Looking for a piece of used or new playfield glass for a Pitch & Bat. Measures 38" by 23", 3/16" thick. Needed for the show, can pick up there.
Looking for a piece of used or new playfield glass for a Pitch & Bat. Measures 38" by 23", 3/16" thick. Needed for the show, can pick up there.
Quoted from Alan_L:Looking for a piece of used or new playfield glass for a Pitch & Bat. Measures 38" by 23", 3/16" thick. Needed for the show, can pick up there.
I have one that is brand new that is 39 x 23 that was cut for a Williams Line Drive a while back. I asked a ton of pinsiders and that’s what they gave me for measurements
Quoted from Jive:Be sure and stop by the Lock is Lit Podcast booth.
Looking forward to stopping by!
Anybody want this crap?
Dragonfist backglass, rough shape but cool wall hanger, $50
Secret Service misc plastics, $10
Box of crappy misc plastics for Bad Girls, $5
Party Zone Translight , has a sticker on it that I don’t have the energy to peel off. $20 (last I knew these weren’t that easy to find) —- SOLD
LOTR original manual, $10
003E7485-7A04-4A1E-A252-9A1071DA192B (resized).jpegA5EAF73A-5B92-41B2-B95F-E50ABC681A60 (resized).jpegimage (resized).jpg
Flyers
Walking dead $15
Wrestle mania $15
Freddy $20
W?D $20
Can deliver fri at show
Im at the show Friday if anyone needs programmed parts . I wont have a booth but can bring presold eproms , proms , gal , pal pic chips . I am rompingirl on ebay but prices would be lower direct.
Anyone have any interest in a Stern Big Game? On location at a brewery at the moment but gets basically no plays.
Edit: Ok, lots of interest so I think I'll take it with assuming I can get it out of the brewery.
I'll try to add some pix tonight.
Last action hero spinner $40
Gottlieb mpu/driver harness new $35
SFII key chain plastic $10
Shadow mongls.all Four $100
Quoted from shacklersrevenge:Anybody want this crap?
Dragonfist backglass, rough shape but cool wall hanger, $50
Secret Service misc plastics, $10
Box of crappy misc plastics for Bad Girls, $5
Party Zone Translight , has a sticker on it that I don’t have the energy to peel off. $20 (last I knew these weren’t that easy to find) —- SOLD
LOTR original manual, $10
[quoted image][quoted image][quoted image]
[quoted image]
Will you be at allentown on saturday? I might be interested in the bad girls parts. I want to pick up another sometime in the future and extra parts wouldn't hurt
Quoted from pinhead52:Vegan right?
There's a Mediterranean place at the far end with lots of options, including gyros, which is not a good vegan option.
Quoted from CraigC:There's a Mediterranean place at the far end with lots of options, including gyros, which is not a good vegan option.
I an not vegan, and generally I would not call the Farmers Market a Vegan hangout. Cant wait to sample the delites
Hi some odds and ends for sale pick up Friday
meteor complete target bank with coils $40
jokerz speaker panel and non working display $40
taxi speaker panel $30
big hurt speaker panel with non working display $30
unknowngottlieb speaker panel with non working display $30
Diner speaker panel . has burn in the middle of plastic $40
2 crusty data east lock bars powdercoating potential 2 for $20
Probably bringing this
Just got from homeowner
Game goes into attract mode but didn’t kick a ball out and takes a couple minutes for it to start up properly
Back rubber need replacement
Nice playfield
Just wiped it off quickly
So it will shine with proper cleaning
Full set of original Bally Space Invaders plastics, including brand new clear spacer plastics (1st layer below Clone Chamber). $50
Original Space Invaders Manual w/ full pull out schematic diagrams.
$15
I will be at Pinfest on Friday, but can also deliver Saturday if needed.
6FA1E617-8D5E-47EF-B0C3-CD7BF9D61ECE (resized).jpeg8404FFC0-0C90-40A3-96A1-92169EC6433E (resized).jpeg
Can bring these neons if there’s interest
05DB613E-04AA-4A78-A294-D5F9E07E6805 (resized).jpeg4CDC0FF1-F700-43F7-95E1-8E755FB802B8 (resized).jpeg670C8A0C-D588-4DC3-874B-BB8EF9CDCD77 (resized).jpeg8BB282C9-EC46-4AF7-9D82-6CC101BA988A (resized).jpegDF13072D-B6AE-433A-AD1C-36E8D36EC768 (resized).jpeg9DC9100B-8D69-4B12-9F94-A9201FAC7592 (resized).jpegEE2EA004-6424-4CDD-81B7-4ECE37A04AC1 (resized).jpegBackglasses that I can bring on Saturday.
354A3011-094C-49CC-9641-C578E1A66FFA (resized).jpegCA16BF60-94DE-480F-956B-3D7F7A156DE7 (resized).jpeg65C6A322-B597-40B9-96CB-14F3698CB7A8 (resized).jpeg2AD53984-0700-4905-9681-6D11F8A395DD (resized).jpegCC7E7793-8212-414D-ABC4-495B328F93FE (resized).jpegF05B909C-2EEA-49EE-AEF9-F53826395342 (resized).jpeg333BC326-7D15-45D4-82D8-856CD681B795 (resized).jpeg4EA6F607-DAE9-48BD-A9A0-D45C462CB187 (resized).jpegStill looking for the following...
PF'S, PLASTICS, TRANSLITES, PARTS:
- Class of 1812
- Mystery Castle
RANDOM ITEMS:
- XPin high voltage DMD in white
- NVRAM
- LED OCD for WPC
- Black WPC rails and/or lockdown bar (powdercoated or non) for my BSD
Also, I have this screen print from my game room, 'Death Racer', it's 18" x 24" artist signed and numbered in the 40's out of 100 total. I'm looking to move for $40. I was going to pair it with a MET but a different game came along. No holes, creases or scratches. Perfect condition.
System 11 MPU, System 3 MPU & DE MPU
AB027987-C7D2-4570-B897-1D931CDE6DD3 (resized).jpeg2A88A5DA-F9FA-4027-865A-5D385A06B4AC (resized).jpegB4175FB4-3C27-4203-B037-A48B2B0FBC05 (resized).jpeg4C3251AF-8357-4ACE-910E-92CF3722784F (resized).jpeg
270208FF-0FAD-4CCB-956B-CEDFD0C1A116 (resized).jpeg8AED2BCF-AA6B-40A4-A7A6-C03B83153DD3 (resized).jpeg
Quoted from Rillo:I have a Volley Backglass if someone are looking for one, I can bring to the show on Friday. I bought from Steve Mayfair and I will not need n more. I paid $200 LMK Tnx
[quoted image][quoted image]
Hi. A Pinsider was seeking a Volley backglass 5 days ago in Post #1228.
Cheap!
-SOLD-Set of mirror blades designed for B/W that didn't fit my AFMr, I tried to widen the hole on one side but it didn't really work. $20
All the bulbs that came out of my Jurassic park when I LED'd it. 95% work. $10
-SOLD with 2 alternates, Sorry- Set of pinball legs with bolts that came off of a B/W WCS 94. $10
1 quarter mech. $10
Broken Hobbit Smaug for Parts $100 (1 day only!)
Electric Soldering Iron $5
May also have room in my van going North from Crofton MD to the Pinfest if you need last minute 1 way transport.
I will be there on Friday only most of the day. PM me if you are interested in anything.
20190501_181340 (resized).jpg20190501_181347 (resized).jpg20190501_181425 (resized).jpg
20190501_181114 (resized).jpgQuoted from Rillo:I have a Volley Backglass if someone are looking for one, I can bring to the show on Friday. I bought from Steve Mayfair and I will not need n more. I paid $200 LMK Tnx
[quoted image][quoted image]
I think someone further back in the thread was looking for one
Quoted from wastedwarriors:Can bring these neons if there’s interest
How much for the Newcastle one?
Have to bring you if you contact me..
A Mirco Scared Stiff playfield... still in box $900
Scared Stiff plastics from PPS - never opened - $110
Bally SBD boards tested and rebuilt (caps done, ground mods, headers, etc) - $80
Bally MPU tested with nvram added - $90
Bally -54 power rectifier tested and clean - $50
Bally -52 Aux lamp driver tested and clean - $50
Translites
Twilight Zone original - used
Indy500 - used
Stern avengers new
Street fighter ii new
Junkyard new
Metallica pro - jon borg signed
Ripleys believe it or not.. - new
Quoted from Pbpins:Elvira IGT slot machine topper with rock base.[quoted image]
PM sent
Quoted from SantaEatsCheese:Set of pinball legs with bolts that came off of a B/W WCS 94. $10
1 quarter mech. $10
Broken Hobbit Smaug for Parts $100 (1 day only!)
Electric Soldering Iron $5
May also have room in my van going North from Crofton MD to the Pinfest if you need last minute 1 way transport.
I will be there on Friday only most of the day. PM me if you are interested in anything.[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
I’ll take the legs for a project Shangri-La I have! Sending PM
For sale Comet pinball machine with new hardtop and Comet LED's throughout. I have just completed the hardtop for the machine. The games plays 100%, but the lights on the J7 connector are not presently working (they did work less than 2 weeks ago). I have run out of time to figure out the issue, but I am willing to bring machine and sell at a slightly reduced price if prepaid. If not I will keep the machine and fix the problem in the coming weeks. Playfield is beautiful, ball plays fast on it. There are Comet LED's on playfield and backbox (except for a couple flashers). Cabinet is in good condition. Loading truck tomorrow morning so not much time to review. Price is $2,300 as is. PM if you are interested. You can pickup Thursday, Friday or Saturday.
IMG_1438 (resized).JPGIMG_1439 (resized).JPGIMG_1440 (resized).JPGIMG_1441 (resized).JPGIMG_1442 (resized).JPGIMG_1443 (resized).JPG
Quoted from fatality83:Can anyone recommend a good place to eat at for a first time pinfester? I have heard there is a farmers market somewhere nearby. Prefer to stay close to the show so I can play more pinball
Right across the street, you cant miss it!
Last minute post here. Coming from West of Buffalo NY so will bring this game if someone wants it. I'll need a deposit before hand - don't wanna stay up late packing this up if it isn't sold.
Revenge from mars that looks really very nice and clean. When I was looking for this game it was one of the nicest ones I could find.
Revenge From Mars, had it about 6 to 7 years. Its in nice shape - there are a few small dings on the cab, and a good half-dollar sized chunk out of the back particle board that covers up the monitor / top part.
The game plays fine, there is a small tear in the ramp that pops up but it doesn't affect game play. Otherwise it looks great on the PF.
There is some flyback whine (high pitch TV monitor noise) that goes away after about 5 minutes. Monitor is the old school CRT type - you can replace with an LCD.
Price: 2500 bucks, and I'll bring it to Allentown Friday. I'll wrap in in tons of plastic stretch wrap with another pinsider who is attending the show. It will travel in the back of a new pickup truck - not in a minivan or SUV, so if it rains... the plastic will get wet. Again - we will wrap it up super nice.
Sorry for the last minute post. if you are interested please PM me ASAP so we can nail this down.
5edc8b975a0583cb795954b6ef62dd6a514ef02c - Copy (resized).jpg5edc8b975a0583cb795954b6ef62dd6a514ef02c - Copy (resized).jpg625b880a5c78606a4da2e8687eb99555d8d7164e (resized).jpg67ed9631d6c4b86fea4e0b67f283312c1c8c059b (resized).jpg7afe41855c059b3377499c6e4c544090b9fa31b5 - Copy (resized).jpg91bcce148caa0bde8722bcc8732422035febb992 (resized).jpgI've never been to pinfest...it looks incredible though!
How does it compare in size to other fests/expos? Is it the biggest?
Quoted from Daditude:I've never been to pinfest...it looks incredible though!
How does it compare in size to other fests/expos? Is it the biggest?
Best one I’ve been to. More exciting than Pinburgh, seriously. So many games to check out, so many great deals to be had.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinfest-2019-buy-sell-trade-want-no-hotel-talk/page/34?hl=mistermoberg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.