Pinbot
Williams, 1986You're currently viewing posts by Pinsider Blackbeard.
Click here to go back to viewing the entire thread.
Flashers not working can sometimes be missing ceramic resisters that have fallen off their board.
When I had a pinbot, it came with a lot of missing resistors. They were sitting on the bottom of the cab. Replacing them solved the problem
Quoted from jag8511:I did get the boards back and all the pop bumpers are now working. The game played great until about 3 weeks ago. I never did get the energy flasher lamps to work but I think that is because of the flasher board underneath the playfield. The more important problem is that Column 7 on the light matrix is giving me fits. Not all the green lights on the 25 light matrix in front of the visor will light. Sometimes they will blink or go on and off at random times. The extra ball on the left side of the out lane / in lane do the same. As well as the special insert. Basically, everything in Column 7
Find the wire for column 7 that inserts into the connector on the cpu. Push the wire into the connector. Sounds like it’s not making good contact.
You're currently viewing posts by Pinsider Blackbeard.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinbot-help-please-?tu=Blackbeard and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Fargo, ND