Revenge From Mars
Bally, 1999
Star Wars Episode I
Williams, 1999Hi,
did someone swap the original Pin2k PC for a new PC with VGA graphics card , while keeping the otiginal monitor which is CGA?
I found a lot of information concerning the replacement of the CGA-Monitor to a flatscreen where the GBS-8200 is used.
But I did not find any example of a VGA-PC sending his video to the old CGA-CRT.
Any help would be greatly appreciated.
Thanks
Quoted from jumperger:Hi,
did someone swap the original Pin2k PC for a new PC with VGA graphics card , while keeping the otiginal monitor which is CGA?
I found a lot of information concerning the replacement of the CGA-Monitor to a flatscreen where the GBS-8200 is used.
But I did not find any example of a VGA-PC sending his video to the old CGA-CRT.
Any help would be greatly appreciated.
Thanks
Hey there!
Take a look at the ArcadeVGA card from Ultimarc. Generally it'll swap right into a modern PC but still be able to communicate with lower resolution monitors.
Thanks for the Ultimarc link.
In the Ultimarc shop I found the
BreakOut Cable :
http://www.ultimarc.com/store/section.php?xSec=11
My Pin2k monitor is a Wells Gardner, would this BreakOut Cable do the job for connecting the VGA-PC to the Wells Gardner Monitor?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinball2000-vga-pc-to-cga-monitor and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Luxemburg
Roswell, GA