Actually, I did that with the BSD ones, and they printed too small. I need to try again scaling them and see if it fits.
I did the do not scale and regular print to compare side by side at least with tftc it made no difference.
Quoted from J_Cutler:When you print the cards. You need to make sure to choose " Do Not Scale" when you print them or have them printed. Then they will print to the correct size.
Jack
I did that. The DE cards are smaller than B/W cards and are not sized appropriately, at least that is my best guess. The CFTBL cards I printed fit like they should.
Donation sent! I now have your cards on 3 out of 4 of my DMD machines!
How about a sweet Lethal Weapon 3 card set?
These look fantastic! I see that Fish Tales in this post but I can't find them on the site. Did I miss them?
Quoted from policano:These look fantastic! I see that Fish Tales in this post but I can't find them on the site. Did I miss them?
There aren't any for FT yet. Just a request for them
These really are great. Donation sent. Could I just point out that the Tron needs to be done with the Tron Legacy theme, not the original. Amazing work! I need to get my Spidey back so I can install these cards.
Quoted from Billy16:I had the same problem with the TFTC cards. They need to be scaled a little smaller as they are not as large as B/W cards--hopefully Aurium will fix this.
That's strange as the cards are sized to the dimensions I've found on the internet and I also own a tftc and mine printed out and are sized fine? I'll have to take a look and double check when I return from holidays
Quoted from Aurium:That's strange as the cards are sized to the dimensions I've found on the internet and I also own a tftc and mine printed out and are sized fine? I'll have to take a look and double check when I return from holidays
Cool, thanks!
Hey guys... Here's another donation request finished for you... 2 versions of Fish Tales and one version has an alternate cover as well. Lots of options
http://www.pinballcards.com/Pinball-Cards/Fish-Tales-V1
Fish-Tales-MAIN-SITE.png
http://www.pinballcards.com/Pinball-Cards/Fish-Tales-V2
Fish-Tales-V2-SITE.png
Quoted from Aurium:Hey guys... Here's another donation request finished for you... 2 versions of Fish Tales and one version has an alternate cover as well. Lots of options
http://www.pinballcards.com/Pinball-Cards/Fish-Tales-V1http://www.pinballcards.com/Pinball-Cards/Fish-Tales-V2
Fish-Tales-MAIN-SITE.png 141 KB
Those FT custom cards look amazing! Great job!Fish-Tales-V2-SITE.png 96 KB
Quoted from Aurium:That's strange as the cards are sized to the dimensions I've found on the internet and I also own a tftc and mine printed out and are sized fine? I'll have to take a look and double check when I return from holidays
Just to report in that mine also printed too big. So did other reproduction tftc cards though so there may be bad dimensions on the net.
been a good week for Fish Tales owners, colorDMD came out with a multicolor ROM for them and now new better cards also.
Quoted from brad808:Just to report in that mine also printed too big. So did other reproduction tftc cards though so there may be bad dimensions on the net.
I'm wondering if DE may have used two differently sized TFTC aprons since Aurium got his to fit without cutting. My cards were no where close to fitting, but they would fit into a B/W pin perfectly.
Quoted from beelzeboob:Hey, Aurium! What kind of donation would you require to do a set for LOTR?
I'm in with beezle, was hoping to see a set before making donations but if it speeds up the process.
Quoted from RussMyers:DE cards are 5.5" x 3.0"
B/W cards are 6.00" x 3.25"
RM
Such basic info that I've needed and never bothered looking up for so long. Thanks!
Quoted from RussMyers:DE cards are 5.5" x 3.0"
B/W cards are 6.00" x 3.25"
RM
Thank you for getting these measurements! Aurium, perhaps you can re-size the DE cards now...
Quoted from Billy16:Thank you for getting these measurements! Aurium, perhaps you can re-size the DE cards now...
I will try to resize the DE cards for you guys... I'm also currently working on the LOTR cards for all you guys waiting for them, should be soonish.
very nice... surprised no one mentioned it yet, but you're a big fan of mondo posters!.... I see a lot of repurposed artwork. http://www.mondoarchive.com/archive/ Which I think is fine, just giving credit where credit is due.
I'm getting my first NIB pin for Tron. So I definitely will try out the tron ones. Big fan of Martin Ansin.
tronarchive_thumb.jpgHuge mondo fan!! I own quite a few, so yes if there's something cool that fits the theme I'll try to add it in there.
Quoted from Xenon75:Classic Bally stuff please!? Love to see what you could do with Embryon, Frontier, Fathom, Medusa, Skateball, Flash Gordon etc.
+1 on this. Some classic Bally cards would be awesome! Everything looks great. Thanks for what you do.
Lord of the Rings cards finally finished!! I know allot of you have been waiting for these so hopefully it was worth the wait
http://www.pinballcards.com/Pinball-Cards/Lord-Of-The-Rings-V1
Lord-Of-The-Rings-V1-MAIN-SITE.png
http://www.pinballcards.com/Pinball-Cards/Lord-Of-The-Rings-V2
Lord-Of-The-Rings-V2-MAIN-SITE.png
Thanks for these. I know you put a lot of time into making these and I hope you are getting donations needed to continue making them for other pins too.
This is only my opinion and maybe best left unsaid but they don't quite fit or look the part for this game. I have donated and will again whether its for these lotr or others. My opinion wasn't asked so I should be flamed for it but at the same time I want to make sure you maximize all you can from your hard and very talented work. I don't want this to be a lost opportunity for many donations because a lotr card is greatly needed.
Ducks, runs and hides.
Quoted from Billy16:Very nice work on LOTR. Please let us know when the TFTC cards are ready to be printed.
There are 3 sets of TFTC available and they look super.
Quoted from Billy16:Very nice work on LOTR. Please let us know when the TFTC cards are ready to be printed.
I've updated the Tales cards to the sizing that Russ gave 5.5" x 3.0".
Let me know if they work? I printed out my original versions and they fit fine for my tales so make sure your printer is not scaling the artwork at all when printing..
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinballcardscom-custom-instruction-cards/page/5 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.