Shinglehouse, PA
Quoted from bobukcat:That's good to know, glad I put some question marks on my comment about it being sold out!
They sold fast or the page had it marked wrong. No page now.
(Topic ID: 123301)
Linked Games
Pinball Magic
Capcom, 1995
Topic Gallery
Quoted from PinballManiac40:How has your game been doing for you? Did you get it all dialed in?
Everything is working great except the kicker in the stage area. It's a switch adjustment i'm 99% sure, but just haven't gotten it yet.
Chris
Quoted from SilverUnicorn:Everything is working great except the kicker in the stage area. It's a switch adjustment i'm 99% sure, but just haven't gotten it yet.
Chris
I am glad you are able to play it. I am hoping for a broken wire on or to that coil.
Quoted from Madal:Only good if your in the US ! Last time I ask about this I was told thay do not ship overseas ! @#$/&&*$$# !
I keep my cash
I wonder if its a power box issue??
One of us could mail one to you, I'd be willing to do it.
Brisbane City
Quoted from Ericpinballfan:I wonder if its a power box issue??
One of us could mail one to you, I'd be willing to do it.
240v in and them step down to the same voltage
As yours.
Most likely its the shipping costs! Sending over all that water to get to Australia.
Bayside was the same $16us for the pinball magic black hat $90us shipping. Thats a kick in balls I pass on !
Maybe Someone posting it out be the way go.
I put a call out after a few projects done.
Quoted from Madal:240v in and them step down to the same voltage
As yours.
Most likely its the shipping costs! Sending over all that water to get to Australia.
Bayside was the same $16us for the pinball magic black hat $90us shipping. Thats a kick in balls I pass on !
Maybe Someone posting it out be the way go.
I put a call out after a few projects done.
Mate of mine is in Canberra. I ship to him twice a year. I have one part for him now. Waiting on a few more. Will talk in weeks to come. I just shipped an Fathom apron to him few months back. Had some extra's in box.
Cost , $68 usd
Love Pinball Magic. Going to add OCD board. Check out Mezel Mods has a gorgeous treasure chest replacement.
I made a video that details all the tricks. You guys probably know all this but new owners might appreciate the details. Sorry about the slight angle of the video. I had to clamp my iPhone to a stand in front and above me, and I needed it to be to the left a little so I could see the playfield.
Quoted from guss:They sold fast or the page had it marked wrong. No page now.
No, they don't sell nearly that fast. 
I'm guessing you may have clicked on the link within a quote. Pinside messes up the links within quotes by replacing ampersands.
http://ledocd.com/cart/index.php?main_page=product_info&cPath=1&products_id=21
Edmonton, AB
WOOOHOOO .... Colordmd just announced Game 86 is Pinball Magic!
I was fortunate enough to beta test this game .... it's incredible what they managed to do with this game!
please order one as soon as it is available.
I'm on an LCD Colordmd if anyone requires help installing the LCD version feel free to PM me
Regards
Rob
Quoted from transprtr4u:WOOOHOOO .... Colordmd just announced Game 86 is Pinball Magic!
I was fortunate enough to beta test this game .... it's incredible what they managed to do with this game!
please order one as soon as it is available.
I'm on an LCD Colordmd if anyone requires help installing the LCD version feel free to PM me
Regards
Rob
It looks like they are only offering LED... Is that correct?
Quoted from drypaint:It looks like they are only offering LED... Is that correct?
Well as of today. But, LCD will be coming soon!!
Promise, ummm. Lets just say I know this first hand.
Special props to Dave Timmer and his dedication coloring PM. Also to the beta testers.
Quoted from Ericpinballfan:Well as of today. But, LCD will be coming soon!!
Promise, ummm. Lets just say I know this first hand.
Special props to Dave Timmer and his dedication coloring PM. Also to the beta testers.
Well... I'm just too impatient and excited. I ordered the LED anyway. I have all LCD's, so this will be my first, but not only LED at The Flipper Room. WH2O and Star Wars Data East each have a color LED.
Thanks Color DMD and all of you testers out there.
I was very happy to have beta tested this game. I had my Sigma display installed for 2 years waiting for this to happen.
can someone please help if i currently have a color led dmd can i swap it into this
im trying to understand the connection issue
under the instal instructions it states to get power from J2
5v 18v ground
i was of the understanding that when i get power from BW boards im pulling 12v 5v ground from the power driver board
what am i missing
thanks
Quoted from john17a:swap it into this
im trying to understand the connection issue
I would purchase the power tap from colordmd ,check the site and see if its available ?
Quoted from transprtr4u:I would purchase the power tap from colordmd ,check the site and see if its available ?
Postage to Australia is ridiculous for a cable $19 US cable $58.60 postage total $77.60 US = about $110 AUD
I received the Pinball Magic Color DMD, but the firmware is not posted yet... so no color?!? When should we expect it?
Thanks.
Quoted from drypaint:I received the Pinball Magic Color DMD, but the firmware is not posted yet... so no color?!? When should we expect it?
Thanks.
Expected to be posted Friday, as per the announcement.
Quoted from PinballManiac40:Expected to be posted Friday, as per the announcement.
Not posted yet 
Quoted from PinballManiac40:It is definitely there now. 9:30 CST
I can't find it. I see BBB and everything else. It says coming soon?
Quoted from guss:I can't find it. I see BBB and everything else. It says coming soon?
Click on "support" above the "coming soon". It will take you to the firmware page. It's in the list.
Quoted from drypaint:Click on "support" above the "coming soon". It will take you to the firmware page. It's in the list.
I did 20 times and it's not there.
Quoted from guss:Finally COLOR
you just need Breakshot and I need Airbourne .....
Hey guys my red flasher at the back isn’t working. I’ve changed the bulb and socket with no luck. I unplugged connector from below the bulb and even stuck bulb wires in there to see if it would flash. No luck. There’s a second bulb on the backbox that flashes with the test (Solenoid 24/J21 on the driver board) so I’m wondering does that mean the power flow is good from the board? My j20 and j21 connectors are swapped compared with the manual but I’m guessing they’re both the same and it doesn’t matter? Any help would be great.
Evening everyone,
I'm in need of some help
Working on a PM and cant seem to get the red geo dome light to work according to the manual its light 29 but that is for the spinner after chasing wires i believe its light 24 for the wand If that is correct can anyone tel me how i go about testing the light ?
I know the bulb and socket are good i swapped them with the green geo dome light.
ANy help is greatly appreciated.
Thanks
Bruce
pasted_image (resized).pngQuoted from DMC:Hey guys my red flasher at the back isn’t working. I’ve changed the bulb and socket with no luck. I unplugged connector from below the bulb and even stuck bulb wires in there to see if it would flash. No luck. There’s a second bulb on the backbox that flashes with the test (Solenoid 24/J21 on the driver board) so I’m wondering does that mean the power flow is good from the board? My j20 and j21 connectors are swapped compared with the manual but I’m guessing they’re both the same and it doesn’t matter? Any help would be great.
[quoted image]
There both the same.
1, is for the back box flashers and the second for the playfeld flasher
Just push that wire in to that shity plug a bit more !
Quoted from bigfoot53:Evening everyone,
I'm in need of some help
Working on a PM and cant seem to get the red geo dome light to work according to the manual its light 29 but that is for the spinner after chasing wires i believe its light 24 for the wand If that is correct can anyone tel me how i go about testing the light ?
I know the bulb and socket are good i swapped them with the green geo dome light.
ANy help is greatly appreciated.
Thanks
Bruce
[quoted image]
I had the same problem.
Its S24 on solenoid test, check for lose wire on the bottom of plug at J20 or J21
Just got my Mezelmods trunk.
Very well made and looks great.
Its a very tight fit, no screw hole & not needed with that tight fit.
The trunk comes with matching decal, I just have not added it.
20190318_225913 (resized).jpg20190318_225841 (resized).jpg20190318_230451 (resized).jpg20190318_233730 (resized).jpg
Quoted from Madal:Just got my Mezelmods trunk.
Very well made and looks great.
Its a very tight fit, no screw hole & not needed with that tight fit.
[quoted image][quoted image][quoted image][quoted image]
It does look great but they need to include a decal for the door, the NOS one isn't even close to matching.
Quoted from Madal:I had the same problem.
Its S24 on solenoid test, check for lose wire on the bottom of plug at J20 or J21
That was it re-punched the J21 connector and it's flashing away
Thanks for the help.
Bruce
Quoted from bobukcat:It does look great but they need to include a decal for the door, the NOS one isn't even close to matching.
Hmmm, Friend of mine just ordered on of those when it gets here ill have to see about making a decal for it
Bruce
Quoted from bigfoot53:Hmmm, Friend of mine just ordered on of those when it gets here ill have to see about making a decal for it
Bruce
It comes with a sticker, but I think it's the one shown in that picture. As stated, it doesn't match though.
Quoted from Madal:Just got my Mezelmods trunk.
Not at all fan of the Mezelmod stuff with the print lines from the 3D printer.
Without them, it would have looked good.
Quoted from Axl:Not at all fan of the Mezelmod stuff with the print lines from the 3D printer.
Without them, it would have looked good.
To what I had it's 100% improvement to not having a trunk at all.
It looks and seems stong.
If thay gave a little more sanding those line may not be there and with the more work there be more cost.
I happy with it. I dont wont to be paying a too much more for a plastic box.
Quoted from Madal:To what I had it's 100% improvement to not having a trunk at all.
It looks and seems stong.
If thay gave a little more sending those line may not be there and with the more work there be more cost.
I happy with it. I dont wont to be paying a too much more for a plastic box.
Looks better than the original and what are your options with some of these games
Quoted from bigfoot53:That was it re-punched the J21 connector and it's flashing away
Thanks for the help.
Bruce
Same for me too. A few hours of troubleshooting at the flasher end. But just repunched the connector as well and all fixed.
Quoted from DMC:Same for me too. A few hours of troubleshooting at the flasher end. But just repunched the connector as well and all fixed.
I think that wire may get a bit of tension when lifting the playfeld. ?
Quoted from Madal:Thanks.
I see someone in Brisbane if thay can do a set if not Marco be the way.
Has any one got some playfeld parts?
In need of Ball Guide/Bottom Arch left PN: MT00186-L
I have a piece of card board doing the job[quoted image]
(Found a replacement thanks to a member on here)
Quoted from Milk:of some parts for my PM
Try PSPA....they have a lot of Capcom parts ...
Pinball Spare Parts Australia
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
