(Topic ID: 297340)

Pinball Brothers & Heighway Alien Apron & Backbox Mod!!!!!!!

By Red_Devils

2 years ago


Topic Heartbeat

Topic Stats

  • 1,649 posts
  • 163 Pinsiders participating
  • Latest reply 11 days ago by digitaldocc
  • Topic is favorited by 71 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

20231218_194427 (resized).jpg
Screenshot_20231020_222247_Samsung Internet (resized).jpg
Screenshot_20231020_184833_Samsung Internet (resized).jpg
WhatsApp Image 2023-09-03 at 18.20.51 (resized).jpg
Software1 (resized).JPG
Software 2 (resized).jpg
Capture (resized).JPG
pasted_image (resized).png
pasted_image (resized).png
IMG_7204 (resized).png
Capture (resized).JPG
20230323_080940 (resized).jpg
pasted_image (resized).png
strobe (resized).JPG
Pic6 (resized).jpg
pic 9 (resized).jpg

You're currently viewing posts by Pinsider RPZ.
Click here to go back to viewing the entire thread.

#381 2 years ago

CEA15A6A-9B1A-4BB8-A521-A88F1C291C2A (resized).jpegCEA15A6A-9B1A-4BB8-A521-A88F1C291C2A (resized).jpeg

Is this the final design you guys are making?

#387 2 years ago
Quoted from Red_Devils:

Close but there is no acid burns on the left side and there are bullets next to the weapon ready and much more integrated light shows

Cool, will it then have the extra couple acid burns on the right like original one?

#403 2 years ago
Quoted from Red_Devils:

As stated above the original version will not fit the Pinball Brothers machine. The one we are doing will have a completely different way of connecting to the machine, we have created a new PCB board to control all of the effects including the beacons, all to be interactive with the machine.

It all sounds cool, and I’m excited to get one of these but as mentioned to Eightballtexas via PM, do you guys have a design that you can show us of the final product looks like at all? Many pictures of different aprons on first post but I’m just unsure of what I am actually getting if I put money down.

Thanks again!

#409 2 years ago
Quoted from Red_Devils:

For testing purposes we have 1 of the original aprons that was modified to fit the Pinball Brothers machine, the later videos of the apron with the acid burns lit up will be very close to the production one. The only difference will be that the new one will not have "Limited Edition" cut out. As far as the acid burns, the lettering, the weapons ready and bullets they will all be the same. We thought it was important to get all the board and connections working before we put in an order to the metal fabricators to start making the steel apron. As I've said earlier a couple of the team are on vacation for the holidays and we have also sent out the 4th iteration of the PCB board to be made and that should be ready for testing when they return. We have another meeting scheduled after the New Year to check and make sure we are ready, if everything works out with the new board then we will begin production. We can't show the "final" product until we've completed testing. We have countless hours in to this mod and be assured it will be everything we say it is and more. If you feel like holding out until we're done, just remember this is a "limited" run and when we're done we probably won't be doing it again.

Thank you very much for your response, deposit paid

#419 2 years ago

I’m excited also both for games to arrive and mods! Hoping the apron has all the holes on the right so we can do something like this

*Modding The Mod*

18A5247E-BD27-4C67-A1AD-E9B0D38CE8B8 (resized).jpeg18A5247E-BD27-4C67-A1AD-E9B0D38CE8B8 (resized).jpeg

#423 2 years ago
Quoted from AMSNL:

This is my apron I had to make the inside foam a little bigger to fit the Xeno inside . Then I used a glue gun to make the slime[quoted image]

Thanks for sharing! Well done, it looks so good. Just unsure if new aprons will have that hole also. Fingers crossed

1 month later
#493 2 years ago
Quoted from Red_Devils:

First batch of aprons are back from the fabricators, next, off to be powder coated
Things are moving along nicely.
[quoted image][quoted image]

There is still time to add “Limited Version” under Alien!

Looking good!!

1 month later
#648 2 years ago

Anyone have a video they can upload of the LV beacons in action, so I can make a decision on whether I should also get the ones that come with this mod?

Thanks!

#658 2 years ago
Quoted from henning:

as for #96 - Soundmazta wants Option 1

Same here, as per PM.

#672 2 years ago
Quoted from Royale-W-Cheese:

XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
I have not heard from below people....all 4 will be removed by tomorrow. I cant keep begging for wires to be sent.
2 of the 4 names slots below have been commited . The first 2 to respond if your wanting to send wires...then that's it.
Once we finally get the 100 confirmations we can start working on "Asking for Balances" THANK YOU ALL.
billsfanmd Option 1 No response....removing off confirmation list.
Richhouse67 Option 1 Ditto
@BackLightpro Option 2 Ditto
@Nashty Funk Option 1 ( Please respond) if you want the last 1 of the last 2 spot.
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
"Option 1" $999 with beacons OR JUST APRON "Option 2" $750
All future payments will be wires only.
All orders from Europe will be shipped from Europe. We will get shipping cost later as well for the europe orders.
USA orders will be shipped from 2 locations in Texas. Dave and I will split that to expediate all aprons.
Once we weigh the boxes with the apron and beacons all snug we will shop for best shipping rates and also start reaching out to get payments.
1) RED-DEVILS
2) EIGHTBALLTEXAS
3) BRADO426
4) ZABLON
5) JOETECHBOB
6) RUSSG
7) ZMENY
ZMNEY
ZMENY
ZMNEY
ZMENY
8) LLABNIP1972
9) ELCID95
10) KCIACCIO
11) CHOPPER36
12) DJSOUP
13) MCDOOM
14) BAGGERMAN ( Paid in Full -Wired)
15) DPECK3
16) CRILE1
17) STRAKER
18) MOJOJEDI
19) BENIME
20) GORILLABISCUIT
21) CRISPIN1
22) CAPTCHAOS ( Option 2) Paid in full. Upgrade to option one...owes $250
23) RACERX61
24) PBALLJUNKIE
25) SIXITIESKID
26) DRAIN-O
27) Gooch
28) Flipper-Happy Option 2
29) Bigdaddy07
30) ezeltmann
31) BozotheClown
32) DannyGraver
33) Batedogg ( Paid In Full)
34) Paddy-O
35) DawnP
DawnP
36) Ravenwing
37) dyopp21
38) LordHelmet
39) Moat-Pin (Paid in Full ) Option1
40) Rockrand
41) DVDA
42) Monkfe ( option 2)
43) ChubToad13 ( paid in Full Option 1)
44) Drunken_Idaho
45) Cigaretteman Shipping to to Denmark
46) Dano
47) Calprog (Option 2)
48) Delt31 (Option2)
49) CPR9999
50) Utesichiban
51) mbrave77
52) Oneangrymo
53) BOB-G
54) Lateralus ( Option 2)
55) Chosen_S
56) GreatPins Paid in full ( Option 1)
57) mjpinballs
58) FtrMech Paid in Full ( Option 2)
59) MikeHogue
60) Nstone4425
61) Deadpin ( Apron Only)
62) Jason Shipping to Australia
63) Sheriffs1 !!!!!!CANCELLED!!!
64) Aeon (Option 2) Shipping to Norway
65) Jackalwere
66 Backflipper
67 PDX Mike
68) RPZ - Option 2 Shipping to Sydney Australia
69) visualmagic
70) driph Option 2
71) TheJesman
72) Hilliguy Option 2( Changed to option 1) Feb28th
73) Ceemunkey Option 2 Shipping to Australia - Wants to upgrade to option 1
74) vlad_nada
75) Firechief81
76) oliator (Paid in full - Option 1) Shipping to Switzerland
77) aaron6920 ( Option 1-Paid In Full)
78) Henning - Option 1 ( Paid in full) Shipping to Austria
79) Sjoend - Option 1 ( paid in Full $999) Shipping to Netherlands
80) empty-m Option 2 ( Paid in Full $750)
81) Kkoss24 Option 2 ( Wired full payment)
82) Jurulz Option 1 ( Paid in Full) Ship to Canada
83) JDub03 Option 1 ( Paid in Full)
84) Billsfanmd Option 1 NEVER RECEIVED THE WIRE) please DM us if still interested
85) MarioParty Option 2 (Paid)
86) JOKERPOKER Option 2 ( Paid)
87) Makakka Option 2 ( PAID)
88) Richhouse67 Option 1 ( Incoming )
89) Fatdirk Cancelled.
90) Jecco74 Option 1 - Paid in Full
91) PaulBaptise Option 1 Paid In full
92) Nashty Funk Option 1 ( Wire Incoming)
93) BackLightpro Option 2 ( Wire Incoming )
94) brandonx76 Option 2 Paid in full
95) WCBU64 OPTION 1 (Wired us $250 deposit.)
96) Soundmazta Deposit made to felix $250- Option 1
WE MIGHT HAVE MISSED ONE OR 2 THAT CANCELLED OR WILL NOT PAY SO I AM ADDING ANOTHER BUYER FROM LAST NIGHT BELOW. CALL IT THE VERY SMALL BACK UP LIST .
1) Luscsxd Option 1( Ship to Australia) Wire info sent Friday April 1st.
2) T-800 Wire info sent....Friday April 1st.
Fees owed to collect later....no rush yet.
Zach $36.62
CaptChaos $22.17
Llabnip1972 $7.72
Kciaccio $7.72
Chosen_S $7.72
OIliator $44.35

Please update mine to Option 1

1 month later
#780 1 year ago

Hi @eightballtexas, as per PM can you please update #68 to @estrader. He is after Option 2. Thanks!

Promoted items from Pinside Marketplace and Pinside Shops!
From: $ 6.50
Playfield - Other
Rocket City Pinball
 
Trade
Machine - For Trade
Lewiston, NY
$ 69.99
Cabinet - Decals
Inscribed Solutions
 
$ 165.00
Lighting - Interactive
Evolution Mods
 
$ 50.00
Playfield - Protection
Duke Pinball
 
$ 299.99
Lighting - Interactive
Evolution Mods
 
From: $ 12.00
Flipper Parts
Precision Pinball prod.
 
9,000
Machine - For Sale
Mt Zion, IL
$ 119.99
Displays
FlyLand Designs
 
$ 99.95
Cabinet - Shooter Rods
Hookedonpinball.com
 
$ 1,375.00
Lighting - Interactive
Evolution Mods
 
$ 8,595.00
Pinball Machine
Classic Game Rooms
 
$ 12.95
$ 160.00
$ 10,695.00
Pinball Machine
Classic Game Rooms
 
6,250
Machine - For Sale
Matthews, NC
$ 35.00
Cabinet - Other
Rocket City Pinball
 
$ 19.95
Playfield - Toys/Add-ons
ULEKstore
 
From: $ 6.00
$ 12.95
Lighting - Led
Mitchell Lighting
 
$ 10,595.00
Pinball Machine
PMP Amusements
 
10,200
Machine - For Sale
Pipe Creek, TX
Great pinball charity
Pinball Edu

You're currently viewing posts by Pinsider RPZ.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/pinball-brothers-alien-apron-amp-lighting-mod?tu=RPZ and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.