Back to the Future: The Pinball
Data East, 1990You're currently viewing posts by Pinsider Hadojae.
Click here to go back to viewing the entire thread.
Fairly new to pinball repair and working on my BTTF. Latest issue is that I cannot get the outhole kicker coil to fire. I was able to confirm that the outhole switch is recognized in test mode and when I attempt to test the coil all I hear is the relay click on the PSU. All other coils in the game fire properly as far as I can tell. Swapped out all the fuses on the power supply board. Continuing to troubleshoot and learn, but figured I would ask for help on the way.
Quoted from LTG:Meter in hand. Check wiring from coil to board to see if you have a break or not. Check solder joints on coil lug, especially the thin wire from the coil to the lugs, for cracks or breaks.
LTG : )
Confirmed, did all that and then realized i had the wires reversed on the coil. Ugh.
Thanks 
You're currently viewing posts by Pinsider Hadojae.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/outhole-kicker-not-firing?tu=Hadojae and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
