Series 18v
You're currently viewing posts by Pinsider asay.
Click here to go back to viewing the entire thread.
Quoted from Star_Gazer:How do you know the right direction the current flows with these Lamps (resistors) ?
Lamps_04.jpg (Click image to enlarge)
I'm pretty sure resistors/lamps aren't directional. However for LED's polarity does matter because they are diodes.
Quoted from Star_Gazer:But a resistor works only one way right? Or isn't a light not really an resistor?
An LED is a light emitting DIODE, and polarity matters on diodes because they only allow the flow of current in a single direction.
Incandescent bulbs are basically resistors, because a filament is just a coil of wire. And resistors are basically just (calculated) coils of wire too.
Quoted from urbanledge:Yes. This is correct but either way the voltage doesn't change.
I think the graphics were meant to show that if you wired the bulbs in series, you would need an 18v power source for 3 6v bulbs.
Quoted from Andy_B:OP I don't want to rain on your parade but you are a person who has "trouble understanding that electricity stuff" yet you want to provide a guide for people who also have trouble understanding that electricity stuff too? And inviting comments/suggestions from other members of the group some of whom clearly have a little trouble understanding that electricity stuff too???
It's gonna be a long road.....
Andy
I think you misunderstood OP's intention.
He said he is more of a visual learner, so the images he is making are questions that he is posing to learn for himself. Not to teach people (until the question is answered correctly I guess).
Quoted from robertmee:Diodes are an important component of bridge rectifiers, which are used to convert all Pinball machines incoming AC voltage to useful DC voltages.
You're currently viewing posts by Pinsider asay.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinball-electricity-for-dummies?tu=asay and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.