(Topic ID: 208358)

Part number needed: Those little metal tubes


By CadillacMusic

1 year ago



Topic Stats

  • 11 posts
  • 8 Pinsiders participating
  • Latest reply 1 year ago by luch
  • No one calls this topic a favorite

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    One image has been uploaded to this topic. (View topic image gallery).

    IMG_0891 (resized).JPG

    #1 1 year ago

    On many Bally/Williams 90's games, they use a layered flipper ball guide, with two metal layers and the plastic on the top. At the non-flipper end, there's usually one or two screws, with little metal spacers that cover the screw between the playfield and the metal, and the two metal layers. What the heck is the part number or name for that little metal spacer? Can't find it anywhere in the manual.

    Pictured: One missing

    IMG_0891 (resized).JPG

    #2 1 year ago

    How many do you need?
    I think I have 2 spares

    #3 1 year ago

    I have been looking for the same things, three of them for a Terminator 2. They're part number 02-4020 "support post" and no one anywhere carries them, I've been searching all week with no luck.

    #4 1 year ago

    I just posted a thread on getting exploded parts views. I run into the same problem, not know what the heck something is or a part number. Exploded views of games would be nice.

    #5 1 year ago

    would small stainless tubing work cut to length ?

    #6 1 year ago
    Quoted from luch:

    would small stainless tubing work cut to length ?

    Like stainless brake lining maybe? Not sure of the outside diameter though.

    #7 1 year ago

    A quick fix until you get the part is to stack small washers.

    #8 1 year ago
    Quoted from luch:

    would small stainless tubing work cut to length ?

    I used a similar cheat on my high speed:

    https://pinside.com/pinball/forum/topic/high-speedwhat-post-goes-here

    #9 1 year ago

    They're also supposed to get a washer underneath, 1/4" OD x 1/8" ID x 1/32" thick, so that screwing them down doesn't chew into the playfield. Can't find those anywhere either.

    #10 1 year ago

    Well, at least I have the part number now. The drawing in the manual is incredibly unclear as to what it is. But yeah, if anyone knows where to find them, I could use a good half-dozen...

    Promoted items from the Pinside Marketplace
    $ 89.99
    $ 159.00
    $ 75.95
    Cabinet - Shooter Rods
    Super Skill Shot Shop
    $ 48.00
    Cabinet - Other
    ModFather Pinball Mods
    From: $ 99.99
    Cabinet - Other
    Lighted Pinball Mods
    From: $ 99.99
    $ 74.00
    Cabinet - Armor And Blades
    Id Rather Play Pinball
    $ 79.95
    Playfield - Toys/Add-ons
    pinballmod
    $ 200.00
    Lighting - Interactive
    Professor Pinball
    $ 25.00
    Cabinet - Other
    Filament Printing
    $ 40.99
    Lighting - Interactive
    Lee's Parts
    $ 79.00
    From: $ 5,799.00
    Pinball Machine
    Operation Pinball
    From: $ 218.00
    $ 69.99
    Playfield - Toys/Add-ons
    Lighted Pinball Mods
    From: $ 99.99
    Cabinet - Other
    Lighted Pinball Mods
    From: $ 369.95
    Boards
    PinSound Plus Out of stock
    PinSound
    $ 320.00
    $ 93.00
    $ 12.99
    Eproms
    Matt's Basement Arcade
    $ 5,899.99
    Pinball Machine
    Pinball Pro
    $ 235.00
    Cabinet - Toppers
    Id Rather Play Pinball
    $ 7,599.00
    Pinball Machine
    Operation Pinball

    Hey there! Got a moment?

    Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside