(Topic ID: 163255)

THE MUNSTERS TOPPER REVIEW, INSTALL, AND OVERVIEW : VIDEO


By wiggy07

3 years ago



Topic Stats

  • 132 posts
  • 25 Pinsiders participating
  • Latest reply 19 hours ago by wiggy07
  • Topic is favorited by 31 Pinsiders

You

Linked Games

Topic Gallery

There have been 235 images uploaded to this topic. (View topic image gallery).

Title (resized).jpg
Topper 3 (resized).jpg
Raven Activated (resized).jpg
Topper (resized).jpg
Overview (resized).jpg
Left Ramp 1 (resized).jpg
Right Ramp 2 (resized).jpg
Ramp Decals (resized).jpg
Iron Maiden Ramp Decals (resized).jpg
Testing Without Translite (resized).jpg
Light Pattern 2 (resized).jpg
Funhouse Motion Marquee (resized).jpg
Light Pattern 1 (resized).jpg
Installed (resized).jpg
Bat Copter Installed (resized).jpg
Board Set Under the Platfield (resized).jpg

There are 132 posts in this topic. You are on page 3 of 3.
#101 11 months ago

Recently I installed toppers onto two of my games in my collection.  Twilight Zone and Iron Maiden had toppers installed that were created by TiltTopper.

Blog Post :
https://pinballsupernova.wordpress.com/2018/12/12/mods-twilight-zone-and-iron-maiden-topper-install-tilttopper-video/

YouTube Post :

12-11-2018 7-46-59 PM (resized).jpg12-11-2018 7-49-12 PM (resized).jpg12-11-2018 7-52-56 PM (resized).jpg
#102 11 months ago

I can't find the Maiden topper on their website. How much is it? I never thought I'd regret a Laseriffic topper purchase before.

#103 11 months ago
Quoted from javagrind888:

I can't find the Maiden topper on their website. How much is it? I never thought I'd regret a Laseriffic topper purchase before.

email TiltTopper and ask about purchasing. Contact info is listed at the bottom of my blog post.

You may have to contact TiltTopper via email to order either topper.
info@tilttopper.com
http://www.tilttopper.com/contact.html

#104 11 months ago

Those are cool - thanks for the video and heads up!

#105 11 months ago
Quoted from Tuna_Delight:

Those are cool - thanks for the video and heads up!

Thanks Tuna for the positive comments.. Much appreciated

#106 11 months ago

Recently I installed two mods created by Vireland from Pinside. Vireland created color filters to change the appearance of the LEDS in the game. The two mods were installed on an Iron Maiden and Metallica pinball machine.

Blog Post :
https://pinballsupernova.wordpress.com/2018/12/16/mods-iron-maiden-and-metallica-color-filters-mod-for-leds-video/

YouTube Post :

111 (resized).jpg222 (resized).jpg333 (resized).jpgColor Filters Mod Home (resized).jpg
2 weeks later
#107 10 months ago

Recently I was able to unbox an Monster Bash LE created by Chicago Gaming.  Monster Bash is an old game created by Williams and was remade by Chicago Gaming.  The game looks great.  All new LEDS, plasma display in the back by the bride toy, new LED Color DMD, topper, and speaker lights just to name a few updated mods to the game.  

Blog Post :
https://pinballsupernova.wordpress.com/2018/12/30/unboxing-chicago-gaming-monster-bash-le-unboxing-artwork-review-and-gameplay-video/

YouTube :

-1 (resized).jpg12 (resized).jpg3 (resized).jpg5 (resized).jpg9 (resized).jpgUnboxing MBR Remake Title (resized).jpg
#108 10 months ago

Recently I installed three mods created by Vireland from Pinside. Vireland created color filters to change the appearance of the LEDS in the game.

Read the entire blog and see the pics below:

Blog Post :
https://pinballsupernova.wordpress.com/2019/01/04/mods-iron-maiden-color-filters-mod-for-leds-part-2-mummy-loop-jackpot-and-eddie-cards-video/

YouTube :

2 (resized).jpg3 (resized).jpgBrackets (resized).jpgIron Maiden Filters part 2 (resized).jpg
#109 10 months ago

WHAT’S IN MY TOOLBOX AND CLOSET : TOOLS USED FOR PINBALL REPAIRS : VIDEO

I get many emails asking what tools are recommended for doing pinball repairs. In this video I cover the tools I use with the repairs, cleaning, and moving of my pinball machines. Also I show how I organize all my pinball parts and supplies within my cabinets and closets. Hope the video helps you in choosing what tools are needed for your toolbox and closet.

Blog Post :
https://pinballsupernova.wordpress.com/2019/01/09/tech-whats-in-my-toolbox-and-closet-tools-used-for-pinball-repairs-video/

YouTube Video :

1111 (resized).jpg1111111 (resized).jpg2222 (resized).jpgTitle (resized).jpg
2 months later
#110 7 months ago

TEXAS PINBALL 2019 FESTIVAL UNVEILS NEW AND PREVIOUSLY RELEASED TITLES : VIDEO WALK – THRU

I will say it was great seeing all my old friends and also meeting new ones this year. The show is not all about playing games. Socializing and talking pinball are some of the other things I do at all shows while attending. Thanks to everyone who brought games to the show for the free play area. I give those people much credit for packing up a machine and letting the public have a go with the game. Without these people, pinball shows would not exist. Thanks again.

Blog Post :
https://pinballsupernova.wordpress.com/2019/03/26/pinball-shows-texas-pinball-2019-festival-unveils-new-and-previously-released-titles/

YouTube Video :

Title (resized).jpg
#112 7 months ago
Quoted from Lermods:

Great seeing you there too!

You too buddy

2 weeks later
#113 7 months ago

In this video we show how 3D printing will help the pinball hobby by producing parts that may no longer be available. I show how to print a FunHouse and Road Show eye link for the animated heads in the game that is no longer available for purchase. We also go over the fundamentals of 3D printing and the printer itself. Parts on my printer have been made by printing 3D elements shared in the 3D printer community.

My Blog post has all the links to the parts that were purchased for the printer and also links to the downloadable files for the pinball and printer parts.

Blog Post :
https://pinballsupernova.wordpress.com/2019/04/10/pinball-tech-introduction-into-3d-printing-printing-pinball-parts-video/

YouTube Video :
https://www.youtube.com/watch?time_continue=82&v=pW6CfbIdzJc

3 Printing Parts Title (resized).jpg
#114 7 months ago

In this video, we review the game play and specs of the old Coleco mini arcade games compared to the present models created by companies such as New Wave Toys and also NumSkull Designs. I have in my collection five of the Coleco games which were purchased when I was a child. All the games in my collection are still working which is amazing. Most of the Coleco branded games were created back in 1981 during the arcade boom.

Check out the blog post for more pics and the instruction manual to each of the Coleco games created in the early 80's.

Blog Post :
https://pinballsupernova.wordpress.com/2019/04/14/pinball-related-gameplay-and-review-of-mini-arcade-games-1981-2019/

YouTube Video :

1 (resized).jpg22 (resized).jpgMini Arcade Title Page (resized).jpg
#115 6 months ago

STERN BATMAN 66 AND IRON MAIDEN TOPPERS : REVIEW AND INSTALL : VIDEO

Recently I installed the Batman 66 and Iron Maiden toppers on my games. The two toppers look great and were easy to install. The Batman 66 topper seems like it is just a lit up topper with no interaction with the game. The Iron Maiden topper seems like it interacts with certain modes in the game by lighting up certain parts of the topper.

Batman 66 topper is designed around the criminals of the game. The artwork seems like it is copied from the play field to the topper. The characters are at the forefront of the topper where a cityscape is towards the back. The batman logo is also in the center of the topper. LED strip lights cover the front and middle to illuminate the characters on the topper.

The Iron Maiden topper is designed more towards the LE pinball machine. The topper has Eddy flying a fighter plane that resembles the artwork on the sides of the LE cabinet. The cockpit, guns, and back drop all light up on the topper during certain modes.

Blog Post :
https://pinballsupernova.wordpress.com/2019/04/20/mod-install-stern-batman-66-and-iron-maiden-toppers-review-and-install-video/

YouTube Video :

1 (resized).jpg2 (resized).jpgIron Maiden and Batman 66 Title (resized).jpg
#116 6 months ago

REPLACING VERTICAL UP-KICK IN MONSTER BASH AND TWILIGHT ZONE : VIDEO

In this video we will show how to replace a VUK in a Monster Bash and Twilight Zone pinball machine. The VUKs were purchased from Mantis Pinball. Mantis Pinball makes many different VUKs and protectors for the 80’s and 90’s Williams pinball machines.

Blog Post :
https://pinballsupernova.wordpress.com/2019/04/25/repairs-video-replacing-vertical-up-kick-in-monster-bash-and-twilight-zone-video/

YouTube Video :

3 (resized).jpgTZ Upkick (resized).jpgVuk Title (resized).jpg

1 (resized).jpg
1 week later
#117 6 months ago

In this video, we look at my RFM with Pinbox installed. We look at the topper, lenticular translite, topper, and shooter button mod. We also try to figure out why Fuse 109 keeps blowing when playing the game. Fuse 109 controls some of the flashers on the playfield in the game. Also I show a makeshift fuse that you can reset instead of wasting regular fuses when trying to figure out the flasher issue.

Blog Post :
https://pinballsupernova.wordpress.com/2019/05/02/repairs-video-overview-of-revenge-from-mars-issue-with-fuse-109-flashers-not-working-video/

YouTube Video :

$R9RFXW0 (resized).jpg$RBNWNYU (resized).jpg$RRO1Q9B (resized).jpg
#118 6 months ago

PINBALL SHOW : PINFEST 2019 WALKTHRU : ALLENTOWN PENNSYLVANIA

Pinfest 2019 has come and gone once again. Another great show and with some great games to be played. Only two new titles were released and present at the show this year (Willy Wonka and Stern’s Black Knight). Thanks to the great pinball distributors for bringing the new games and allowing them to be played.

This year, many people attended the show. The line to get in wrapped around the parking lot like a serpent. It seemed like more people than other past years either because the crowd was larger and more people are getting into the hobby or because the facility only had one ticket booth open compared to prior years that had two taking your $20 cash only at the door. Maybe in upcoming years the organizers may want to take pre-sales on the Internet for ticket purchasing to the show.

Blog Post :
https://pinballsupernova.wordpress.com/2019/05/04/pinball-show-pinfest-2019-walkthru-allentown-pennsylvania/

YouTube Video :

Pinfest 2019 Title (resized).jpg
#119 6 months ago

Recently I went to my friend Julius’s home to play his linked Bally NBA Fast Break pinball machines. The two games are linked by a cable that allows simultaneous head 2 head game play between two opponents.

Blog Post :
https://pinballsupernova.wordpress.com/2019/05/06/pinball-tech-ballys-linked-nba-fast-break-pinball-machines-overview-and-gameplay-video/

YouTube Video :

Image 1 (resized).jpgImage 2 (resized).jpgTitle (resized).jpg
#120 6 months ago

PINBALL MONK’S IRON MAIDEN 3D ANUBIS FIGURE INSTALL : VIDEO

Blog Post :
https://pinballsupernova.wordpress.com/2019/05/10/mods-pinball-monks-iron-maiden-3d-anubis-figure-install-video/

YouTube Video :

2 (resized).jpg5 (resized).jpg9 (resized).jpgTitle Page Anubis Mod (resized).jpg
1 week later
#121 5 months ago

PINBALL TECH : TWILIGHT ZONE RIGHT UPPER FLIPPER FLASHER LOCKED ON : VIDEO REPAIR

While playing my Twilight Zone pinball machine the other day, I noticed some smoke starting to come from the playfield. I quickly turned off the machine and removed the glass. First thing I can notice is that the plastic right above the right upper flipper looked melted. Looking more closely at that area, I was able to see a burn mark in the plastic and figured a bulb had locked on underneath causing the damage.

Blog Post :
https://pinballsupernova.wordpress.com/2019/05/21/pinball-tech-twilight-zone-right-upper-flipper-flasher-locked-on-video-repair/

YouTube Video :

2 (resized).jpg3 (resized).jpgTitle (resized).jpg
1 month later
#122 4 months ago

This video highlights the pinball mod making company Mezel Mods. I give an overview and an install explanation of the mods that I own for my games. The games that I cover in the video are Attack From Mars, Iron Maiden, and Twilight Zone.

Twilight Zone : Lighted Court House

Attack From Mars : Eat at Eddy's Lighted Hotel

Iron Maiden : Egyptian Archway, Obelisk Dome Cover, Pinball Torches

Blog Post :
https://pinballsupernova.wordpress.com/2019/07/11/mods-install-and-overview-of-mezel-mods-mods-afm-tz-and-iron-maiden-spotlight-mod-tz-lighted-courthouse-video-install/

YouTube Video :

1 (resized).jpg2 (resized).jpg3 (resized).jpg4 (resized).jpg6 (resized).jpg
#123 3 months ago

In this video we show how to install a FunHouse topper created by Pedretti Gaming. The topper was purchased from Ministry of Pinball who is one of the distributors for the Pedretti Gaming Company.

Blog Post :
https://pinballsupernova.wordpress.com/2019/07/17/mods-funhouse-topper-install-review-and-overview-pedretti-gamings-fun-house-topper-video-install/

YouTube Video :

1 (resized).jpg5 (resized).jpgFunhouse Title (resized).jpg
1 week later
#124 3 months ago

The inaugural issue features an interview with Wayne Neyens, game reviews (Gottlieb’s Mystic Marvel, Williams’ Space Pilot), E.M. Tech (Relays), a product review, Comics, and more!

Illustrations by Ryan Claytor with articles written by Nick Baldridge and Ryan Claytor.

Coin-Op Carnival #1 is 64-pages in length, measures 5.5″ x 8.5″, and features full-color illustrations on every page.

Price is $15 plus shipping

In this video, we do an overview of a book created by Ryan Claytor and Nick Baldridge called Coin-Op Carnival #1. This is the first book in a four part series from the duo. The book focuses on the workings of electro-mechanical pinball machines and also contains a great interview with Wayne Neyens of Gottlieb fame. Wayne worked with Gottlieb for years creating over 150 machines. Presently, Wayne is at the young age of 100 years old.

Blog Post :
https://pinballsupernova.wordpress.com/2019/07/24/review-ryan-claytor-and-nick-baldridge-coin-op-carnival-1-book-review-video/

YouTube Video :

1 (resized).jpg4 (resized).jpgTitle (resized).jpg
1 month later
#125 74 days ago

I had the pleasure to take a look at the new 3d hologram topper created by Lighted Pinball Mods. The topper allows you to install photos and videos on a micro SD card to view through the hardware. The topper actually projects the images which gives the illusion of a hologram above your pinball machine.

Blog Post :
https://pinballsupernova.wordpress.com/2019/08/30/mods-lighted-pinball-mods-3d-hologram-topper-overview-and-install-video/

YouTube Video :
https://www.youtube.com/watch?time_continue=1970&v=TNBdwE1Ol7E

111 (resized).jpg4444 (resized).jpg8-29-2019 9-13-32 PM (resized).jpg8-29-2019 9-21-28 PM (resized).jpgTitle For Video (resized).jpg
#126 72 days ago

Yesterday I posted a video showing off Lighted Pinball Mods new 3D hologram topper. In this video I am going to demonstrate how to create custom videos for the topper and also show off the results.

Blog Post :
https://pinballsupernova.wordpress.com/2019/09/01/mods-tutorial-on-creating-custom-video-for-lpm-3d-hologram-pinball-topper-video/

YouTube Video :

1111 (resized).jpg2222 (resized).jpg3333 (resized).jpg4444 (resized).jpgTitle (resized).jpg
3 weeks later
#127 50 days ago

INSTALLING PINSTADIUM AND HOVERS INTO AN STERN STAR WARS PREMIUM

Recently I installed Pinstadium’s new product into my Star Wars Prem pinball machine. The product is called Hovers and is a new type of mounting system for the Pinstadium pinball cabinet lighting system.

Blog Post :
https://pinballsupernova.wordpress.com/2019/09/24/mods-installing-pinstadium-and-hovers-into-an-stern-star-wars-premium-video/

YouTube Video :

2222 (resized).jpg3333 (resized).jpg5555 (resized).jpgTitle (resized).jpg
2 weeks later
#128 32 days ago

In this video we do an overview and install with two new mods.

Art of Pinball’s Twilight Zone clock cover

PinBoss Revenge From Mars flipper cap

Blog Post :
https://pinballsupernova.wordpress.com/2019/10/11/mods-art-of-pinballs-twilight-zone-clock-cover-pinboss-revenge-from-mars-flipper-cap/

YouTube Video :

Art of Pinball TZ Clock Cover (resized).jpgPinboss RFM Flipper Cap (resized).jpgTitle (resized).jpg
#129 27 days ago

I recently installed a new mod on my Batman 66 pinball machine. The mod is created by a user on Pinside named Big Law. The mod is a working Bat Copter that has a functioning propeller and also a lighted landing pad underneath. The mod looks great and works well with the game.

Blog Post :
https://pinballsupernova.wordpress.com/2019/10/16/mods-spinning-propeller-bat-copter-mod-review-and-install-batman-66-video/

YouTube :

Bat Copter Installed (resized).jpgBoard Set Under the Platfield (resized).jpgOverview of Bat Copter (resized).jpgTitle (resized).jpg
3 weeks later
#130 6 days ago

I recently installed a new mod into my Fun House pinball machine. The mod which is called Fun House Motion Marquee is created by a pinball company named Arcade Upkeep. The mod version showcased in this video is called the M3X Deluxe Board which is the more expensive model.

To order the mod and see more of the story and pictures of the install please click on the blog post link below :

Blog Post:
https://pinballsupernova.wordpress.com/2019/11/07/mods-fun-house-motion-marquee-mod-review-and-install-fun-house-pinball-video/

YouTube Video :

Funhouse Motion Marquee (resized).jpgInstalled (resized).jpgLight Pattern 1 (resized).jpgLight Pattern 2 (resized).jpgTesting Without Translite (resized).jpg
#131 4 days ago

I recently installed the Iron Maiden ramp decals created by Tilt Graphics. The decal installation went fairly easy after negotiating the curves and imperfections of the ramps.

The decal material is made of the heavy vinyl that is used for the game blades that can be purchased from Tilt Graphics as well. The graphics and theme of the decals really fit into the Iron Maiden pinball world. Tilt Graphics makes great products for the pinball community.

Blog Post :
https://pinballsupernova.wordpress.com/2019/11/07/mods-tilt-graphics-iron-maiden-ramp-decals-overview-and-review-video/

YouTube Post :

Iron Maiden Ramp Decals (resized).jpgLeft Ramp 1 (resized).jpgOverview (resized).jpgRamp Decals (resized).jpgRight Ramp 2 (resized).jpg
#132 19 hours ago

In this video we review and install Stern’s The Munsters pinball topper. The topper that is showcased in the video was installed on The Munsters LE pinball machine owned by my friend Ed.

Blog Post :
https://pinballsupernova.wordpress.com/2019/11/12/mods-sterns-the-munsters-pinball-topper-review-install-and-overview-video/

YouTube Video :

Raven Activated (resized).jpgTitle (resized).jpgTopper (resized).jpgTopper 3 (resized).jpg
Promoted items from the Pinside Marketplace
9,700 (Firm)
Machine - For Sale
Alpharetta, GA
$ 48.00
Playfield - Other
ModFather Pinball Mods
There are 132 posts in this topic. You are on page 3 of 3.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside