Pinbot
Williams, 1986You're currently viewing posts by Pinsider vulture.
Click here to go back to viewing the entire thread.
Quoted from OrochiLeona:Does Pinbot have lights in the Pop Bumpers? I think they might be out.
Yes, a 44 or 47 in each.
Quoted from OrochiLeona:Left outlane rollover switch *may* not be working. Overuse surely? Pinbots left outlane is the bane of my life.
I had the same problem but with both the left outlane and left inlane switches not working. The contacts were dirty and the switches needed adjusting, and that did the trick.
Congrats on getting it up and running!
Quoted from Blackbeard:I thought they were 555s for replacing, not 47s. You'll know which when you remove the bagatelle and check them. Coulda sworn they are 555s though.
I'll have to check mine too - the pop bumpers have 44s that were in there when I got the machine, so I assumed that was the right bulb. The 44s are working but IIRC the pop bumpers don't have bayonet sockets, so you're probably right it's supposed to have 555s!
You're currently viewing posts by Pinsider vulture.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinbot-first-machine-first-problem?tu=vulture and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Pulaski, PA