You're currently viewing posts by Pinsider flynnibus.
Click here to go back to viewing the entire thread.
parts I can bring if people want to buy...
Bally MPU-35 boards - Upgraded with NVRAM and fully working
Bally 2518 Solenoid Driver Boards - Upgraded with Gnd mods, new caps, fresh headers, etc fully tested and working
Bally Light Driver Boards, probably a -54 power rectifier too
Scared Stiff Mirco Playfied - NIB
Scared Stiff PPS Plastics Set - NIB
Quoted from WonderMellon:I am picking up a pin on Friday, and have plans to do some "shopping" while in Allentown. My plan is to bring home 2 machines and possibly a 3rd. Got a decent deal on a small rental truck. Has wooden floors and tie downs, but no ramps. This is my first time renting a cargo truck. For those of you with more experience with this, how do you get the machine from the dolly on the ground to inside the truck if you do not have a ramp? Looks to be about a 3 foot distance from the ground to the bed of the truck.
Also, I now have way more cargo space than I need. If someone needs help getting a pin to or from Allentown to Columbia, MD. Send me a PM.
3ft sounds just about the same as a pickup truck
Step 1) Pin on it's back... legs off, head folded
Step 2) tilt towards truck and let bottom of cabinet lean on truck bed if it reaches.. dead lift the bottom with two people to lift the game up to the point you can let the edge on the truck bed take some weight, and then lift all the way up and slide it into the truck. Let the supported end take weight once you get it lifted high enough
Step 3) Curse at yourself for renting a truck without ramps or a lift
Quoted from WonderMellon:flynnibus
Ok, Pinsiding while at work can be dangerous. I literally LOL'd at Step 3 while in a conference call.
For step 2, I am just worried that it will scrape up the bottom of the cab.
As for step 3, the next size up has a ramp, but they were out.
Thanks for the chuckle.
The games slide on the bottoms all the time.. it's bare wood. As long as the surface is relatively smooth no issue. Common tricks
1) Big sheet of cardboard... protects and makes it easier to slide around too
2) 1" piece of PVC cut to about 30-35" long.. put under game as you rotate it up.. acts as a roller. helps to have two
Blankets tend to bunch up and get stuck, etc.. big square of cardboard is better. I have a nice thick wardrobe one I lay under the game as I lean it against the truck. Protects against the edge, and makes it easier to slide too.
Quoted from Alan_L:Step 1 1/2) coin door end in first.
When you start with the game on it's back.. that's the only way it can go in.. 
But yes, that's a good point to highlight to people when they are loading a game from it's legs.. or coffin carrying it.
Quoted from moonraker:Selling gorgar printed Vinal pic framed. World Cup 94 striker framed, aspen back glass perfect, stern dmd perfect with orange tint glass came out of my Metallica. Would like to sell all together but will break up. Figured $150 for both pics, $60 backglass, $140 dmd. Make an offer for all.
[quoted image][quoted image][quoted image][quoted image]
To help you out.. used led DMDs we couldn't sell for $100 last year.. I sold one mainly because it had all the mounting brackets/hardware as well. Beyond that.. used plasmas are like 50-75.. and leds are probably lucky to get 80-100.
Quoted from knockerlover:Really Nice Iron Maiden Pro listed..
Machine - For Sale
Iron Maiden: Legacy of the Beast (Pro)
New!
NOB - New out of box (first owner) “Iron Maiden Pro
Shaker Motor
Molded Figures with Factory Mounting
Lermods Lighted Fighter Plane
Lermods Lit Coffin
Flipper Fidelity Backbox Speakers
Lighted Speakers
Quiet Fan Ins...”6 minutes ago
Warrenton, VA
5,250
knockerlover
Holy cow!! Fire sale! This pro is packed and is the real deal (I've played it). This is the maiden everyone needs... Great deal!
Have to bring you if you contact me..
A Mirco Scared Stiff playfield... still in box $900
Scared Stiff plastics from PPS - never opened - $110
Bally SBD boards tested and rebuilt (caps done, ground mods, headers, etc) - $80
Bally MPU tested with nvram added - $90
Bally -54 power rectifier tested and clean - $50
Bally -52 Aux lamp driver tested and clean - $50
Translites
Twilight Zone original - used
Indy500 - used
Stern avengers new
Street fighter ii new
Junkyard new
Metallica pro - jon borg signed
Ripleys believe it or not.. - new
Quoted from Daditude:I've never been to pinfest...it looks incredible though!
How does it compare in size to other fests/expos? Is it the biggest?
Biggest buy/sell for the east coast
Good size free play area - maybe biggest on east coast.. smaller than TPF
Good vendor representation
plenty of video tours on youtube . - https://www.youtube.com/results?search_query=allentown+pinball+show+2018
The getaway plastics set (used) $50 at show - https://pinside.com/pinball/market/classifieds/ad/75602
Also have a mostly complete (just haven’t inventoried) used set from twilight zone that I could deal on... pm me
You're currently viewing posts by Pinsider flynnibus.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinfest-2019-buy-sell-trade-want-no-hotel-talk?tu=flynnibus and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
