Joined the club yesterday.

Is my first capcom. Seller even had a box full of spares taken from a populated playfield which hangs on the wall.

Curious to explore the technique of a capcom. Am out of space is a bit of an issue however …. Known problem among us

Looks like a nice example. Owner had it like 15 years.

0AE8E4D9-82D4-4C0F-94BB-6286ABB158D4 (resized).jpeg

59F41EAA-74F6-4EE4-BFF8-BBECE50C505E (resized).jpeg

74714892-89F1-4FFE-AAFC-E1318111CBD3 (resized).jpeg

7EDEF12E-3882-415B-9F16-26627A2F7E79 (resized).jpeg

7F076634-30AC-4FFC-8C3F-5FDD17DFC11B (resized).jpeg

D2657345-A37B-42E6-A23E-EF07240F884A (resized).jpeg

E242B4D2-9927-4355-8960-5A21B48C6D96 (resized).jpeg

Had to take off the backbox to get it down to ground floor. What I already noticed during breakdown is that one yellow wire appears to be broken. It runs on one side to the top right corner of the pcb in the right top corner.

Can it be that this wire is broken on purpose? Do t guess so but just checking.

Also I heard something about Groundwire issues with Capcom. Any advice on this ? Thanks in advance.

4E55AA6B-C374-4895-B88C-018D10373FF5 (resized).jpeg

59904145-CF32-421E-A1DA-725FF01205AB (resized).jpeg

Fixed the wiring and everything worked fine. Thanks for the advise.

Now up to a full tear down. Man, getting to the back of the playfield ain’t easy with a Capcom. Am I missing something or is it just a PITA?

F78657D8-2EE5-476C-9FDC-6B11B48FDED2 (resized).jpeg

Wow. Great advice. Thanks.

The video does show a different end position and the picture of the law but think from video position to the law picture is just a matter of lifting the back of the playfield.

Gonna try this out for sure. Am after all only half way.

Thanks again guys !!

Can anybody have a look how this plastic is mounted pls?

The plastic is lifted at that position. Looks like it should be a standup post without thread on top below the plastic left of the scoop.

Thanks.

62581A1E-F55E-48EC-84EB-4124A29FBCAB (resized).jpeg

65B5FC75-2DF8-4ABD-A21D-8FF193FDF70E (resized).jpeg

F818641B-A31F-4423-9BDC-855031C12708 (resized).jpeg

Thanks for all the advice guys.

I ended up on just removing with a dremel the threaded part and making it a flat top. This as I had no post fitting in that spot. They are different (thinner) as BW type.

Now the hat is also in a better position to be able to finally make the skill shot. With the plastic tilted it was impossible.