Yeah since I was hanging out near there alot of the time that would have worked out nicely , but Trilogy does not have a p-roc in it so it would have been out of place at the multimorphic booth .

Got the fridge mount painted ,it will be fit up for the final time and be attached to the fridge .

20161023_211251 (resized).jpg

Also got the basket for mounting the Co2 tank painted .

20161023_211349 (resized).jpg

Fridge is now attached to the fridge mount .

20161024_001444 (resized).jpg

This is what it will look like in the back of the game with the fridge closed in . There is a lock for the fridge unit and I will be adding a handle right below the lock so the fridge unit can easily slide out when unlocked .

20161024_002242 (resized).jpg

Shot of the whole backside of the game .

20161024_003142 (resized).jpg

Yes I'm sure mgc is going to be great , if one of these 2 games were to make it there though it would be up to someone other than myself . As I consider both games sold , I do believe it is the choice of their new owners if they go to a show or not.

I did just recieve a few parts I had sent to Ron at Pinballplatingandmore.com for brass plating very happy with the resaults .

20161029_230644 (resized).jpg

20161029_230858 (resized).jpg

Turned one on for the first time tonight . Got GI and all the controlled lamps . A few spots out on 2 of the displays , new displays new boards should just be a bad connection or wiring somewhere . Selenoids fired in test mode . Flippers are not tightened in place yet , so they are not aligned in picture .

20161115_004829 (resized).jpg

20161115_004858 (resized).jpg

More pics

20161115_002530 (resized).jpg

20161115_004850 (resized).jpg

20161115_004933 (resized).jpg

Hard to take a picture of these wothout them looking washed out , the Ts in the coin slots lit up.

20161115_002516 (resized).jpg

Well the displays were an easy fix . First time I have used Pinscore displays for bally/classic stern , so maybe I did this incorrectly . The L bracket that is supposed to hold the 2 pieces togather accually holds the connectors too far apart .

20161115_194232 (resized).jpg

20161115_194245 (resized).jpg

I switched the clip around to hold the L bracket to the bottom piece (seems a bit more solid installed this way ) and left the clip out of the display part . The clip in there is what raises it too high for the connectors . Seems solid enough set up this way ,accually more solid than the way it was set up before.

20161115_194621 (resized).jpg

I checked that, brackets did not line up with holes any way I put them on .

I now have full range in all displays.

20161115_200020 (resized).jpg

Would make sense but they are not . I put an X on two to show that they are same length either dirrection .

20161115_204408 (resized).jpg

20161115_204440 (resized).jpg

Got one flipping tonight . Adjustment needed on everything but it is nice to finally have one somewhat playable .

20161123_000658 (resized).jpg

Just a picture of the front of the game fully assembled and lit up .

20161123_001716 (resized).jpg

Working on speaker/display panels .

20161207_182552 (resized).jpg

20161207_234535 (resized).jpg

Ready for clear coat .

20161208_015058 (resized).jpg

Speaker/display panels are finished.

20161209_001544 (resized).jpg

Some areas will have text that will when backlit light up for info , game over,tilt , match ,and high score .

20161209_001604 (resized).jpg

What it will look like on the game .

20161209_002239 (resized).jpg

One set has silver player numbers and will get chrome speaker grills .The other set has gold player numbers and will get brass speaker grills.

20161209_002451 (resized).jpg

Gavin Miller went through this one . Gavin is not only a good player and a good tech , but also knows how to tweek the games so they are playing as good as they can . All the mechs and everything function smoothly . This one got a decent amount of play this past Saturday . So now I just need to finish with the keg/tap system , and sound is still being worked on . Still plenty of work left but this one is getting close (the other is not far behind either ).

20161212_214338 (resized).jpg

I still need to do the backbox lighting also . So yeah a few things to go , but nice to hsve it playable .

Haven't had much time for these lately , holidays and other projects have kept me pretty busy . But I did get around to making the brackets that will hold the grain cartridge in the lamp housing .

20170107_125557 (resized).jpg

Two 9mm nuts hold everything in . And two wingnuts hold the lamp housing into the backbox . Should be real easy to swap out the grain for something else if the new owners desire to do so .

20170107_130031 (resized).jpg

20170107_160140 (resized).jpg

20170107_160311 (resized).jpg

I also got these really cool spacers for the tap from Scott Danesi . Scott Danesi is awesome!

20170107_160236 (resized).jpg

Turned on the other one for the first time . This one is now ready for Gavin Miller to go through and make it play as best as it can , just as he did wirh the other one .

20170117_210813 (resized).jpg

20170117_210829 (resized).jpg

The backglass /translites are installed and backlit . I had tempered glass made for these and Charlie (Spooky pinball ) printed the translites. Led strips off to either side give a nice consistant lighting .

20170127_215521 (resized).jpg

Yeah , it is getting there . Still a ton of work left for me to do but I can finally see the light at the end of the tunnel . These will definently be the only 2 that I will build this way with the intention of selling . I do hope that who ever ends up with these 2 really enjoy them .

Thank you , I think that would be cool to see them at a show or 2 also . Artwork, custom pieces and just the overall look and how everything will came togather looks better than the first one I made . But I could understand the new owners not wanting to take a game like this to a show . Once these games are in the hands of their new owners the future for them is not in my control.