Quoted from Mrawesome44:I dont see the point in telling people hes not interested in gold trim when i am. Your right at first i wasnt but i gave it another chance.
You were not interested. No salt. Thought I was helping narrow the search.
Quoted from Mrawesome44:I dont see the point in telling people hes not interested in gold trim when i am. Your right at first i wasnt but i gave it another chance.
You were not interested. No salt. Thought I was helping narrow the search.
Quoted from Mrawesome44:For not wanting your gold trim mmr. Only reason you posted above is cause your salty.
Arrr, the ladies say I’m too salty!
(FGY)
My dad has a lot of 4 Gottlieb System 1 project/parts pins he can bring if a sale is aranged
Countdown ( works some issues)
Totem ( project/parts)
Pinball Pool ( project/parts)
Dragon ( project/parts)
$1200 obo for them all
I have a 98% done restored EM Gottlieb Sing along wedge head I can bring if a sale is pre arranged . Works plays fine but has a reset issue in the 0-9 score reel ( trying to get that resolved) and need to finish the paint on the head $650
83785655-5CF2-4FE0-8633-C0EF6A768966 (resized).jpeg
2F602F4A-1EE4-4330-85BE-EC6EDFF39915 (resized).jpeg
705C9EBB-3A82-4CE5-9149-5D90141E1D56 (resized).jpeg
D14E8536-04B0-4F99-A182-B7B09C26C1FA (resized).jpeg
74A2CEA1-0D31-4ACC-8D44-D3561DD52A54 (resized).jpeg
BE3821DC-C80F-4FD7-8E7F-6CFDAF206644 (resized).jpeg
Added over 6 years ago: Sold
whatever way you go to allentown show, avoid rt 100 if you used it in the past. they are repaving a 6 mile stretch from rt23 south. went through it today. will not be done for months. took almost an hour to move 5 miles
Looks like Rich @jigglymartian & I are expanding to 4 vendor spots. Lots of good stuff to bring. We will probably be right around 20 machines or so for sale. Some projects and some really excellent stuff. May have to dig it to my Personal Collection to fill some space on my side.
I'm sure we will be putting a list together when it gets a bit closer.
Hi,
I have a few parts I can bring if anyone is interested. I’ll be at the show Friday only.
Transformer board out of a Sinbad. The small transformer is fried and desoldered. Everything else is there and was working when it was pulled. I have all of the wires labeled going to the small transformer. $65 OBO
Transformer board from a Stern Super Cobra cabinet. Unknown if its works and partial wire harness. Make offer.
Stern coin door from the Super Cobra cabinet. Someone used a pry bar in the coin return and is bent, otherwise not bad shape. $10 OBO
Coin door from Atari pit fighter in decent shape. $30 OBO
PM me if you are interested and I can send pics.
I have a completely restored CQ Banzai Run that I can bring to Allentown if pre sold.
The game is stunning, Clearcoated playfield, all led’s from cointakers, painted piano black
Honestly the nicest Banzai !
Not cheap but worth every penny !
Pm me for more details and pix.
Quoted from Troyster42:Hi,
I have a few parts I can bring if anyone is interested. I’ll be at the show Friday only.
Transformer board out of a Sinbad. The small transformer is fried and desoldered. Everything else is there and was working when it was pulled. I have all of the wires labeled going to the small transformer. $65 OBO
Transformer board from a Stern Super Cobra cabinet. Unknown if its works and partial wire harness. Make offer.
Stern coin door from the Super Cobra cabinet. Someone used a pry bar in the coin return and is bent, otherwise not bad shape. $10 OBO
Coin door from Atari pit fighter in decent shape. $30 OBO
PM me if you are interested and I can send pics.
If someone doesn't have a small transformer, I worked up a possible alternative to get a game back up and running:
Larry The Lobster mod for AFM new, never used. I do not know if it works for AFMR. $50 and I will bring to Pinfest if prepaid. I will be there on Friday but leaving early, around 2 or so.
https://www.timspinballmods.com/products/attack-from-mars-larry-the-lobster-mod
Looking to purchase the following Gottlieb EM's for pick up at the show. Need to be complete but not working ok.
Quick/Fast Draw
El Dorado
Jumping Jack /Jack in the Box
Aquarius
Flying Carpet
Pro Football
Nice 70's wedgehead considered too
Please PM with pics/Pricing.
Thanks. Ken
Quoted from Ranhorton:Looking to pick up Slugfest (kids are becoming baseball fanatics).
Or a Star Wars Trilogy stand-up arcade (kids are already Star Wars fanatics).
Feel free to PM me in advance of the show to arrange something.
I have a slugfest but not sure I am bringing it to the show I am only about an hour away from you.
Comet Pinball project with extra Playfield, as found, absolutely not tested.
Playfield 1 has loads of wear.
Playfield 2 is decent.
Corkscrew ramp is bad. Million shot ramp has slight cracks.
Cabinet has scratches and chips.
Electronics have slight evidence of alkaline damage.
Power supply included.
Backglass is very Nice.
Asking $875.
Hoping to buy a nice Gottlieb Big Hit. Already purchased my playfield glass for pick up. Gonna be a fun weekend!
Just picked up a Williams fantastic that we can bring to the show. The cab and back glass looks nice. Didn't get a chance to play it yet but it fires up. Just needs a key for the lock.
Also bringing (or hope to bring) a sea ray, snow derby project, and basketball woodrail.
Looking for an Astro.
Quoted from Jiggly_Martian:Comet Pinball project with extra Playfield, as found, absolutely not tested.
Playfield 1 has loads of wear.
Playfield 2 is decent.
Corkscrew ramp is bad. Million shot ramp has slight cracks.
Cabinet has scratches and chips.
Electronics have slight evidence of alkaline damage.
Power supply included.
Backglass is very Nice.
Asking $875.
Corkscrew ramp and ramp with the flap were recently reproduced and the million shot ramp is currently being produced. https://pinside.com/pinball/forum/topic/freeplay40-ramps/page/43#post-4338723
This has been sold.
Quoted from jkashani:Larry The Lobster mod for AFM new, never used. I do not know if it works for AFMR. $50 and I will bring to Pinfest if prepaid. I will be there on Friday but leaving early, around 2 or so.
https://www.timspinballmods.com/products/attack-from-mars-larry-the-lobster-mod
Quoted from NicoVolta:matesamo is selling one I believe
Yes, thank you. Unfortunately the price is a bit out of my range.
I replaced a bunch of my DMD displays with color. I have a few working ones if anyone is interested. Usually that is something I hold on to but I've got a surplus at the moment and can let a few go.. $85 each and I can bring them to the show if you're interested.
I'm putting color DMD's into some of the games that I'm selling. May have an extra if someone does not want it in the game to save some money..
Also will have about 8 rolls of shrink wrap for $17 each if anyone's looking for that. Brand new. Typically I think they sell for $25.
Quoted from bigd1979:Anyone have a cowpoke in good condition? Looking for a faimly member...
PM me.......
Looking for some Metallica-like gray armor for Stern Machines if anyone has any extra lying around. Legs too.
Hi, I'm looking for some williams em score motor switches .with the big contacts.please pm me.not going to show.would like a couple of stacks.thanks.
Quoted from Guinnesstime:Looking for some Metallica-like gray armor for Stern Machines if anyone has any extra lying around. Legs too.
See the post above yours.
Chris
Hey,delta queen.did you buy or are you selling.i seen one on craigslist 500 no legs.is that the machine.
Quoted from 1974DeltaQueen:Williams Full House, shopped with Strong flippers. 450$
Location?
Quoted from pinballbrian:Hey,delta queen.did you buy or are you selling.i seen one on craigslist 500 no legs.is that the machine.
No, this one is in Connecticut heading to Allentown, has legs.
Quoted from frunch:Location?
My home town of East Hartford , CT is listed on my profile . I assumed most Pinsiders checked out the sellers location . That’s what I normally do. Either way it’s on a trailer heading to Allentown on 5/3.
Sorry my bad.delta.did not look at profile.still a little to learn about navigating the site.i now see your profile.good looking machine.i have no doubt you will sell her.
1 week to go for Playfield Protectors orders to be picked up at the show. - https://pinside.com/pinball/forum/topic/playfield-protectors-pinfest-2018-promo-%e2%80%93-free-shipping-and-discount
I have an original 8-ball backglass in nice but used condition. $200 firm.
I also have some used (not broken) Theatre of Magic ramps if anyone is interested.
Quoted from Butch2099:Also will have about 8 rolls of shrink wrap for $17 each if anyone's looking for that. Brand new. Typically I think they sell for $25.
5 accounted for 3 left
Quoted from SilverUnicorn:PM sent for a display and roll of wrap.
Chris
PM answered
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinfest-2018-buy-sell-trade/page/12?hl=troyster42 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.