You're currently viewing posts by Pinsider DRDAVE.
Click here to go back to viewing the entire thread.
Quoted from paulbaptiste:Forgot to mention I swapped the solenoid board from Silverball mania in to see if it made any difference and it did not.
Did you check fuses on your power supply?
Check test points on your power supply and solenoid driver board?
Do you have another MPU to try in your Paragon?
David
www.pinballdoctor.com
Yes connectors are very suspect. Shine a flash light through the back of all the .100 pinned connectors in question and where there is a bigger gap than the others, replace those pins at minimum. You should have a good crimping tool and .100 pins. I use the ratcheting style crimper and it gives a solid perfect crimp every time.
You're currently viewing posts by Pinsider DRDAVE.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/paragon-help-2?tu=DRDAVE and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Marlborough, MA