I wanted to do it as cheap as possible and in the end I built 3 of them for $130 each including a tinted front sheet.

I bought:

Panels off aliexpress. They come with wiring too which is cool. Make sure they are 1:16 scan RGB(some are like GRB or something). You need 2 of them that are 80x160mm p2.5.

Stm32 discovery board with Pin2dmd shield from uncle sash. I contacted him through vpuniverse forums and Facebook but I think he's on pinside too.

12-5v 5a voltage regular off eBay for like $3. Hook to pinball 12v power, I used the same pinball connection point as colordmd uses.

I designed and 3d printed my own frame but I think you can get that from uncle sash too.

That's really all you need. feel free to contact me if you have questions. Best thing is to join the vpuniverse forums where there is a specific pin2dmd forum.

IMG_2015 (resized).JPG
IMG_2013 (resized).JPG

It's an inside joke. Taxman is a buddy of mine I think.

Taxman is the artist that colored the colordmd version.

I'm disappointed to hear this... I was really hoping you would be doing games on Pin2dmd in the future. Anyway, great job with T2 and I will certainly be able to learn by your contributions. Hoping to play around with your files today and maybe soon start working on MM. I'm hoping to change some graphics on MM slightly too in my project. Thank you for your contribution!!

Good to hear. Thank you again for the effort on this!!!!

I actually have a T2 that I was thinking about selling but now I'm definitely gonna keep it!!!