Good evening all
Hoping I can get some help.
Trying to get my Operated wolf up and running.
Power supply checked out good, getting +5 at chip , cleaned all pin connectors. Also I have a wire I don’t know where it goes. And a green wire in back that I don’t know where it goes. I will add pic of it later. All I’m getting on screen is a blue scrambling Image. Any one have any idea where else I should be looking. Or know of someone that works on these boards? Thank u for any help in advance

8BD4DF42-5E6A-4C0E-BEF6-C7BA736DF1A8 (resized).jpeg

E5E4A3BF-AAC0-4E0A-A881-AB3BB92BF6DA (resized).jpeg

Hey habo.
I posted on klov but not one response.

Would that affect it? I thought that board is sound.

I’ll do that. Let u know what happens. Thanks manadams

Hey manadams.
So I re-seated all chips and also changed power supply. Even though it tested fine, l had one sitting on the shelf so why not. Anyway, it’s up and running but no sound. Any ideas? Thanks.

I’ll fallow the wires and see where they go. I keep u updated. Thanks again for helping. Can’t wait to add this to my collection.

So I had a chance to work on this today.
There’s no harness to go to N location on sound board. But I think that the wire line up is wrong on this on connector that goes to the M location on the mpu. I have schematic but don’t know how to read them. Does anyone have a pick of this connector?

image (resized).jpg

image (resized).jpg

I also came across this connector that goes to nothing

image (resized).jpg