did this a while back to help a guy out - custom rocket flame light dome - hope it helps some one out with a cool mod - even has that cool inside starburst pattern effect, but shapeways price is out of my control, sorry

https://www.shapeways.com/product/6ZEQ66VSC/party-zone-pinball-rocket-flame-light-dome?optionId=57755056

625x465_10795794_7179786_1459346062_(resized).jpg

625x465_10795791_7179786_1459346062_(resized).jpg

this was at shapeways as well

https://www.shapeways.com/product/N7GCPXEJ4/party-zone-dummy-arm?optionId=57584448
625x465_10498155_7082945_1459343121_(resized).jpg

https://www.shapeways.com/product/GMCMWLM63/party-zone-dummy-leg?optionId=57618196
625x465_10569998_7106748_1459343832_(resized).jpg

and lots of other pinball goodies there
https://www.shapeways.com/search?q=pinball&sort=newest

I can design one but would need to borrow one to model up, happy to help out

even as a starting point if someone does a tracing, some photos from different angles and some caliper dimensions I reckon I could dam close for you with a body - just reach out

I have offered before if someone could get me a worn but still intact one, I can re-design so it can be made at shapeways

glad you like the flame, happy to try and model via sent measurements / photos etc if it helps others

happy to do the body and put up at Shapeways to complete the set, just send me a pm if you can loan me a body (I will pay for reasonable postage to me and back to you and arrange for a tester to go to you for free) or send me accurate vernier dimensions.

I designed these a few years ago and I was asked to make one, send me a pm if you are interested. Party Zone Rocket Flame Dome

IMG_0212 (resized).jpeg

IMG_0213 (resized).jpeg