Finished up installing the Pinduino Interactive LED kit on my Lord of the Rings.

Addressable LED strips are installed on the apron, backboard and along the inside of the cabinet. The strips on the cabinet are attached to aluminum angle that's held on with Velcro. Using Velcro allows the aluminum angle to be removed if the playfield needs to be raised.

With the Pinduino you can easily customize the programmable LEDs to change color, flash or fade based on J6 or J7 triggers. The possibilities with the Pinduino are endless.

I want to give a huge shout-out to Eric (@lyonsden) for his help in setting this up.

Here's a video of the LEDs in action:

IMG_20171106_202617 (resized).jpg

IMG_20171106_202611 (resized).jpg

IMG_20171106_202557 (resized).jpg

IMG_20171106_202550 (resized).jpg

IMG_20171106_202510 (resized).jpg

IMG_20171106_202431 (resized).jpg

IMG_20171106_202454 (resized).jpg

Thank you Sir. I bought the aluminum angle from Lowe's. They are 1/16" x 1/2" and 3' long. I spray painted the top side black and then cut them to 32" lengths.

Here are pictures with LEDs off.

IMG_20171107_170534 (resized).jpg

IMG_20171107_170641 (resized).jpg

IMG_20171107_170711 (resized).jpg

Eric's cost is pretty close

Thanks! The adhesive from the LED strips is holding up fine so far.