Hi,
I try to use an ati grpahic card with soft 15khz. I add the modline and it works well on the normal lubuntu desktop! I create a file with following commands:
xrandr --newmode "640x480-15khz" 13.218975 640 672 736 840 480 484 490 525 -HSync -VSync interlace
xrandr --addmode DVI-1 "640x480-15khz"
xrandr --output DVI-1 --mode "640x480-15khz"
It works well but not with the pinbox software.
Now the problem is if I start the pinbox software than the software changes the resolution to normal 640x480 60Hz. I don't know how and where I have to set my working modeline as standard value.
Kind regards