Anyone have a NOS or CPR Meteor Playfield they’d sell?
(Topic ID: 297596)
York, PA
Do your ramps keep mating? OMG, so many ramps!
Quoted from Santis:Demolition man $70
[quoted image]
Looks like my Meteor is going to make it to Freeplay! Maybe maybe not for sale. Haven't decided yet, but I have a leaky kitchen roof to pay for... So maybe.
Quoted from too-many-pins:OK - the latest from "crazy land"
I finally got a partial list of Skeeball Stuff we will be selling as a lot. I thought I had a local guy that was interested but he is looking more for alley parts and I have more of the electronics for these machines. I have three other guys interested but they are all either "long distance deliveries - for sometime in the future" or they want the stuff shipped.
So here is a "partial list" of what I have for sale as one big lot. I have ZERO interested in selling a part or two - it is basically all or nothing and price is going to be $1500 FIRM
Stuff includes:
1 full case of tickets (for ticket dispenser)
Model H Power Supply ( untested - missing cover )
Model H Power Supply ( no 5 volt but is complete )
Model H CPU - we think it is fully working
Model V Control Unit (not working)
Model S Control Box from Scat Cat (with Scat Cat extras)*
* could be modified to used in a Skeeball Machine - just a few minor changes
Model S Control Box - complete & working
Model E CPU (no cover & untested)
Skee Toss CPU boards
Smart Ball - power supply / MPU & Driver Board
TWO Nice Score display bezels with red lense
one - fair but needs some love Score Display with lense cover
Model H display - untested missing one chip
Model H score display - works
Model S display (most sockets replaced - working
Over 100 light sockets for displays - (long out of production) currently selling for $5 each on eBay
Over 400 bulbs for Beacon and other things on earlier Skeeball machines.
Over 100 LED display bulbs
A few boxes of regular display bulbs
one Skee Ball backglass
one Smart Ball backglass
And some smaller odds & ends from the alley part of these machines (but not much of that stuff)
Well over $6000 retail value for $1500 FIRM[quoted image][quoted image][quoted image][quoted image]
OK - A couple local people who had shown interest have decided this stuff was not a good fit for them so it is still "up for grabs". I am going to finalize my load for the show by Sunday night and finish loading Monday morning. So time is "running short" if I am going to bring this stuff along to the show for someone. I figured I would bounce this to a more recent post just in case anyone else was "on the fence" about it. I doubt I'll bring it to the show UNLESS it is pre-sold.
Quoted from JodyG:While we are on the used ramp theme...if anyone has a set of used ramps from Dirty Harry or Dr. Dude, I would like to buy them so I can update some accessory tooling.
I have a nice new one that someone made if you want to borrow that. 
Chris
Quoted from dddanielll:Anyone have a NOS or CPR Meteor Playfield they’d sell?
I have a CPR one I'd sell.
Quoted from Smurf45:Looking for a nice Bally eight ball playingfied
I have a NOS Bill Davis clearcoated one I'd sell.
Quoted from boostedskex:Want to buy - Whirlwind. Let me know if you have one for sale.
Thanks,
Alex
I have a complete project one that has the topper I'd sell. (SOLD)
Looking for 2 Classic Stern Lockdown Bars, for Stern Magic, Stern Seawitch.
Looking for 1 classic stern coin door
Looking for a system 11 working MPU for High speed
Thanks
Stephen
Bally Beauty Contest playfield 70
Bally Beauty Contest backglass slight Crack on bottom 60
take both for 100 SOLD
Strikes and spares playfield (no coils) would be a good swap if you have a blown out PF,.. 80 SOLD
20220401_173649 (resized).jpg20220401_173640 (resized).jpg20220401_173719 (resized).jpg20220401_173727 (resized).jpg20220401_173557 (resized).jpg
Skeeball electronic parts are now spoken for. I will be bringing along a Skeeball 100 point scoreboard and subway ramps - a complete set up to change over your skeeball machine from a "normal" Skeeball to one with 100 point holes. Most (if not all) model S machines already are set up so this would just be "plug & play" changing over and adding the 100 point holes. I need $300 for the complete setup.
(If you are interested and want to be sure it will work on your machine look under your scoring hole assembly and the harness to the scoring switches should have two unused plugs. Those plug into the 100 point hole switches. If your machine has those plugs you should be "good to go")
I also have some very nice ORIGINAL Skeeball Balls for $30 each if anyone needs them. (They are bringing $50 each on eBay these days) I doubt I'll bring these unless someone asks me to bring them along.
Quoted from K9Marshal:I have a new whirlwind mirrored backglass and alternative speaker skin - if interested PM me
I'll take the dog. 
Bringing my Star Wars Home Edition--note HOME EDITION, not Pro--to Pinfest in the free play area on FRIDAY ONLY. It will be on free play all day--and forever (duh). 
Selling it for $3,500, cash only. I bought it new from Cointaker for about $4,230, including tax, and I am the first owner. It's been in my condo association clubhouse for condo residents to enjoy since I bought it, and it has about 300 plays on it. I made a 20-minute video detailing everything about the machine, warts and all, including some game play, and focusing in particular on the home edition components. The video sure won't win any Oscars. but it will give anyone interested a more thorough walk-through than I'd be able to give you at the show. If you're interested, the link to the 20-minute video is here:
https://drive.google.com/file/d/1jAqV8lcibQOLBOjLfu6flCNwLalGWGfR/view?usp=sharing
Thanks for considering. Feel free to PM me if you need further details.
Quoted from JOESCHALL:Bringing my Star Wars Home Edition--note HOME EDITION, not Pro--to Pinfest in the free play area on FRIDAY ONLY. It will be on free play all day--and forever (duh). Selling it for $3,500, cash only. I bought it new from Cointaker for about $4,230, including tax, and I am the first owner. It's been in my condo association clubhouse for condo residents to enjoy since I bought it, and it has about 300 plays on it. I made a 20-minute video detailing everything about the machine, warts and all, including some game play, and focusing in particular on the home edition components. The video sure won't win any Oscars. but it will give anyone interested a more thorough walk-through than I'd be able to give you at the show. If you're interested, the link to the 20-minute video is here:
https://drive.google.com/file/d/1jAqV8lcibQOLBOjLfu6flCNwLalGWGfR/view?usp=sharing
Thanks for considering. Feel free to PM me if you need further details.
PM sent
Quoted from insight75:Eight Ball Playfield.
[quoted image][quoted image]
Just noticed how similar this playfield is to Quicksilver.
London, ON
Quoted from cooke:I'm looking to upgrade my Team One backglass. Mine is not terrible, but if anyone has one out there that is basically a 9+, I'd definitely be interested. Thanks!
[quoted image]
You need to talk to @pinhead52.
Translite backglass 27” x 19” used very good condition $20 each Qty of 1 came off TZ, IJPA and FT as they were replaced w BGs
IJPA used ramp good condition small crack at entrance $20
Plastics all for $20 sold
Bally Coin door with rails $30 OBO
Fathom PB caps, used $10 sold
Speakers new condition never used all 3 $20 sold
70F5903D-9923-49BF-8DCE-165751A645DD (resized).jpeg83606969-B0B8-40CE-8C4D-8966B89916C4 (resized).jpeg37AFE084-1313-4795-8F6B-244065299330 (resized).jpeg
Quoted from Madmax541:Bally Coin door with rails $30
PM sent.
For Sale, 1972 Gottlieb Flying Carpet - $2000.00
Completely shopped and gone over in 2017. This pin looks fantastic.
Playfield was stripped and waxed. It is very presentable however exhibits some planking. All the standoffs, pop bumpers, roll over guides and rubbers have been replaced. The playfield hardware has been polished or where needed replaced.
The cabinet has been stripped to wood and painted to correct color scheme and webbing. The door, coin entry, shooter housing and legs have been sand blasted and powder coated black wrinkle.
The backglass is a BGresto replacement. A new back door has been fabricated. All locks have been replaced.
Reproduction instruction cards have been installed.
Pictures reflect condition
Will bring to Allentown PinFest with a deposit.
PXL_20220403_224530710 (resized).jpgPXL_20220403_224543673 (resized).jpgPXL_20220403_224554669 (resized).jpgPXL_20220403_224600492 (resized).jpgPXL_20220403_224608613 (resized).jpgPXL_20220403_224650882 (resized).jpgPXL_20220403_224712841 (resized).jpgPXL_20220403_224716405 (resized).jpgPXL_20220403_224721341 (resized).jpgPXL_20220403_224728642 (resized).jpgPXL_20220403_224731397 (resized).jpgPXL_20220403_224738303 (resized).jpgPXL_20220403_224754483 (resized).jpgPXL_20220403_224917092 (resized).jpgAnyone with loaded or semi-loaded Bally or Stern playfields? Drop me a note, I'm looking for standard playfield titles to restore and try in my Bally/Stern universal cabinet.
Kings of Steel
Galaxy
Stars
Night Rider
BMX
Meteor
What else you got? Thinking about converting an EM title over to solid state and making custom rules with a nano controller using the Bally -35 MPU.
6f5d82d0f25d6f9b7c90d221c9f93c1dd9943fed (resized).jpgTron mods wanted:
Tron Topper
Flynn Sign
Eli ramp lights kit or redshift
End of ramp florescent covers.
Quoted from Pinwizkid:One week until the show! Upvote this post if you're bringing a game to free play
Parking lot only deals need not apply
I can't upvote multiple times but I'm bringing multiple games for freeplay!
Quoted from Pinwizkid:One week until the show! Upvote this post if you're bringing a game to free play
Parking lot only deals need not apply
Quoted from DorkInAbox:I can't upvote multiple times but I'm bringing multiple games for freeplay!
Ditto... Rick and Morty and Attack From Mars Remake Limited Edition.
I'm looking for a topper for an Indiana Jones ('93) made by Tilttopper if anyone has one for sale. I'll be at the show on Friday. Please PM me.
Quoted from PowderNoid:For Sale, 1972 Gottlieb Flying Carpet - $2000.00
Completely shopped and gone over in 2017. This pin looks fantastic.
Playfield was stripped and waxed. It is very presentable however exhibits some planking. All the standoffs, pop bumpers, roll over guides and rubbers have been replaced. The playfield hardware has been polished or where needed replaced.
The cabinet has been stripped to wood and painted to correct color scheme and webbing. The door, coin entry, shooter housing and legs have been sand blasted and powder coated black wrinkle.
The backglass is a BGresto replacement. A new back door has been fabricated. All locks have been replaced.
Reproduction instruction cards have been installed.
Pictures reflect condition
Will bring to Allentown PinFest with a deposit.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
You have anymore back doors? I need one and dont wanna pay shipping from pbr... will be in the fleamarket...
And then I see your post, save me one...
Selling some more stuff:
Stern MPU-200 (Pulled out of a Flight 2K) - Working - $45 SOLD
Stern MPU-100 with NVRAM (Pulled out of a Stars) - Working $60 SOLD
Stern LDA-100 - Working - $20
Stern MPU-200 (Pulled out of a Meteor) - Working - $45 SOLD
Stern TA-100 Working - $5 Each SOLD
MEI AE2600 - Couldn't get it to enable - $25
IMG_5051 (resized).JPGIMG_5052 (resized).JPGIMG_5053 (resized).JPGIMG_5054 (resized).JPGIMG_5055 (resized).JPGIMG_5056 (resized).JPGIMG_5057 (resized).JPGIMG_5058 (resized).JPGIMG_5059 (resized).JPGIMG_5060 (resized).JPGIMG_5061 (resized).JPGIMG_5062 (resized).JPG
Quoted from BZarrCaptain:Hello, if anyone has any Funhouse ramps I'd really appreciate a heads up.
Unfortunately, Starship / Larry will not be at the show this year…
Maybe Jody?
Quoted from NYP:which vendors sell playfield glass?
Ivan was getting a bunch of sheets
Bally Mata Hari Backglass.
Nice example with minor scuffs.
$190
7CA54AB7-CA2E-407C-9B4C-5EAE39B5E7BD (resized).jpegDF82C9D9-E59C-4C91-A313-67715DF97B1D (resized).jpegEBBFBF7E-465F-4767-9C2F-FDB87063A15E (resized).jpeg1EDD370E-08DC-4544-BEB9-7BF5B5240961 (resized).jpegFBFFE9D6-E9F2-44F4-B224-72CF79FE6E04 (resized).jpegQuoted from pinhead52:You have anymore back doors? I need one and dont wanna pay shipping from pbr... will be in the fleamarket...
And then I see your post, save me one...
I will be in the parking lot - red toyota - white trailer - there will be a sign on the trailer if I am not there drinking hop infused water
Quoted from DorkInAbox:I can't upvote multiple times but I'm bringing multiple games for freeplay!
Me too I'm bringing 5 for freeplay/ sale
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
