Hello

Already thank you for your help before I made good progress on my williams fan-tas-tic pinball machine,

I still need your help after cleaning and adjusting all contacts I have the following problem

When I throw the pinball machine I credit a game the player plays and when losing the ball and it is ejecting the pinball machine this my tilting?

If I block the contact as in the photo it works

I tried with the Scor motor also blocked contact and it works

Do you know what this can come from?

I also gave you photos of the ball count unit ect

Can you tell me if contacts are in their right place?

Sorry for this translation

And as you understood, I’m a beginner white belt

Thanks to you

652AC976-5A89-40C1-B651-C00E08D6DA4C (resized).jpeg

66A95C50-A327-4927-9E55-A070746B4F9D (resized).jpeg

9A7372F9-8DA0-4C56-BEA5-7C7520C7D3F3 (resized).jpeg

B3DB2D32-DAD9-4448-BABC-9A85557FC558 (resized).jpeg

FB52FFBB-FAD3-48DF-85E3-BCB28DED2F3A (resized).jpeg

Thank you

But I can’t find the breakdown I set all the pinball contacts turned off clean the entire Scor motor but I don’t see any contact that’s not in that place

Do you think the pinball machine had to be turned on to adjust the contacts?

Thank you for your help and sorry for the translation I am French

Hello

I checked and again checked all the contacts in the manual looked at tilt relay and outhole relay everything is fine

Before this tilt I cleaned the contacts of the scor motor now I'm almost sure I don't see well on paper and IPBD the difference in open and closed is minimal

Can you confirm the opening and closing of contacts as in the photo?

Thank you very much, it will get me out of this impasse

EBBF464B-95C4-49DA-904C-AEF028C256F4 (resized).jpeg