High Roller Casino
Stern, 2001Hey guys,
I have a High Roller Casino and most of the time when I launch the ball with the plunger, the ball wants to move towards the left and it ends up hitting the wire ramps, thus affecting the ball going into the roulette wheel properly.
Is there any adjustment so that the ball can launch a little more to the right or straight?
Any help or advice would be appreciated!
Thanks,
Jason
Manual plunger? You can move whole assembly to the right. If you lift playfield there are 3 screws that hold metal plate on, should be Phillips head. Just loosen them enough to shift it to the right & you should be able to tell if tip of shooter rod is centered with the ball. J
Quoted from Yoeddy:I launch the ball with the plunger, the ball wants to move towards the left and it ends up hitting the wire ramps
I also have this game and anytime you have the play field raised then lowering it back down, you need to make sure that the plunger is centered. There is just enough wiggle room from left to right to throw the ball off either way. I added a couple of pictures for an example, it’s worth a shot before you spend any money.
5721E443-A512-4689-8991-EECB1E507D55 (resized).jpegE35DEC61-1D4E-4DD8-A4F3-B4912A7BE3C2 (resized).jpegWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinball-launch-adjustment and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Boise, ID