Pinbot
Williams, 1986Hi.
There is a std black rubber on the lowest post that supports the upper playfield. Instead it should be the yellow ice cone shaped one that I just bought. However there must also be something else there. I suspect a washer or some sort spacer that sits above the yellow rubber. Or should the rubber just sit by itself on the post ? It sure doesn't look right. Can you guys help please.
Reg
Matt
Hard to see but looks to be a plastic piece on top of the yellow cone. http://www.ipdb.org/showpic.pl?id=1796&picno=21843&zoom=1
Just checked my all-original machine, it's a nylon spacer. I was just at my local Ace Hardware yesterday and they had a drawer full of all sizes of these things, I'm sure you could find one to fit.
Quoted from jibmums:Just checked my all-original machine, it's a nylon spacer. I was just at my local Ace Hardware yesterday and they had a drawer full of all sizes of these things, I'm sure you could find one to fit.
Thanks. Too much to ask if you could shoot a pic ?
Reg
Matt
I'm not 100%, but I believe it's this:
http://www.marcospecialties.com/pinball-parts/03-7973
I found something very close at Menards but had to bore out the hole slightly with a drill to make it fit.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinbot-what-part-is-missing-on-my-game and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Southampton, PA