnt Bally 7-digit display. Can pick up in the Baltimore area. Thanks.
Bump.
Still need this display badly, my EBD is ready to sell. Can pick up at Pinfest if it's good. Classic Stern and 6803 7-digits will not work.
Thanks for checking,
Alan
Collingwood, ON
Started to load today. Hopefully I'll have Baby Pac Man dug out for pictures that were requested by sometime Monday. THANKS for all the interest!
Another thing I can bring if anyone needs them is nice original Skeeball Balls. Asking $30 each for those and I have a set plus a few extras. They have been selling at $50 on eBay. Kind of crazy but not all that bad considering I was paying over $20 each for them close to 10 years ago and money is worth a lot less today.
Figured I'd cross post here. I was originally planning to bring this nice Star Trek Pro to the show but can no longer make it. I'm in northern VA near DC for anyone interested in the area or perhaps to or from the show.
I posted this Andretti previously in the thread and recently added it to marketplace…here’s the link. Although I hate selling something that’s not 100%, I just have too many projects at the moment. If someone is looking for a DMD project game, this would be a great candidate as the game’s really in decent shape. It has factory Mylar on playfield so it’s in nice shape except for some wear around the flippers. There are no issues with the sound, and the DMD works with no issues. If interested, let me know and I can bring it to the show…I’ll be there all three days.
Quoted from too-many-pins:Skeeball electronic parts are now spoken for. I will be bringing along a Skeeball 100 point scoreboard and subway ramps - a complete set up to change over your skeeball machine from a "normal" Skeeball to one with 100 point holes. Most (if not all) model S machines already are set up so this would just be "plug & play" changing over and adding the 100 point holes. I need $300 for the complete setup.
(If you are interested and want to be sure it will work on your machine look under your scoring hole assembly and the harness to the scoring switches should have two unused plugs. Those plug into the 100 point hole switches. If your machine has those plugs you should be "good to go")
To compliment what too-many-pins is describing, last month I introduced a new optical sensor system for model H and model S Skee Ball games that can be used with his playfield to add the 100 point capability to either model H or model S. In short, Skee implemented two different subway paths for 100-point scoring that each required a matching game ROM in order to score correctly. My Skee Optical Switches correctly handle both options with a simple jumper change. I made these to forever end the tweaking needed to keep the mechanical switches scoring correctly, but they also would be great for adding 100 point holes if one could find the parts that Skip is offering. What he is offering is a rare find. Come see my Skee Optical Switches in my vendor booth next to the free play area.
-Rob
-visit https://www.kahr.us to get my daughterboard that helps fix WPC pinball rests or my replacement Type 1 sound board for early Williams games
I still have the full plastics set for Iron Maiden: Legacy of the Beast (Pro) available.
$150
1A768218-1BAA-447F-B948-53227A30DE00 (resized).jpegQuoted from rkahr:To compliment what too-many-pins is describing, last month I introduced a new optical sensor system for model H and model S Skee Ball games that can be used with his playfield to add the 100 point capability to either model H or model S. In short, Skee implemented two different subway paths for 100-point scoring that each required a matching game ROM in order to score correctly. My Skee Optical Switches correctly handle both options with a simple jumper change. I made these to forever end the tweaking needed to keep the mechanical switches scoring correctly, but they also would be great for adding 100 point holes if one could find the parts that Skip is offering. What he is offering is a rare find. Come see my Skee Optical Switches in my vendor booth next to the free play area.
-Rob
-visit https://www.kahr.us to get my daughterboard that helps fix WPC pinball rests or my replacement Type 1 sound board for early Williams games
Rob - Thanks for posting the information you posted. My son knows all about the electronic end of this stuff but these days getting information out of him is like pulling teeth. Since he lost interest in the hobby I have a heck of a time getting him to help me figure out what all we still need to get sold - prices - or any additional information about stuff I don't fully understand. So your post might be a huge help for someone.
Quoted from SantaEatsCheese:Stern Apron from a Deadpool Pro. $20.
[quoted image]
I will take it.
Quoted from Gritty:I will take it.
Send me a pm... marking sold
Pair of working flipper solenoids from a LOTR. $20. Replaced with higher powered coils and were working fine when pulled
20220430_091649 (resized).jpg
Added 23 months ago: Sold!
Pile of random pinball crap. No guarantees on this lot. $40 obo
20220430_092550 (resized).jpg
Added 23 months ago: Price Drop! $20
Added 23 months ago:Sold!
Added 23 months ago:.
Collection of mame arcade parts. Game controller in bottom of photo is brand new. $40 for all.
Added 23 months ago:Price Drop to $20
Added 23 months ago:Sold!
Godzilla Apron wall stickers. $10
20220430_093148 (resized).jpg
Added 23 months ago: Price Drop! 5$ or an Amish Treat
Added 23 months ago:Sold!
Stern Whitestar Power supply drom Rottendog. Don't remember why I have it but it was in a sealed bag so I'll refund via PayPal if it doesn't work. $30
20220430_093618 (resized).jpg
Added 23 months ago: Price drop to $20
Added 23 months ago:Sold!
If any EHOH owners are interested in my video trailer apron mod let me know and I can bring them to the show so you save on shipping. As a show special I'll also include the back door sign mod with it for free.
Since you guys are all coming my way... Selling my Big Ben project pin. This was my first pin that I have had for 30 years. Got away from the EM games and this has been sitting for in the basement unused for 15+ years. GI lights come on when plugged in but that's it. Complete game with some documentation/schematics. 10 minutes from Pinfest in Allentown. Will bring game up out of basement for easy load out from garage.
IMG_0753 (resized).JPGIMG_0756 (resized).JPGIMG_0759 (resized).JPGSelling:
10 Pinballife Bent Plastics - 9 regular 1 wide body $80
Working and in great shape data East sound board - $100
Working Pair of speakers and subwoofer from data East - $50
Official Rick and Morty topper (wiring would need to be soldered back on to function otherwise still looks great on top of your pin or decoration )- $200
Stern Black Knight Pro apron and full (used and in good shape) plastic set - $100
Stern Stranger things premium metal apron and plastic set - $100
2 new Stern pro insider connect aprons - $50
Whirlwind - new mirrored backglass with trim channels, alternative speaker grillplastic, tilt graphics magnetic apron skin - all 3 pieces $400
Anyone interested in some Pinball wall hangings. Framed and Matted Pinside print #ed 23/100, an original Cactus Canyon translite in pristine shape that’s in a lit translite frame, an original Flash Flyer framed and signed by Steve Ritchie and a Whitewater alternate art print. Can have at show and picked up at my buddy’s vendor booth. Send me an offer, only selling as a lot.
3D620493-E0B8-4F1F-BC4F-D0A6EB91C456 (resized).jpeg4A250BE7-00F1-4DA0-881C-10297C0F03D5 (resized).jpeg7519523F-D11E-4B57-8E5F-448573F8BBF7 (resized).jpeg7602669B-142C-496D-BD15-8B1C0022CB70 (resized).jpegFor sale:
TMNT katana shooter ( check reviews before purchase. Some have difficulty getting dialed in)
Iron Maiden shooter. Rod only, no assembly. SOLD
Millwax
16513420489642634840930489077144 (resized).jpg16513421085288856151680258858308 (resized).jpg1651342149729525429399074695053 (resized).jpg
Tournament Tees are in!
Available to all.
Limited quantities so come by the tournament area early
$25 standalone
$20 when purchased along with a tournament entry
Hot t shirt model not included
98D3630A-502A-44DB-95FF-8FC10AD53853 (resized).jpegABD01822-6255-4265-9AAA-191CF2F2C0B6 (resized).jpegB9F5E0FA-CD5A-48F1-8DD1-A24FCD65FD77 (resized).jpeg
Quoted from heckheck:Bunch of Xenon parts available for delivery to Pinfest and some other stuff
Xenon CPR original run "Artist's pick" (I drew for CPR back in the day and this field was selected from amongst the entire batch by Kevin for me personally) playfield. GORGEOUS!!!! $949 This is a spot color screened field. I'm asking the same prices as the current direct ink run, but I think this original run piece is IMO betterXenon plastic set CPR $150
Xenon plastic tube replacement $20
Xenon pop caps hot stamped PBR, $20/lot (new, unused qty. 4)
Xenon original game manual w/ 3 cards and 4 extra "seed" tube bulbs $30 (yellow pullout schematics)
Embryon pop caps hot stamped PBR, $20/lot (new, unused qty. 4)
Pop cap trim rings orange, $8/lot (new, unused qty 4)
Skateball drop targets hot stamped PBR, $33/lot (new, unused qty. 11) -- SOLD
PinballPal Fathom Stencil set. Stored flat, but the adhesive paper is buckling. Still could be used with some care and attention. $25
Speakeasy pop caps hot stamped look unused, 4 available, 3 missing one tab, $10 for lot
[quoted image][quoted image]
Xenon playfield PRICE DROP -- $899 now if someone wants this at the show, see post 1031 for pictures
I have the following items that I can bring to pinfest on Friday. Email me if you are interested.
1) Used Funhouse playfield
2) New Medival madness blade
IMG_0978 (resized).jpgIMG_0979 (1) (resized).jpgIMG_0979 (resized).jpgIMG_0980 (resized).jpgIMG_0981 (resized).jpgIMG_0982 (resized).jpgblades (resized).jpgBringing a Chicago Coin Hollywood project and Stardust working project to Pinfest.
Make an offer! Ad in marketplace for Stardust.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
