Anxious to see the alt version of TFTC...
You're currently viewing posts by Pinsider billy16.
Click here to go back to viewing the entire thread.
Quoted from Tsskinne:ok went and got several printed on nice photostock at staples yesterday and they look great, got home and they were a bit too big and I had to cut off a decent amount of the border artwork to get them to fit......did I screw up? Specficially it was for TFTC eyeball design
I had the same problem with the TFTC cards. They need to be scaled a little smaller as they are not as large as B/W cards--hopefully Aurium will fix this.
Quoted from J_Cutler:When you print the cards. You need to make sure to choose " Do Not Scale" when you print them or have them printed. Then they will print to the correct size.
Jack
I did that. The DE cards are smaller than B/W cards and are not sized appropriately, at least that is my best guess. The CFTBL cards I printed fit like they should.
Quoted from Aurium:That's strange as the cards are sized to the dimensions I've found on the internet and I also own a tftc and mine printed out and are sized fine? I'll have to take a look and double check when I return from holidays
Cool, thanks!
Quoted from brad808:Just to report in that mine also printed too big. So did other reproduction tftc cards though so there may be bad dimensions on the net.
I'm wondering if DE may have used two differently sized TFTC aprons since Aurium got his to fit without cutting. My cards were no where close to fitting, but they would fit into a B/W pin perfectly.
Quoted from RussMyers:DE cards are 5.5" x 3.0"
B/W cards are 6.00" x 3.25"
RM
Thank you for getting these measurements! Aurium, perhaps you can re-size the DE cards now...
Quoted from Aurium:I've updated the Tales cards to the sizing that Russ gave 5.5" x 3.0".
Let me know if they work? I printed out my original versions and they fit fine for my tales so make sure your printer is not scaling the artwork at all when printing..
Much better fit, thanks.
You're currently viewing posts by Pinsider billy16.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinballcardscom-custom-instruction-cards?tu=billy16 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.