PM sent
You're currently viewing posts by Pinsider kkoss24.
Click here to go back to viewing the entire thread.
Man I’m glad the list stalled 30-40 days back .I just had the time to read the whole thread .Talk about excitement ! The license issue had to be such a bummer to only do a 180 to an eruption of joy ! I myself had a series of events happen where I ended up with a deposit down on a LV. Incredible job the team is doing for sure .Not to put anyone down who spends they’re time making mods for this hobby but I challenge anyone to come up with one out there that will change the game as much as this one .I even tried to get Marc to make a version for IMDN and MET lmao .Sorry guys I tried .
Quoted from digitaldocc:I may have an alien by end of day today. Is it to late to get on your list and join the party?
Do you have a standard or LV coming ?just curious .
I’ve been looking for the video clip of the light show in action with it set in and focusing on the apron lights only .Can’t find in here or on Youtube .Please help lmao
Quoted from ezeltmann:thisone?
No I was looking for the one that showed a behind view with the strobes and multi ball effects .Thank you though
Quoted from Baggerman:it is on this ones you tube page.. he has other videos. Dig a bit.
Time is a hot commodity lately but finally found it on post 345
Now I just hope the July date comes through for delivery .From what I heard ,Alien is one of the most immersive pins out there and this apron will take it over the top from what I’m seeing
Quoted from Baggerman:Container from Italy departs this week.. so 3 week travel time so yeah July looks about right. Full container too from what i understand both SV and LV onboard. Lots of happy peeps in July i think!
That’s music to my ears , thank you buddy .
I was just wondering how many different lighting effects does the apron have and is there any possibility we can get a updated “sneak peak” at one we have not seen yet ?Other than that thanks Marc and to you and all the people in this thread “Happy 4th if July weekend !” Cheers
<blockquote
Quoted from Zablon:Is there any strobe effect implemented in the game? How does it look?
Post 345 captures the moment
Quoted from Red_Devils:Ok guys we're on the home stretch now. We have a small production batch on the way and should be here by the end of next week or earlier. we will then make an installation video and contact the first people on the list to submit final payment before shipping. The balance of the aprons will be coming on 2 pallets all are almost boxed and ready to go.
You guys are going to be so happy once you receive these.
[quoted image][quoted image][quoted image]
Thank You
I was told today that our Alien LV should arrive home in the next week or two Tracker mod is sitting at the post office as nobody was home to accept but I will jog my way there tomorrow and now the biggest news of all that the mod of the year is coming around the turn Good times on the horizon .
B6B95278-0549-44DB-A440-26CEE97D648D (resized).jpegQuoted from kciaccio:It has arrived. Excellent quality![quoted image]
Great to see it bud
Quoted from kciaccio:Apron comes with the tag for original Alien ship.
I am putting tag on the coin door for Alien's Sulaco.
[quoted image]
[quoted image]
Very nice .I can’t wait to get this pin here .Shoukd start shipping any day now .
Quoted from Zablon:What is the round chamber in the middle?
Mine is 80% installed. Mostly straight forward so far. Had to stop for work.
Quoted from Zablon:What is the round chamber in the middle?
Mine is 80% installed. Mostly straight forward so far. Had to stop for work.
That’s a pic of @Mageek’s pin
Quoted from Zablon:[quoted image][quoted image][quoted image]
https://drive.google.com/file/d/1vyzanXRYTUYHG11gLo9pGgq5b5mE7vmb/view?usp=sharing
Bless you Zablon .A little on the short side though
Quoted from Zablon:What do you want to see? Hard to film the entire (beacons,etc) and play. I just set up a multiball, and stepped away to get it all in frame and started the camera.
Just messin around , but…..if you would shut your lights of and give a taste woukd be much appreciated Thanks for sharing buddy .
Quoted from Zablon:What do you want to see? Hard to film the entire (beacons,etc) and play. I just set up a multiball, and stepped away to get it all in frame and started the camera.
How long have you had your pin ?
I’m just curious how hard it is to play in the dark .My best games are in the dark as I feel it keeps you on your toes .IMDN fotd mode and Rush fln mb are my favs .Can’t wait to see what this has in store for me .
Quoted from Zablon:I don't think it needs a fix really.
Thanks bud , that’s music to my ears
Quoted from brado426:One thing kind of weird is that I like the transition between the multi-ball mode back to single-ball mode better than activation of multi-ball mode. The mood goes from chaos to peace within a few seconds... and you can feel it.
That’s exactly what has me all giddy .That right there .There’s games that seem to have it all but I’ve still, to this day have yet to be engulfed with the atmosphere of any pin .Monday can’t come soon enough .I don’t even know if I want to unbox it until the apron arrives .
Quoted from moat-pin:Have you owned/played the Hobbit in home? Pretty immersive!
No I have not just on location so far .I swore WOZ would be my last widebody going down the 180 staircase but here I am
Quoted from Rob-T-800:Where can I get the screen frame and sleep chamber?
Look for Mageek in the PB Alien thread .I’m not sure if he’s making more or not but very nice guy shoot him a PM.
Quoted from Royale-W-Cheese:Ouch...lots of stairs.
Actually my 14 yr old is getting pretty strong now .As for me ……couldn’t open my hand for 30 minutes after
Quoted from Zablon:I read this as 180 step staircase and was scratching my head - where do you live? Rapunzel's tower?? You meant 180 turn.
Lmao .9 foot ceiling but the turn is real tight after I finished the basement .Standards are fine .This was a tank .
I can’t contain myself .This game is so damn incredible as is I can’t imagine what’s in store when it arrives .You guys need to officially name this mod .It deserves something fitting .You can’t show up at the Twippys with “Alien Apron Mod”
Quoted from Baggerman:Since this mod has limited reach (100 sold), we need every owner to vote for this come Twipy time!! Keep this top of mind when the vote season opens up.
Of course ,but what do you think about naming it ? In DP , Hellhouse is not called “deadpool scoop mod” and Pinstadiums has a more exiting ring to it than “brighter lights strip”.I’m not trying to name it like some people that try to name others newborns ,I’m just saying they need a name that sticks out as they will be creating more of these for different titles .
However ,I will throw some suggestions in the box I would guess a pinhead spends roughly 66% of a game staring at the lower portion of the machine .We all know the apron is there ,we just don’t “see it “. Now with the “Miniskirt” (tm), we will need to figure out how to re attach our eyeballs back in the sockets you know ,so we can see it again
F8BFB3D1-C288-4CFA-8992-7DFA8FCB23CC (resized).pngQuoted from DoorCounty:I see some Aprons have text below ALIEN that says Limited Edition. Who gets this version?
You had to state which version you had when ordering I believe .
If anyone has info (pictures)on the 3D trans that was produced for the LV I’d greatly appreciate it .I’ve been searching with no results thus far .I’ve heard he’s finished with them, but we’re only getting started with these pins landing and I’m just trying to make a decision on wether to purchase a SV and use the blue lighting or wait and see if I can find a LV or possibly another run .
Quoted from KJS:Hi...check out the Alien owners thread
Mike has a couple spare for sale or if not I can do another run
Thank you and can’t wait to see it in person .
I had mine here yesterday but nobody was home to sign for it . Now I’m camping overnight at the post office so I’m first in line
I’m hoping to get to it later this week , as without money from these other jobs I would be pinless. This game just keeps getting better , our whole house plays it and we play it more than any others when first got them .
38C74D7C-BED4-4431-99B1-250B1A55EF98 (resized).jpeg5714411C-77CF-40F0-93C3-549631C9D6D6 (resized).jpegQuoted from Red_Devils:You cannot run the app from a phone it has to be run from a PC, you need a USB cord to connect from the board to a PC to program it. You can't do this from a phone.
Also just as an FYI the app will not work on Apple devices, you will need to run it in a Windows emulator on a Mac.
Is this just if you want to customize it ? I have not checked out instructions yet might tomorrow night and hopefully install this weekend .
Quoted from Red_Devils:Yes, The app is used to customize and also to troubleshoot any issues Oh and to update the firmware to take advantage of any new updates we come up with
Thanks my man , I’ll lyk how it goes this weekend
Quoted from brado426:Please take a look at the documentation provided here. Be sure to read through the instructions and look at the video. The video summarizes everything pretty clearly.
https://www.evolutionmodsllc.com/documentation
I’ve been watching it and using the instructions .
Quoted from brado426:Please take a look at the documentation provided here. Be sure to read through the instructions and look at the video. The video summarizes everything pretty clearly.
https://www.evolutionmodsllc.com/documentation
Thank You.I did everything using just the instructions and am very close to finishing. I have not seen that video I’ll watch it as I didn’t like any screws I had for mounting ,,I’ll go get exactly what I want for it .Came with machine screws not sure on those .
Just woke up and am delighted it’s raining out .I’m painting the exterior of a house so I have all day to finish up n play . I have all the wiring done and one question I have is about the strip lights .Do they just stick on the foam with the duct tape ? I have not seen anything yet on them .
Quoted from brado426:The apron should have come with new screws.
the only screws that came with are very small machine screws .Do you have a size? i’m running to the store to get mounting screws anyway .
Quoted from brado426:It should have come with one set (2) of metric screws for the front of the apron. The 2 sets of screws, I believe, are wood screws for securing the AUX boards. You're sure you can't find 2 metric (not wood screws) in the box somewhere? They're pretty small.
Instead of filling up this thread with support talk, you could use the form on our website and we can get whatever issue resolved: https://www.evolutionmodsllc.com/contact
If I can’t get it I’ll go there ,I appreciate the help .
Quoted from brado426:The front mounting screws should be M3 8mm. I'll get this added to the documentation.
Thank You
I’m pretty much all set .Have not turned it on yet as I’m installing a new complete ring set (light blue /translucent mix) and a few other things .Will report back later .The instructions and video were spot on ,very easy to follow thanks team !
Thanks guys .That pic was before I set it .It’s flush now but had to stop the project as it’s time for trick or treaters
Quoted from JDub03:Any idea where this tab goes? Looks out of place.
[quoted image]
Is that she the right side where the acid burns are ?
It’s the single pin that connects to that board .I’m trying to find the install instructions in my email but cannot find it .
Quoted from jk2171:Thank you for replying. The store only shows the kit for the Heighway version, and the kit for the Limited Version. Will the Limited version work on an SV?
It’s a absolute must have
IMG_7204 (resized).pngYou're currently viewing posts by Pinsider kkoss24.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinball-brothers-alien-apron-amp-lighting-mod?tu=kkoss24 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.