Congrats on the new pin! Pinbot is a great game and a classic system 11.
You're currently viewing posts by Pinsider lyonsden.
Click here to go back to viewing the entire thread.
Quoted from thedefog:The Flash Bulbs inside the visor ARE NOT #89's. You need to replace them with #1251s. All 4 of them inside the visor area. You can get away with #89's everywhere else though (since all the others are never locked on). I think the manual calls for 1251's in other area though. They'll be brighter, so personal preference there.
This -- 1251 are 28V bulbs: https://www.grainger.com/product/GE-LIGHTING-Miniature-Lamp-1C995
There are six -- four in the visor and two in the backbox (behind Pinbot's face)
I have had luck replacing them with 24V BA15S LED auto bulbs (used for tail lights). Which you can find colored. E.g., ebay.com link: 2X Red 13 SMD 1156 BA15S 1459 P21W R10W 1141 S25 LED Tail signal Lights 24V
Quoted from Insane:i think its eight, 4 in the visor, 2 under the pf under the visor, and 2 in the backbox.
You are correct! I forgot abou the two under the PF.
You're currently viewing posts by Pinsider lyonsden.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinbot-8?tu=lyonsden and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.