Quoted from Foxxstone_80:Solved. I replaced the associated R9 resistor. I used the recommended 100k ohm 1/2 watt resistor and the 5th digit is working now.
Thanks for following up and providing the solution!
You're currently viewing posts by Pinsider T3quila.
Click here to go back to viewing the entire thread.
Quoted from Foxxstone_80:Solved. I replaced the associated R9 resistor. I used the recommended 100k ohm 1/2 watt resistor and the 5th digit is working now.
Thanks for following up and providing the solution!
Quoted from Foxxstone_80:It was kinda a hail Mary. I was running out of ideas, so I looked at several old threads on display issues and this was about the only thing I hadn't done yet that was recommended. I'm just happy it works now.
I'm a total noob. My first project is a paragon full restore - hare brained, i know, attempting a full restore with 0 experience. So i appreciate any and all info here, often enough when somebody finds the solution to their own problem they don't post it, so I'm very thankful that you came back to post this. Thanks again.
You're currently viewing posts by Pinsider T3quila.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/paragon-5th-digit-out-on-4th-player-display?tu=T3quila and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.