Hey all,

Really excited as I just joined the club! Bought a HUO Standard version from my buddy, and can't wait to start playing.

However, as we were getting it packed up for transport, I had a small issue. As I lowered the head, the LH side cable group snagged on the back of the playfield, and pulled all the connections out.

The HDMI is easy enough to tell, but there were 3 USB connectors that came loose. Unfortunately, the cables and connectors aren't labeled, so I have no idea where they go.

I've included a couple pics. Anyone able to help me figure out which one plugs in where?

Thanks,
EV

20211212_222010 (resized).jpg

20211212_222021 (resized).jpg

All 3 cable ends are white inside.

Sources down in the cab different? I suppose I could trace each cable back to its origin and check if the female source end is black or blue...

Thanks,
EV

And just going to random USB ports won't screw anything up? Concerned about frying something....

Thanks,
EV

So is the top picture the source unit down in the cabinet?

If so, am I reading that right in that "USB - IN1" goes to "USB 1" in the head, "USB - IN2" goes to "USB 2" and so on?

Thanks,
EV

Well, traced the cables back and hooked them up as above and got this....

Thoughts?

Thanks,
EV

20211213_212402 (resized).jpg

Ooops! Turns out I was reading the picture wrong. The backbox unit is upside-down from the schematic picture. So, once I transposed the positions and swapped the USB cables to the correct spots, everything works fine.

Appreciate the help on here!

Thanks,
EV