(Topic ID: 131458)
Bermuda Triangle
Falls Church, VA
Creative... looks like you (like I) could use ramps. If only we could "home brew" those. Thanks for sharing!
-Rob
-visit http://www.kahr.us to get my daughterboard that helps fix WPC pinball resets or for Williams system 3-7 sound board solutions
yep same ramp needs here!
hope some day a 3d printing solution or someone reproduces them
btw im using a trick my friend told me
i had problem with ball jumping of now and then so some of my ramps edges are coffered with airtube to slow down a little and guide the ball the right way
it also protects
Quoted from jorro:i had problem with ball jumping of now and then so some of my ramps edges are coffered with airtube to slow down a little and guide the ball the right way
I've never had issues with the balls riding the entire length of the ramps... perhaps the packing tape holding them together keeps the speed under control 
. Right ramp is broken right where the backbox lampboard swings and hits it while the playfield is up. The damage pre-dates me; all I've done is change out the tape some something more clear.
Your game looks nice!
-Rob
-visit http://www.kahr.us to get my daughterboard that helps fix WPC pinball resets or for Williams system 3-7 sound board solutions
there are some minor cracks but overall i cant complain
previous owner flame polished the ramps so once every 50 times a ball jumped from left top swirl over to right ramp
just to ensure no more damage i stoped that with the tubes.
but still would like new repro ones!!!
hoping some day.......
to cool of a game it deserves them!!!!!
if i hear of a new ramp kit i will inform u!!
1 month later
2 months later
Melbourne
yep same ramp needs here!
hope some day a 3d printing solution or someone reproduces them
btw im using a trick my friend told me
i had problem with ball jumping of now and then so some of my ramps edges are coffered with airtube to slow down a little and guide the ball the right way
it also protectsP_20150327_202050.jpg P_20150624_211239.jpg
Hey love to know wat leds you used in your pz. It looks grate!!! Wouldnt mind sparking my pz out like that..... cheers
Quoted from Themessenger:Any idea where I can find the right ramp or suggestions on how to repair a cracked ramp??
Good luck looking for a ramp....
3 years later
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
