Like title says, is there a good overview of GoT mods ? got my premium yesterday but cant find a overview.
(Topic ID: 156183)
Nashua, NH
My own list:
1. Spike shaker motor
2. Premium side blades
3. Lollipop side rails
4. Plastic protectors
5. Scott's alternate translite
6. Beatmasters little sticker mod
7. Flipper Fidelity speakers
8. Routed a cable from cpu headphone jack to external sub-woofer
9. Relocated the power switch to the Tournament button knockout
10. Titan rubbers
11. Capgun's diverter mod & in lane bumpers using coil sleeves
12. Added washers under screwheads in the left orbit and elevator
13. Added mylar to the bare sheet metal surfaces behind the upper playfield exit and ramp
14. Added mylar patches to the shooter lane and side wall, just opposite the chute - I was seeing some abrasion here
In process:
1. Added 110V switched service outlet in the backbox, possibly to power:
2. Adding LED Strips in the backbox to improve perimeter lighting and color temperature
3. Waiting to see Mezel's textured castle wall final results
Good luck and enjoy~ 
Thanks!
Spike shaker motor,Beatmasters Sticker and the Stern Premium blue side blades are on order.
Think also the Battering Ram of MezzelMods is a good one to buy. thinking about anti-mirror glas
Quoted from KLR2014:thinking about anti-mirror glas
This is the best mod of them all IMO. I like the battering ram mod too by MezzleMods, but will hold off to see castle walls. Didn't know about that one. 
Quoted from Toasterdog:This is the best mod of them all IMO
My favorite is the relocated power switch. I smile each and every time I step up to the machine and flip on the power - without reaching!
Quoted from markp99:My favorite is the relocated power switch. I smile each and every time I step up to the machine and flip on the power - without reaching!
yes will do that too, is there a complete set to buy ?
Quoted from modfather:I have a bunch of different GOT mods at http://www.modfatherpinball.com
will take a look!
where can I find the gold speaker grills in your shop ?
Quoted from KLR2014:yes will do that too, is there a complete set to buy ?
Nope, just assembled the pieces:
DPDT switch that fits the knockout hole
Quick disconnect terminals
16 AWG wire
30 minutes of effort
https://pinside.com/pinball/forum/topic/relocating-the-pwr-switch-on-spike-system-like-got
Promoted items from Pinside Marketplace and Pinside Shops!
Rockland, ON
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
