Black Knight
Williams, 1980I’ve got my BK nearly back to 100%. Lower left flipper is not working, and the wiring/solder job is a mess. I’m going to redo the solder job. And it looks like it was wired correctly, but maybe vibration and rubbing against a lug sliced a wire. Can someone verify that splicing the blue wire in the middle of the picture would be correct and/or send a pic of the correct wiring?
Thanks!!
Bob
EF7D79BE-629F-4FDF-8866-A21CF0A87E9D (resized).jpegThanks - Should have posted I’ve done an image search and checked ipdb - what I’ve found so far doesn’t have the resolution to be sure of what I’m looking at.
Quoted from bobnatlanta:Thanks - Should have posted I’ve done an image search and checked ipdb - what I’ve found so far doesn’t have the resolution to be sure of what I’m looking at.
Sold mine last week, I should have taken more repair pics. Have a metric ****ton of drop target pics from the underside if you need them. That and PSU rebuild pics.
Here’s mine, pretty sure it’s never been touched. If you need a diff angle lemme know. Okay, I double checked it.
Blue wire from Inner eos sw to center coil
Blue wire from outer eos sw lug to right lug in picture
Blue/gray wire from bundle also to right lug in picture
Quoted from bobnatlanta:Thanks!! - wired properly now, but machine gunning. Time for a new coil.
EOS switch proper?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/picture-request-black-knight-lower-left-flipper-assembly and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Atlanta, GA