Pinbot
Williams, 1986You're currently viewing posts by Pinsider Brijam.
Click here to go back to viewing the entire thread.
Ok, I thought LED's took less power than incandescents? I'm replacing my pinbot's backbox incandescents with Comet Twin SMD 2835's and I'm part-way through and suddenly the top half of all the lights aren't working.
Also I replaced the left and right flashers and they are on 100% of the time. In the solenoid test it looks like they're crossed with several things - the knocker and a few others.
What have I done?
Quoted from TheLaw:I think this is normal with sys11. I think you have to remove the resistor or some such thing...anyone?
Is there a cement resistorc around them?
There's a board with several cement resistors where the backbox lights are. Is this what you mean?
Quoted from erak:The eyes in pinbot in the playfield need to be 28v bulbs.
Or you can solider a 330ohm resistor across them. And use #89 LEDs.
Also you need to cut the ground wire off all the resistor boards. For the LEDs to work properly in all system 11 pins.
It seems wierd but just cut the wires labeled ground close to the board. Or desolider them. And it will fix the flashers.
And as far a 1/2 going out. You maybe blew a fuse or are causing a short because of a bad socket that shorts because of the tight fit of LEDs. Compared to incandescent.[quoted image]
Ok that’s excellent. I’ll try out your suggestions, thank you.
You're currently viewing posts by Pinsider Brijam.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinbot-adding-just-one-more-led-to-backbox-turns-em-all-off?tu=Brijam and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Clovis, CA