(Topic ID: 249628)

Pinball Armor "Moving Armor" production run interest solicitation

By Pinball-Armor

4 years ago



Topic Stats

  • 5 posts
  • 4 Pinsiders participating
  • Latest reply 2 years ago by Mathazar
  • Topic is favorited by 7 Pinsiders

You

Linked Games

No games have been linked to this topic.

    #1 4 years ago

    Hi Friends,

    It’s been a while since Pinball Armor’s Moving Armor was available, and we have had many requests for another run, so we are gauging interest from the community. If you're not familiar with our Moving Armor system, there is information on the product line on different tabs of the spreadsheet on the Google drive in the hyperlink below.

    If you might want to purchase Moving Armor, please fill out the appropriate portion of the spreadsheet with your potential “wants” and send it back to us. Included in the sheet is pricing, which is directional. The larger the group order, the better potential there is for us to be able to lower the cost. Full transparency, the armor itself is very expensive to produce, and the only way we would ever see a significant reduction in cost would be to produce >500 units overseas, but unfortunately, we don’t have the capital nor warehouse space to make this possible.

    If there is enough overall interest, we will then send out a revised price sheet, and solicit firm commitments. Once we aggregate the commitments, we will request deposits, and produce the run. And yes, if you are ordering in multiples, we can talk about discounts. But let me state in advance that the margins are razor thin, particularly if we are producing small quantities, so discounts will not be huge. If you want multiples, this may be your one shot at getting them, unless you find them on the secondary market.

    Our support base has been awesome. We love the positive feedback on the product, you have been tremendously patient, and want to make another run just for those facts.

    Also, since we are laying everything out on the table… If anyone has the cash flow and warehouse space and the interest in partnering or licensing (yes, the system is patented), please let me know, as that would completely change the dynamics and economics for all.

    Thank you for your time and interest. If you have any questions please don’t hesitate to email. Here is the hyperlink to the Excel file. Once on the Google drive, double-click the link to the spreadsheet and then DOWNLOAD the spreadsheet. I haven't used drive much so hopefully it works.

    https://drive.google.com/drive/u/0/folders/1I0ztvNfuN4mTj7E7DrzagH7XKvDnkZle

    Sincerely,

    Darren Brehm
    [email protected]

    #2 4 years ago

    Looking forward to hopefully another run of a great product. I am in for 2 or 3 sets. Thanks

    3 weeks later
    #3 4 years ago
    Quoted from zutton1:

    Looking forward to hopefully another run of a great product. I am in for 2 or 3 sets. Thanks

    Awesome! Still soliciting interest in getting in on the run, please message me or fill out form if you are even mildly interested. No commitments at this time, just gathering a base.

    1 year later
    #4 3 years ago
    Quoted from Pinball-Armor:

    Awesome! Still soliciting interest in getting in on the run, please message me or fill out form if you are even mildly interested. No commitments at this time, just gathering a base.

    I would buy 8 of these covers. My cell is 3303960466. I see this is an older post but i am a buyer if more is needed to get some produced let me know.

    1 month later
    #5 2 years ago
    Quoted from Pinball-Armor:

    Awesome! Still soliciting interest in getting in on the run, please message me or fill out form if you are even mildly interested. No commitments at this time, just gathering a base.

    Now having the need for this, I searched and found this thread. Too late, apparently, unless there's continued interest in doing yet another run? I would be interested in 1 or 2 sets.

    The documentation says it fits most machines 1990's and up. Any chance pinball armor could also be used on 70's/80's Bally, Williams, and Stern solid states? I move those around the most.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


    This page was printed from https://pinside.com/pinball/forum/topic/pinball-armor-moving-armor-production-run-interest-solicitation?hl=dbarker and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.