Hello all,
I recently bought a semi working Pat Hand. The upper flipper wasnt working. Upon looking under the pf i notice a pair of wires were not connected to the coil. The question is where do they go? The lower flippers have eos switches, the upper one does not.
I read a thread that mentioned i should put both wores on the middle lug, but i just wanted to make sure. It looks like the coil at one time had things soldered onto both lugs. It is likely not the original coil, the two wires that are disconnected are twisted together.
Any help would be appreciated
Thank you,
Jared
20220802_070717 (resized).jpg20220802_070730 (resized).jpg20220802_070741 (resized).jpg
pinballdaveh
