(Topic ID: 296689)

Operation wolf

By arcadebeast

2 years ago


Topic Heartbeat

Topic Stats

  • 16 posts
  • 5 Pinsiders participating
  • Latest reply 2 years ago by manadams
  • No one calls this topic a favorite

You

Topic Gallery

View topic image gallery

image (resized).jpg
image (resized).jpg
image (resized).jpg
operation-wolf-arcade-plus-extra_1_3e05fdcbcd2dfc7590d0b23d94479095 (resized).jpg
8BD4DF42-5E6A-4C0E-BEF6-C7BA736DF1A8 (resized).jpeg
E5E4A3BF-AAC0-4E0A-A881-AB3BB92BF6DA (resized).jpeg

You're currently viewing posts by Pinsider manadams.
Click here to go back to viewing the entire thread.

#6 2 years ago

Try re-seating all socketed chips on the boards.

#9 2 years ago

To rule out the speaker or speakers you can adjust the volume POT and you should hear static at least. Volume POT is usually on board somewhere or right inside coin door. If you follow those unconnected wires backwards do they lead to your speakers?

#10 2 years ago

Looks like you have two volume POT'S, one for left and for right speaker. They are the white knobs right next to the silver heat sinks in the picture

.

operation-wolf-arcade-plus-extra_1_3e05fdcbcd2dfc7590d0b23d94479095 (resized).jpgoperation-wolf-arcade-plus-extra_1_3e05fdcbcd2dfc7590d0b23d94479095 (resized).jpg
#11 2 years ago

If you're missing a molex connector at the "M" location then that may be the location your loose wires go to and be the sound issue.

#16 2 years ago

Looking at the schematic that "M" location says motor and rocket. Does your gun motor vibrate and does the rocket launcher button work? My guess is that molex plug goes to the "M" location with the red/white stripe furthest away from the "M" and that black wire came out of the molex plug closest to the "M" just looking at the board picture above.

You're currently viewing posts by Pinsider manadams.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/operation-wolf-?tu=manadams and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.