I just joined the club and picked up a Pinbot this week! When my visor is activated it will go up then come back down for a second then go back up and is ready for multiball. From looking at clips on YouTube it looks as if it shouldn't go back down but stay up, any ideas?

I noticed there are 4 bulbs under the visor, 2 for the kicks and 2 that pop up towards the back. Are they all 1251? I just put blue and red 89 leds in the ones that pop up and they seem to work. Will i create any harm?

Just trying to confirm if this is where all the 1251s are at. Two under the visor for the left right eject holes, two on the backbox in the middle for eyes and 4 above the playfield c,d,e and f? That would make all the rest 89's? I was trying to get away with not having to wire anything but using the Cointaker 1251 bulbs

I turned my Pinbot on and all the gi lights are on and the backbox but it's not booting or anything on the displays. Can anyone point me to what could be the problem and where to look?

No lights at all on the mpu. What should I check next Robo? Thank you

I've LED'd my whole game but I noticed I missed these 2 bulbs. Does anyone know if they're regular 89 or 63's? If so I can add my regular LED flashers from Comet. I remember there were two right underneath the green marks that were 1251 I believe. I'm just trying to confirm these aren't 1251's? Thanks

pinbot (resized).jpg

Is anyone making reproduction spiral ramps?

Also, I just picked up a 2nd Pinbot and the background music is from Space Station. Could anyone help me as to what ROM I need to switch out? I see there's 2 on the MPU but they're labeled Pinbot and I do get the Pinbot vocal sounds/etc. It's just the background music.

It seems the 2 on the MPU are correct (are labelled correct and make the correct sounds). I'm guessing it's just 1 on the sound card that's wrong?

IMG_3711 (resized).JPG

IMG_3712 (resized).JPG